Archeage
This combination provides smooth gameplay with an average of 95 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 30 | 44 | 65 | 73 |
| 1440p QHD | 53 | 77 | 114 | 128 |
| 1080p Full HD | 78 | 115 | 169 | 190 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Archeage with AMD Ryzen 5 7400F + AMD Radeon RX 7800 XT, In-Depth Analysis
The AMD Ryzen 5 7400F and AMD Radeon RX 7800 XT combination delivers a distinct performance profile in Archeage, a 2014 MMORPG. The measured data shows a system that is capable of high frame rates at mainstream resolutions but faces clear limitations when pushed to 4K with maximum settings. This analysis breaks down the measured FPS across resolutions and settings, examines the role of each component, and contextualizes the combo’s standing among 2,761 tested configurations.
GPU Role — VRAM, clocks, and how they relate to this game's results
The AMD Radeon RX 7800 XT is built on the RDNA 3.0 architecture with the Navi 32 chip, manufactured on a 5 nm process at TSMC. It packs 16 GB of GDDR6 memory on a 256-bit bus, yielding a bandwidth of 624.1 GB/s. The GPU’s base clock is 1295 MHz, with a game clock of 2124 MHz and a boost clock of 2430 MHz. Memory runs at 2438 MHz, translating to 19.5 Gbps effective. With 3840 shading units, 240 TMUs, and 96 ROPs, the card also features 60 RT cores and delivers 37.32 TFLOPS of FP32 performance.
In Archeage, the GPU’s role becomes evident when comparing settings at a fixed resolution. At 1920x1080, the average frame rate drops from 190 FPS on Low settings to 169 FPS on Medium, then to 115 FPS on High, and finally to 78 FPS on Ultra. This scaling shows that even at 1080p, the graphics load increases substantially with each preset tier. The 16 GB VRAM is more than sufficient for a 2014 MMORPG, even at 4K, so memory capacity is not a bottleneck. Instead, the compute and shading throughput of the RX 7800 XT determines the frame rate ceiling.
The GPU’s 51st percentile ranking among all GPUs, based on its average benchmark score of 11,627, places it in the middle of the pack. Its nearest rivals in synthetic benchmarks include the NVIDIA GeForce GTX 1660 (average score 11,680, deltaPct -0.5%) and the AMD Radeon RX 6500 XT (average score 11,842, deltaPct -1.8%), indicating that the RX 7800 XT’s raw compute scores are comparable to much older or lower-tier cards. However, in actual game performance, the 16 GB VRAM and modern architecture allow it to handle higher resolutions and settings without memory-related stutters. The measured FPS at 4K High (44 FPS) versus 4K Low (73 FPS) confirms that the GPU is the primary driver of performance differences across settings, as the CPU remains constant.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The measured data reveals a clear pattern of frame rate degradation as resolution increases. Starting at 1920x1080 with High settings, the system averages 115 FPS. Moving to 2560x1440 High, that figure falls to 77 FPS, a reduction of approximately 33%. At 3840x2160 High, the average drops further to 44 FPS, which is about 62% lower than the 1080p result. This steep decline indicates that the GPU is the limiting component at higher resolutions, as the CPU’s workload does not scale with pixel count.
At Low settings, the scaling is even more pronounced. The system achieves 190 FPS at 1080p, 128 FPS at 1440p, and 73 FPS at 4K. The percentage drops from 1080p to 1440p (about 33%) and from 1440p to 4K (about 43%) show that the GPU is increasingly strained as pixel output multiplies. For a 2014 MMORPG, the rendering engine is not particularly demanding by modern standards, but the RX 7800 XT still shows a typical resolution curve.
The Medium settings row provides min and max FPS values, which add context. At 1080p Medium, the average is 169 FPS, with a minimum of 144 FPS and a maximum of 195 FPS. At 1440p Medium, the average is 114 FPS, with a minimum of 97 FPS and a maximum of 131 FPS. At 4K Medium, the average is 65 FPS, with a minimum of 55 FPS and a maximum of 75 FPS. The min-to-max spread narrows as resolution rises, suggesting that frame pacing becomes more consistent when the GPU is more heavily loaded. This further supports the conclusion that the GPU is the bottleneck at higher resolutions, while at 1080p, the CPU may be limiting the upper bounds of the frame rate.
The data indicates that 1080p and 1440p are the sweet spots for this combo, with 4K being playable only at Low or Medium settings. The 73 FPS average at 4K Low is respectable, but the 30 FPS average at 4K Ultra shows that the GPU cannot sustain high settings at that resolution. This resolution scaling behavior is typical of a mid-range GPU paired with a capable CPU, where the GPU becomes the dominant constraint as pixel count increases.
Settings Recommendations — which preset gives the best experience per the measured rows
Based on the measured FPS, the optimal settings depend heavily on the target resolution and desired frame rate. At 1920x1080, the High preset delivers 115 FPS, which is smooth for an MMORPG, while Ultra drops to 78 FPS. The Medium preset offers 169 FPS, which is excellent for competitive play or high-refresh-rate monitors. Given that the minimum FPS at Medium is 144 FPS, this preset provides a consistently high frame rate with no noticeable dips. Therefore, at 1080p, Medium is the best balance, as it nearly doubles the Ultra frame rate while maintaining visual quality above Low.
At 2560x1440, the High preset yields 77 FPS, which is playable but not ideal for fast-paced combat. Medium improves this to 114 FPS, with a minimum of 97 FPS, making it the recommended choice for a smooth 1440p experience. Ultra at 1440p drops to 53 FPS, which is borderline for an MMORPG but may be acceptable for slower gameplay. Low at 1440p offers 128 FPS, but the visual degradation is significant. The data suggests that Medium is the sweet spot at 1440p, offering a 48% improvement over High in average FPS while still maintaining acceptable visuals.
At 3840x2160, the situation is more constrained. High settings produce 44 FPS, which is below the 60 FPS threshold for smooth gameplay. Medium improves to 65 FPS, with a minimum of 55 FPS, making it the only preset that approaches playable frame rates at 4K. Low settings achieve 73 FPS, which is smoother but sacrifices visual fidelity. Ultra at 4K is effectively unplayable at 30 FPS. For 4K users, Medium is the recommended preset, as it provides the highest average FPS above 60 while retaining some graphical detail. Low is a fallback for those who prioritize frame rate over visuals.
Across all resolutions, the Ultra preset consistently shows a steep performance penalty, likely due to advanced shading or post-processing effects in Archeage. The data indicates that Medium offers the best experience per measured row, as it maintains high average FPS and reasonable minimums. High is a viable alternative for those who prefer better visuals, but the frame rate cost is substantial, especially at 1440p and 4K.
FAQ — 4-6 Q&A pairs answerable from FACT PACK data
Q: What is the average FPS at 1920x1080 with High settings?
A: The measured average FPS is 115, with no min or max values reported for this configuration.
Q: How does the RX 7800 XT compare to its nearest rival in synthetic benchmarks?
A: The RX 7800 XT has an average benchmark score of 11,627, while the NVIDIA GeForce GTX 1660 scores 11,680, a deltaPct of -0.5%. The AMD Radeon RX 6500 XT scores 11,842, which is 1.8% higher.
Q: What is the combo’s rank among all tested combinations in Archeage?
A: The combo ranks 903rd out of 2,761 tested combinations, placing it in the top third of all configurations.
Q: What is the minimum FPS at 2560x1440 with Medium settings?
A: The minimum FPS is 97, with an average of 114 FPS and a maximum of 131 FPS.
Q: Does the CPU have integrated graphics?
A: No, the AMD Ryzen 5 7400F has no integrated graphics (listed as N/A), so a discrete GPU is required for display output.
Q: What is the boost clock of the AMD Ryzen 5 7400F?
A: The boost clock is 4.70 GHz, with a base clock of 3.70 GHz, across 6 cores and 12 threads.
CPU Role — cores, clocks, and how they relate to this game's results
The AMD Ryzen 5 7400F is a 6-core, 12-thread processor from the 7000 series, based on the Zen 4 architecture (codenamed Raphael). It operates at a base clock of 3.70 GHz and a boost clock of 4.70 GHz, with a TDP of 65 W. The CPU has 64 KB of L1 cache per core, 1 MB of L2 cache per core, and 32 MB of shared L3 cache. It supports DDR5 memory in dual-channel mode, with a memory bandwidth of 83.2 GB/s. The processor is manufactured on a 5 nm process at TSMC, with 6,570 million transistors on a 71 mm² die.
In Archeage, the CPU’s role is most apparent at lower resolutions and settings, where the GPU is not fully utilized. At 1080p Low, the system achieves 190 FPS, which is likely near the CPU’s limit for this game’s engine. The single-thread performance of the Ryzen 5 7400F, as measured by a Cinebench R23 single-core score of 3,072, is strong for a 2014 MMORPG that may rely on legacy single-threaded code. The multi-core score of 21,765 in Cinebench R23 also ensures that background tasks or large player populations do not cause frame drops.
The CPU’s 83rd percentile ranking among all CPUs, with an average benchmark score of 32,750, places it above most processors. Its nearest rivals include the Intel Core i5-14600T (average score 32,707, deltaPct 0.1%) and the AMD Ryzen 7 PRO 6850H (average score 32,812, deltaPct -0.2%). This indicates that the 7400F is competitive with mid-range and some high-end laptop processors, offering solid single-thread and multi-thread performance for gaming.
The measured FPS data supports the CPU’s role as a capable partner to the GPU. At 1080p Medium, the average FPS is 169, which is high but not at the Low preset’s 190 FPS. This gap suggests that the CPU is not the limiting factor at Medium settings, as the GPU has more work to do. However, at 1080p Low, the 190 FPS average may be constrained by the CPU’s ability to feed the GPU with draw calls. The 12 threads and 4.70 GHz boost clock are sufficient for Archeage, which is not a heavily threaded game by modern standards. The CPU’s 32 MB of L3 cache also helps with game asset streaming, reducing potential stutter in large open-world areas.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
The measured FPS data provides a complete picture of performance across three resolutions and four settings presets. Starting at 1920x1080, the Low preset delivers an average of 190 FPS. Medium increases the visual load, resulting in an average of 169 FPS, with a minimum of 144 FPS and a maximum of 195 FPS. High settings reduce the average to 115 FPS, while Ultra drops to 78 FPS. The 1080p results show a clear hierarchy, with Low being the fastest and Ultra the slowest.
At 2560x1440, the Low preset averages 128 FPS. Medium averages 114 FPS, with a minimum of 97 FPS and a maximum of 131 FPS. High settings deliver 77 FPS, and Ultra falls to 53 FPS. The 1440p results show a similar pattern to 1080p, but with lower absolute numbers. The gap between Low and Medium is only 14 FPS, while the gap between Medium and High is 37 FPS, indicating that High settings impose a significant performance cost.
At 3840x2160, the Low preset averages 73 FPS. Medium averages 65 FPS, with a minimum of 55 FPS and a maximum of 75 FPS. High settings deliver 44 FPS, and Ultra drops to 30 FPS. The 4K results show that only Low and Medium are playable, with High and Ultra falling below 60 FPS. The Medium preset’s minimum of 55 FPS is close to the 60 FPS target, but the average of 65 FPS suggests that most of the time, the experience is smooth.
Across all resolutions, the Medium preset consistently provides the most balanced performance, with minimum FPS values that are not drastically lower than the averages. For example, at 1080p Medium, the minimum is 144 FPS, which is 85% of the average. At 1440p Medium, the minimum is 97 FPS, which is 85% of the average. At 4K Medium, the minimum is 55 FPS, which is 85% of the average. This consistency indicates that the Medium preset does not cause severe frame spikes, making it a reliable choice.
The High and Ultra presets, by contrast, show larger relative drops. At 1080p Ultra, the average is 78 FPS, which is 41% lower than High’s 115 FPS. At 1440p Ultra, the average is 53 FPS, which is 31% lower than High’s 77 FPS. At 4K Ultra, the average is 30 FPS, which is 32% lower than High’s 44 FPS. These steep reductions suggest that Ultra settings enable effects that are disproportionately expensive on the RX 7800 XT.
How This Combo Ranks — use comboRankInGame vs other tested combos
The AMD Ryzen 5 7400F and AMD Radeon RX 7800 XT combination ranks 903rd out of 2,761 tested combos in Archeage. This places the system in the 67th percentile of all configurations, meaning that roughly two-thirds of tested combos perform better. In a game released in 2014, this ranking reflects the fact that many newer or higher-end systems can achieve higher frame rates, particularly at 1080p and 1440p.
The rank of 903 suggests that while this combo is capable, it is not at the top of the performance hierarchy. The RX 7800 XT’s 51st percentile ranking among GPUs and the Ryzen 5 7400F’s 83rd percentile ranking among CPUs indicate that the CPU is relatively stronger than the GPU in synthetic benchmarks. However, in Archeage, the GPU is the primary bottleneck at higher resolutions, as evidenced by the large FPS drops from 1080p to 4K.
Compared to other combos, this system’s performance is solid but not exceptional. The CPU’s nearest rivals, such as the Intel Core i5-14600T (deltaPct 0.1%) and the AMD Ryzen 7 PRO 6850H (deltaPct -0.2%), show that the 7400F is on par with other mid-range processors. The GPU’s nearest rivals, including the NVIDIA GeForce GTX 1660 (deltaPct -0.5%) and the AMD Radeon RX 6500 XT (deltaPct -1.8%), suggest that the RX 7800 XT’s synthetic scores are similar to older or lower-tier cards, but its real-world performance in Archeage is better due to higher VRAM and modern features.
The combo’s rank of 903 out of 2,761 means that it outperforms 1,858 other combinations. This is a respectable position for a mid-range setup. The data shows that at 1080p, this combo delivers high frame rates across all settings, with the Low preset hitting 190 FPS. At 1440p, it remains playable at Medium and High. At 4K, it is limited to Low and Medium for smooth gameplay. The ranking reflects this versatility, as the system can handle a range of resolutions and settings, albeit not at the highest levels.
In summary, this combo is best suited for 1080p and 1440p gaming in Archeage, with the ability to maintain high frame rates at Medium or High settings. The 4K experience is possible but requires sacrificing settings. The rank of 903 shows that this is a mid-tier performer, not a top-tier one, but it offers a balanced experience for a 2014 MMORPG.
Hardware Specifications
AMD Ryzen 5 7400F
AMD Radeon RX 7800 XT
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 7400F + AMD Radeon RX 7800 XT in Archeage
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 73.0 |
| 3840x2160 | Medium | 65.0 |
| 3840x2160 | High | 44.0 |
| 3840x2160 | Ultra | 30.0 |
| 2560x1440 | Low | 128.0 |
| 2560x1440 | Medium | 114.0 |
| 2560x1440 | High | 77.0 |
| 2560x1440 | Ultra | 53.0 |
| 1920x1080 | Low | 190.0 |
| 1920x1080 | Medium | 169.0 |
| 1920x1080 | High | 115.0 |
| 1920x1080 | Ultra | 78.0 |
Archeage with Ryzen 5 7400F + Other GPUs
See how Archeage performs with the same CPU but different graphics cards.
Archeage with RX 7800 XT + Other CPUs
See how Archeage performs with the same GPU but different processors.
Other Games with Ryzen 5 7400F + RX 7800 XT
Explore FPS benchmarks for other games using this same hardware combination.