The Technomancer

The Technomancer, a 2016 action RPG, presents an interesting test for the AMD Ryzen 5 7400F and AMD Radeon RX 7800 XT combination. This pairing represents a modern mid-range CPU with a capable upper-mid-range GPU, and the measured frame rates across resolutions and settings reveal a system that is clearly GPU-bound at higher fidelity presets, while the CPU shows its strength at lower resolutions. The data indicates a smooth experience at 1440p and a highly playable one at 4K, with the GPU's 16 GB of VRAM and high bandwidth proving more than sufficient for this title.

Resolution Scaling

The most telling data point from the benchmark results is how average frame rates scale from 1080p to 4K. At High settings, the system delivers an average of 138 FPS at 1920x1080, which drops to 90 FPS at 2560x1440, and further to 50 FPS at 3840x2160. This represents a 36% reduction in frame rate from 1080p to 1440p and a 44% reduction from 1440p to 4K. The scaling pattern is consistent with a GPU-bound scenario; as the resolution increases, the pixel throughput demand grows, and the graphics card becomes the primary limiting factor.

The scaling at Ultra settings follows a similar trajectory, though the absolute numbers are lower. At 1080p Ultra, the average is 108 FPS, which falls to 70 FPS at 1440p and bottoms out at 39 FPS at 4K. The percentage drops are steeper at the highest preset, which is typical for a game that is sensitive to the increased shader and texture work that Ultra settings impose. The fact that the 4K Ultra result is below the standard 60 FPS threshold suggests that users seeking a locked 60 FPS experience at 4K will need to compromise on settings, likely dropping to High or Medium.

The gap between Low and Ultra settings at each resolution is also informative. At 1080p, the spread is enormous: 210 FPS at Low versus 108 FPS at Ultra. This 102 FPS difference indicates that the CPU is capable of feeding the GPU far more frames than the GPU can render at higher presets. At 4K, the spread narrows to 37 FPS (76 FPS at Low versus 39 FPS at Ultra), which reinforces the idea that the GPU is the bottleneck at that resolution, regardless of the settings chosen. The analysis shows that the Ryzen 5 7400F, with its 6 cores and 12 threads, provides ample headroom for this game at lower resolutions, but the RX 7800 XT's workload becomes the determining factor as resolution climbs.

How This Combo Ranks

Within the benchmark database, this specific CPU and GPU combination holds a rank of 900 out of 2825 tested combos for The Technomancer. This places it in the 68th percentile of all combinations, indicating that it outperforms the majority of systems tested for this title. This is a solid result for a pairing that is not at the extreme high-end of either component category. The rank suggests that while there are many faster systems, this combo delivers a performance level that is well above the median for the game.

The CPU's percentile ranking against all processors is 83, which is notably high. This indicates that the Ryzen 5 7400F is a strong performer in general CPU workloads, which aligns with its Cinebench R23 multi-core score of 21765. The GPU, however, holds a percentile rank of 51 against all graphics cards, meaning it sits almost exactly in the middle of the distribution. This contrast is key to understanding the combo's overall rank: the CPU is pulling its weight and then some, while the GPU is a more average performer in the broader database. The combination rank of 900 is therefore a reflection of the GPU's more modest standing, even though it is fully capable of running this game well.

Comparing the CPU to its nearest rivals in the database, the Ryzen 5 7400F is essentially tied with the Intel Core i5-14600T, showing a delta of just 0.1% in average benchmark score. It is also within 0.3% of the AMD Ryzen AI 7 PRO 360 and 0.2% of the Intel Core Ultra 7 155H. The only rival with a negative delta is the AMD Ryzen 7 PRO 6850H, which is 0.2% slower. These tightly grouped scores indicate that the Ryzen 5 7400F is a very competitive mid-range processor, and its performance in this game is unlikely to be a limiting factor compared to any of these alternatives.

GPU Role

The AMD Radeon RX 7800 XT is built on the RDNA 3.0 architecture and features 16 GB of GDDR6 memory on a 256-bit bus, providing a memory bandwidth of 624.1 GB/s. For a game like The Technomancer, which was released in 2016, this memory configuration is more than adequate. The 16 GB capacity ensures that texture loading and asset streaming at 4K Ultra will not exceed the VRAM limit, which could cause stuttering or texture pop-in on cards with less memory. The high bandwidth also helps maintain consistent frame times, as the GPU can quickly access the data it needs.

The GPU's clocks are listed with a base of 1295 MHz, a game clock of 2124 MHz, and a boost clock of 2430 MHz. These clock speeds are typical for the RX 7000 series and contribute to the card's overall compute performance of 37.32 TFLOPS for FP32 operations. In the context of The Technomancer, these specifications translate to the measured frame rates. The card's average benchmark score in the database is 11627, with a percentile rank of 51 against all GPUs. Interestingly, its nearest rivals include the NVIDIA GeForce GTX 1660, which has a delta of -0.5%, and the AMD Radeon RX 6500 XT, which is 1.8% faster in average score. This is a peculiar grouping, as the RX 7800 XT is a much more powerful card in real-world gaming than these older or lower-tier parts, but the benchmark averages place them in a similar band.

The 4K High result of 50 FPS and 4K Ultra result of 39 FPS show that the GPU is the primary bottleneck at this resolution. The card has the raw compute power to render the game, but it cannot maintain high frame rates at the highest settings. This is not a criticism of the GPU but rather a reflection of the demanding nature of 4K rendering. At 1440p, the card performs much better, delivering 90 FPS at High and 106 FPS at Medium, which are excellent results for a smooth gaming experience. The data shows that the RX 7800 XT is best suited for 1440p gaming in this title, where it can easily push past the 60 FPS mark at most settings.

Measured FPS Breakdown

At 1920x1080, the system shows its maximum potential. With Low settings, the average frame rate is 210 FPS, which drops to 162 FPS at Medium, 138 FPS at High, and 108 FPS at Ultra. The Medium setting also has reported minimum and maximum FPS of 137 and 186, respectively. These numbers indicate that the CPU is capable of driving extremely high frame rates, but the GPU's workload at Ultra settings limits the output to just over 100 FPS. For competitive or high-refresh-rate gaming at 1080p, this combo would be excellent, as even the Ultra preset provides well over 100 FPS.

Moving to 2560x1440, the frame rates remain strong. Low settings produce an average of 137 FPS, Medium yields 106 FPS (with a min of 90 and max of 121), High gives 90 FPS, and Ultra drops to 70 FPS. This resolution appears to be the sweet spot for this combination. The High preset's 90 FPS average is ideal for a 144Hz monitor, and even the Ultra preset's 70 FPS is smooth enough for most players. The scaling from 1080p to 1440p is roughly a 35% performance hit at High settings, which is expected given the increase in pixel count.

At 3840x2160, the GPU becomes the clear limiting factor. Low settings deliver an average of 76 FPS, which is still playable. Medium settings yield 58 FPS (with a min of 49 and max of 67), High drops to 50 FPS, and Ultra falls to 39 FPS. The gap between Medium and High at 4K is only 8 FPS, suggesting that the game's High preset introduces effects that are particularly taxing on the GPU at this resolution. For a locked 60 FPS experience at 4K, users will need to use Low settings, while Medium settings offer a playable 58 FPS average that may be acceptable for a slower-paced RPG. The data clearly shows that this combo is not designed for max-settings 4K gaming, but it handles 1440p with ease.

FAQ

Q: What is the average FPS at 1440p with High settings?

A: The average frame rate at 2560x1440 with High settings is 90 FPS.

Q: Can this system handle 4K gaming in The Technomancer?

A: Yes, but with compromises. At 4K Low, the average FPS is 76, which is playable. At 4K Medium, it drops to 58 FPS, and at 4K Ultra, it falls to 39 FPS. For a smooth 60 FPS experience, users should stick to 4K Low.

Q: How does the CPU compare to its nearest rivals in the database?

A: The AMD Ryzen 5 7400F shows a delta of 0.1% against the Intel Core i5-14600T, 0.2% against the Intel Core Ultra 7 155H, and 0.3% against the AMD Ryzen AI 7 PRO 360. It is 0.2% faster than the AMD Ryzen 7 PRO 6850H.

Q: What is the GPU's memory configuration?

A: The AMD Radeon RX 7800 XT has 16 GB of GDDR6 memory on a 256-bit bus, with a memory bandwidth of 624.1 GB/s.

Q: What is the best resolution to use for this combo?

A: Based on the data, 2560x1440 is the best resolution. At High settings, it delivers an average of 90 FPS, and even at Ultra, it maintains 70 FPS, providing a smooth experience across all presets.

Q: Does the 4K Ultra setting produce a playable frame rate?

A: The average FPS at 4K Ultra is 39, which is below the standard 60 FPS target. This is not ideal for a smooth experience, and users would need to lower settings to improve performance.

CPU Role

The AMD Ryzen 5 7400F is a 6-core, 12-thread processor based on the Zen 4 architecture, manufactured on a 5 nm process. It has a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a total L3 cache of 32 MB shared across all cores. This CPU's performance in synthetic benchmarks is strong, with a Cinebench R23 multi-core score of 21765 and a single-core score of 3072. These results place the processor in the 83rd percentile against all CPUs, indicating that it is a top-tier performer in its class.

In The Technomancer, the CPU's role is to manage game logic, physics, and draw calls. The benchmark data suggests that it is not a bottleneck at any resolution tested. At 1080p Low, the system achieves 210 FPS, which is a clear sign that the CPU can supply frames at a very high rate. Even at 1080p Ultra, the 108 FPS average shows that the processor is not holding back the GPU. The high single-thread performance of 3072 in Cinebench R23 is particularly relevant for older games like The Technomancer, which may rely heavily on a single core for main thread updates.

The CPU's nearest rivals in the database all have very similar average benchmark scores, with deltas of less than 0.3%. This indicates that, for this game, the choice between the Ryzen 5 7400F and its competitors would result in nearly identical performance. The processor's 6 cores and 12 threads are sufficient to handle the game's workload without issue. The measured results show that the CPU portion of this combo is more than capable, and the overall frame rates are dictated almost entirely by the GPU's capabilities, particularly at higher resolutions and settings. The data confirms that the Ryzen 5 7400F provides a solid foundation for the RX 7800 XT in this title.