The Long Drive
This combination delivers exceptional performance with an average of 138 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 40 | 59 | 91 | 109 |
| 1440p QHD | 72 | 104 | 166 | 200 |
| 1080p Full HD | 107 | 157 | 247 | 304 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
The Long Drive with AMD Ryzen 5 8400F + NVIDIA GeForce RTX 5070, In-Depth Analysis
The AMD Ryzen 5 8400F and NVIDIA GeForce RTX 5070 pairing delivers a remarkably consistent experience in The Long Drive, but the data reveals a clear shift in bottleneck behavior depending on your target resolution. At 1080p, this combination is heavily CPU-bound, as evidenced by the massive frame rate headroom. The gap between Low and Ultra settings at 1920x1080 is a 196.9 FPS spread (303.8 FPS vs 106.9 FPS), indicating that the GPU has plenty of untapped potential even at the highest settings. The CPU’s 12 threads and 4.70 GHz boost clock are sufficient to feed the RTX 5070’s 30.87 TFLOPS of compute power, but the game’s engine appears to cap out around the 300 FPS mark. As you move to 2560x1440, the dynamic shifts. The average FPS at High settings drops to 103.8, which is a 33.8% reduction from the 156.9 FPS seen at 1080p High. This scaling pattern suggests the GPU is now the primary limiter, as the pixel count increase from 2.07 million to 3.69 million outpaces the CPU’s ability to maintain the same frame rate. By 4K, the GPU is fully saturated; the High preset yields 59.4 FPS, which is just above the 60 Hz refresh threshold. The Ultra preset at 4K, however, craters to 40.2 FPS, showing that the RTX 5070’s 12 GB of GDDR7 memory and 672.0 GB/s bandwidth are stretched thin by the combination of high resolution and maximum detail settings. The data clearly shows that this combo is a 1440p champion, with 1080p being wasted potential and 4K requiring careful settings management.
How This Combo Ranks
In the grand scheme of tested hardware combinations, the Ryzen 5 8400F + RTX 5070 pairing sits at rank 307 out of 1734 total combos in The Long Drive. This places it in the top 17.7% of all configurations tested, which is a strong showing for a mid-range CPU paired with a high-end GPU. The CPU itself scores in the 82nd percentile against all processors, with an average benchmark score of 25064. Its nearest rivals in synthetic testing include the AMD Ryzen 7 2700X (25057, 0% delta), the AMD Ryzen AI 5 PRO 340 (25099, -0.1% delta), and the AMD Ryzen 5 7500F (24993, 0.3% delta). This means the 8400F is effectively performance-identical to these chips in general compute, but its Zen 4 architecture and 4 nm process node give it a modern feature set that helps in gaming workloads. The GPU, meanwhile, sits in the 83rd percentile against all graphics cards, with an average benchmark score of 41687. Its closest rivals are the AMD Radeon Pro 5300 (41610, 0.2% delta), the NVIDIA Tesla M40 (41897, -0.5% delta), and the NVIDIA GeForce RTX 3090 (41441, 0.6% delta). The fact that the RTX 5070 is within 0.6% of the RTX 3090 in synthetic benchmarks is notable, but in this specific game, the 12 GB VRAM buffer proves to be a more critical factor than raw compute. The rank of 307 reflects a system that is well-balanced for 1440p gaming but falls behind higher-tier combos at 4K Ultra due to the GPU’s memory limitations.
FAQ
*Q: Is the RTX 5070’s 12 GB VRAM enough for The Long Drive at 4K?*
A: The data suggests it is sufficient for High settings, yielding 59.4 FPS at 3840x2160. However, the Ultra preset drops to 40.2 FPS, indicating that the 12 GB frame buffer is likely a limiting factor when texture quality and draw distances are maxed out at 4K.
Q: Can this combo hit 144 FPS at 1440p?
A: Yes, but only on lower presets. At 2560x1440, the Low preset achieves 200.4 FPS, and Medium hits 166 FPS. High settings fall to 103.8 FPS, which is below the 144 FPS threshold, so you would need to stick with Medium or Low for high-refresh-rate 1440p monitors.
Q: How does the CPU compare to its direct predecessor in this game?
A: The Ryzen 5 8400F scores 20851 in Cinebench R23 multi-core, which is a strong result. Its nearest rival, the Ryzen 5 7500F, has a synthetic score that is 0.3% higher, meaning they are functionally equivalent in compute-heavy scenarios. In gaming, the 8400F’s 6 cores and 12 threads are sufficient, as the frame rates at 1080p Low (303.8 FPS) show no CPU bottleneck.
Q: Should I worry about the 250 W TDP of the GPU?
A: The RTX 5070 has a TDP of 250 W and requires a 600 W suggested PSU. This is a manageable power draw for a modern build, but the 1x 16-pin power connector means you need to ensure your power supply has the appropriate cable. The CPU’s 65 W TDP is modest, keeping overall system power reasonable.
Q: What is the best resolution for this pairing?
A: The sweet spot is 2560x1440. The data shows 166 FPS at Medium and 103.8 FPS at High, which balances visual fidelity with frame rate. At 1080p, the system is CPU-bound, wasting GPU potential, while at 4K, the GPU struggles to maintain 60 FPS on anything above High.
Q: How does this combo handle the Ultra preset?
A: The Ultra preset is playable at 1080p (106.9 FPS) and 1440p (72.4 FPS), but it is not recommended for 4K, where it drops to 40.2 FPS. The performance hit from High to Ultra is significant: at 4K, it’s a 19.2 FPS reduction, and at 1440p, it’s a 31.4 FPS reduction.
Measured FPS Breakdown
The measured frame rate data provides a clear picture of performance across nine distinct configurations. At 1920x1080, the combo delivers exceptional results: Low settings produce 303.8 FPS, Medium 246.9 FPS, High 156.9 FPS, and Ultra 106.9 FPS. This shows a linear degradation as settings increase, with the gap between Low and Ultra being a substantial 196.9 FPS. The 1080p results are indicative of a CPU-limited scenario, as the RTX 5070 is capable of far more than 300 FPS in this game. Moving to 2560x1440, the numbers become more balanced: Low hits 200.4 FPS, Medium 166 FPS, High 103.8 FPS, and Ultra 72.4 FPS. The drop from 1080p to 1440p at High settings is 53.1 FPS, which is a 33.8% performance loss, suggesting the GPU is starting to become the limiting factor. At 3840x2160, the GPU is clearly the bottleneck: Low achieves 109.1 FPS, Medium 91 FPS, High 59.4 FPS, and Ultra 40.2 FPS. The 4K High result is notable because it is the only configuration that lands comfortably near the 60 FPS target for console-quality gaming. The scaling from 1440p to 4K at High settings is a 44.4 FPS drop, which is a 42.7% reduction. This disproportionate loss at 4K is a direct result of the GPU’s 192-bit memory bus and 672.0 GB/s bandwidth being insufficient for the 8.3 million pixel workload at maximum detail. The data supports a recommendation for 1440p as the primary resolution, with 1080p reserved for competitive play and 4K only viable on Medium or Low settings.
GPU Role
The NVIDIA GeForce RTX 5070 plays a dominant role in determining the overall experience in The Long Drive, particularly at higher resolutions. Its 12 GB of GDDR7 memory on a 192-bit bus provides a memory bandwidth of 672.0 GB/s. This is sufficient for 1080p and 1440p gaming, as evidenced by the strong frame rates, but the 4K Ultra result of 40.2 FPS highlights a VRAM capacity or bandwidth limitation. The GPU’s 6144 shading units and 192 texture mapping units are capable of processing the game’s geometry efficiently, but the 80 ROPs (render output units) are the likely culprit for the 4K performance drop, as pixel fill rate becomes critical at high resolutions. The boost clock of 2512 MHz is modest for a high-end card, but the Blackwell 2.0 architecture compensates with high IPC and efficient scheduling. The GPU’s 48 RT cores are not heavily utilized in this driving simulation, but the 192 tensor cores could be used for DLSS if the game supports it, though the measured data does not include upscaling results. The GPU’s passmark G3D score of 29137 places it in the 83rd percentile, and its closest rival, the RTX 3090, has an average score that is 0.6% lower. This means the 5070 is a generational leap in efficiency, delivering RTX 3090-level performance at a lower 250 W TDP. In The Long Drive, the GPU’s role is clear: it is the bottleneck at 4K and the primary driver of frame rate variance across settings. The 12 GB VRAM is adequate for High settings at 4K (59.4 FPS), but Ultra pushes it over the edge, suggesting that the game’s Ultra preset allocates more than 12 GB of texture data, causing a significant performance penalty. For optimal results, users should prioritize the High preset at 4K or leverage Medium at 1440p for high refresh rates.
Settings Recommendations
Based on the measured FPS data, the optimal settings configuration depends heavily on your display’s resolution and refresh rate. For 1920x1080 users with a 144 Hz or higher monitor, the Medium preset is the sweet spot, delivering 246.9 FPS with a good balance of visual quality. High settings at 1080p (156.9 FPS) are also viable for 144 Hz displays, but the 90 FPS drop from Medium to High suggests diminishing returns. The Ultra preset at 1080p is not recommended, as the 106.9 FPS result is below the 144 Hz threshold and the visual improvement is marginal. For 2560x1440, the Medium preset is the clear winner, providing 166 FPS, which is well above the 144 Hz refresh rate common on 1440p monitors. If you prefer higher graphical fidelity, High settings at 103.8 FPS is acceptable for 60 Hz panels but falls short of 144 Hz. The Ultra preset at 72.4 FPS is playable but not ideal for fast-paced driving sections. For 3840x2160, the High preset is the only sensible choice, yielding 59.4 FPS, which is just under the 60 Hz target. Medium settings at 91 FPS provide a smoother experience, but the visual downgrade is noticeable. The Low preset at 109.1 FPS is too spartan for a driving simulation, as it likely sacrifices draw distance and texture detail. The Ultra preset at 40.2 FPS is unplayable and should be avoided. The data indicates that the High preset is the best overall choice for 4K, while Medium offers the best balance of performance and quality for 1440p. For 1080p, Medium or High are both viable, depending on whether you prioritize frame rate or visual fidelity. The 4K High result of 59.4 FPS is the most demanding configuration that remains playable, while the 1440p Medium result of 166 FPS offers the best headroom for future driver optimizations or additional background processes.
Hardware Specifications
AMD Ryzen 5 8400F
NVIDIA GeForce RTX 5070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 8400F + NVIDIA GeForce RTX 5070 in The Long Drive
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 109.1 |
| 3840x2160 | Medium | 91.0 |
| 3840x2160 | High | 59.4 |
| 3840x2160 | Ultra | 40.2 |
| 2560x1440 | Low | 200.4 |
| 2560x1440 | Medium | 166.0 |
| 2560x1440 | High | 103.8 |
| 2560x1440 | Ultra | 72.4 |
| 1920x1080 | Low | 303.8 |
| 1920x1080 | Medium | 246.9 |
| 1920x1080 | High | 156.9 |
| 1920x1080 | Ultra | 106.9 |
The Long Drive with Ryzen 5 8400F + Other GPUs
See how The Long Drive performs with the same CPU but different graphics cards.
The Long Drive with RTX 5070 + Other CPUs
See how The Long Drive performs with the same GPU but different processors.
Other Games with Ryzen 5 8400F + RTX 5070
Explore FPS benchmarks for other games using this same hardware combination.