Steamworld Build
This combination provides smooth gameplay with an average of 101 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 29 | 43 | 58 | 76 |
| 1440p QHD | 55 | 82 | 110 | 143 |
| 1080p Full HD | 87 | 129 | 172 | 225 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 4060, In-Depth Analysis
Steamworld Build is a city builder that stresses the system differently than fast-paced shooters, and the measured results for the Intel Core Ultra 9 290K Plus paired with the NVIDIA GeForce RTX 4060 show a clear progression from CPU-bound territory at 1080p to a GPU-limited scenario at 4K. The data set provides a complete matrix of three resolutions and four quality presets, offering a precise view of how this combination scales under load.
Resolution Scaling
The frame rate drop from 1080p to 4K is the defining characteristic of this configuration. At 1920x1080 with Low settings, the system produces an average of 225 FPS, which is exceptionally high for a simulation title. Moving to 2560x1440 at the same preset drops the average to 143 FPS, a reduction of 36.4%. At 3840x2160, the Low preset yields 76 FPS, which is 46.8% lower than the 1440p result. This steep decline indicates that the GPU is the limiting factor as pixel count increases.
The scaling pattern becomes even more pronounced when examining the High preset. At 1080p High, the average is 129 FPS. At 1440p High, it falls to 82 FPS, a 36.4% drop. At 4K High, the average is just 43 FPS, a 47.6% reduction from 1440p. This near-linear decline with pixel count is classic GPU-bound behavior. The RTX 4060, with its 8 GB of GDDR6 memory on a 128-bit bus, is being pushed to its limits at 4K.
Medium settings tell the same story with more granularity, as this is the only preset with min and max FPS data. At 1080p Medium, the average is 172 FPS with a minimum of 147 and a maximum of 198. At 1440p Medium, the average drops to 110 FPS with a minimum of 93 and a maximum of 126. The 4K Medium result shows an average of 58 FPS with a minimum of 49 and a maximum of 67. The spread between min and max narrows as resolution increases, suggesting that frame pacing becomes more consistent when the GPU is saturated.
The Ultra preset is the most demanding, and its scaling is telling. At 1080p Ultra, the average is 87 FPS. At 1440p Ultra, it drops to 55 FPS, a 36.8% reduction. At 4K Ultra, the average plummets to 29 FPS, which is 47.3% lower than the 1440p result. This is the only preset where 4K dips below the 30 FPS threshold, making it effectively unplayable for smooth gameplay. The data shows that the limiting component shifts from the CPU at lower resolutions to the GPU at higher resolutions, with the crossover point occurring somewhere between 1440p and 4K depending on the preset.
Settings Recommendations
The measured rows provide a clear hierarchy of playable settings. At 4K, the only viable options are Low at 76 FPS average and Medium at 58 FPS average. The High preset at 43 FPS is borderline, while Ultra at 29 FPS is below the standard playability threshold. For a city builder where camera panning and zooming are frequent, the Medium preset at 4K offers the best balance, providing a 58 FPS average with a minimum of 49 FPS, which keeps the experience fluid during heavy simulation moments.
At 1440p, the choice becomes more flexible. The Medium preset delivers 110 FPS average with a minimum of 93 FPS, which is excellent for this genre. The High preset at 82 FPS average is also very playable and likely offers noticeable visual improvements over Medium. The Ultra preset at 55 FPS average is acceptable, but the jump from High to Ultra costs 27 FPS, which is a 32.9% reduction. Given that city builders rely on readability of the map, the High preset at 1440p provides a strong experience without the performance penalty of Ultra.
At 1080p, the system has headroom to spare. The High preset at 129 FPS average is smooth, and the Ultra preset at 87 FPS average still clears the 60 FPS threshold comfortably. The Low preset at 225 FPS is overkill for this genre, and the Medium preset at 172 FPS is unnecessary headroom. The data suggests that 1080p Ultra is the best experience at this resolution, as it provides the highest visual quality while maintaining an average well above 60 FPS. The minimum FPS data is only available for Medium, but the 147 FPS minimum at 1080p Medium indicates that the system does not suffer from severe frame drops at this resolution.
GPU Role
The NVIDIA GeForce RTX 4060 is the primary constraint at higher resolutions. Its 8 GB of GDDR6 memory on a 128-bit bus delivers a bandwidth of 272.0 GB/s, which is modest for 4K gaming. The measured data confirms this limitation: at 4K Ultra, the average FPS is 29, while at 4K Low it is 76. This 2.6x difference between Ultra and Low at 4K suggests that memory bandwidth and fill rate are the bottlenecks, not the CPU.
The GPU's clock speeds are relevant to this analysis. The base clock is 1830 MHz with a boost clock of 2460 MHz, and the memory runs at 2125 MHz with 17 Gbps effective speed. These clocks are relatively high for a 115 W TDP part, but the 128-bit memory interface limits the effective bandwidth. The RTX 4060's transistor count of 18,900 million on a 159 mm² die (TSMC 5 nm) shows a dense design, but the FP32 performance of 15.11 TFLOPS is the key metric for rasterization-heavy city builder workloads.
The GPU's benchmark results provide context for its position. It scores 19,545 in Passmark G3D, which places it at the 61st percentile among all GPUs. Its nearest rivals in the benchmark database are the AMD Radeon HD 7790 (with a delta of -0.2%), the AMD Radeon 780M (delta of 0.3%), and the AMD Radeon Pro 560 (delta of 0.5%). These are older or integrated parts, which is surprising given the RTX 4060's modern architecture, but the average benchmark score of 17,639 reflects its mid-range positioning.
The VRAM capacity is adequate for 1080p and 1440p, but at 4K, the 8 GB buffer can become a constraint if textures are set to Ultra. The data does not show VRAM usage, but the observed FPS drop from 76 at 4K Low to 43 at 4K High suggests that texture and shading complexity are heavily taxing the memory subsystem. The GPU's direct competitors in the benchmark database are not the same as its in-game rivals, which indicates that Steamworld Build's rendering requirements are unique.
FAQ
Q: What is the best resolution for this combo in Steamworld Build?
A: The data shows that 2560x1440 with Medium settings provides an average of 110 FPS with a minimum of 93 FPS, offering the best balance of visual quality and performance. At 4K, the Medium preset drops to 58 FPS average, which is still playable but less fluid.
Q: Is the RTX 4060 capable of running this game at 4K?
A: Yes, but only on lower presets. The measured results show 76 FPS average at 4K Low and 58 FPS average at 4K Medium. The High preset at 43 FPS is marginal, and the Ultra preset at 29 FPS is not recommended.
Q: How does the CPU's single-thread performance affect this game?
A: The Core Ultra 9 290K Plus scores 7,303 in Cinebench R23 single-core and 4,823 in Passmark single-thread. These high scores ensure that the CPU does not bottleneck the GPU at lower resolutions, as evidenced by the 225 FPS result at 1080p Low.
Q: Which settings preset should be avoided at 1440p?
A: The Ultra preset at 1440p yields 55 FPS average, which is a 32.9% drop from the High preset at 82 FPS. Given the marginal visual improvement, the data suggests that High is the better choice for maintaining high frame rates.
Q: Does the 8 GB VRAM cause issues at any resolution?
A: The data does not include VRAM utilization, but the steep FPS drop from 4K Low (76 FPS) to 4K Ultra (29 FPS) indicates that the memory bandwidth and capacity are stressed at 4K. At 1080p and 1440p, the results are consistently strong, suggesting adequate VRAM for those resolutions.
Q: How does this combo rank compared to other tested configurations?
A: The combo ranks 1,530 out of 2,924 tested combinations, placing it in the 47.7th percentile. This suggests that while it performs well, there are many other combos that achieve higher frame rates in this specific game.
How This Combo Ranks
The combination of the Intel Core Ultra 9 290K Plus and the NVIDIA GeForce RTX 4060 ranks 1,530 out of 2,924 tested combos in Steamworld Build. This places it slightly below the midpoint of all tested systems, which is a significant finding given the high-end CPU. The CPU alone is in the 96th percentile among all CPUs, with an average benchmark score of 84,003, but the GPU is only in the 61st percentile with an average score of 17,639. This mismatch explains the overall ranking.
The CPU's nearest rivals in the benchmark database are the Intel Core Ultra 9 285K (delta of 0.2%), the AMD EPYC 4584PX (delta of 1.1%), and the AMD EPYC 9135 (delta of 1.2%). These are all high-end desktop or server parts, showing that the CPU is performing at the top of its class. The GPU's nearest rivals are the AMD Radeon HD 7790 (delta of -0.2%), the AMD Radeon 780M (delta of 0.3%), and the AMD Radeon Pro 560 (delta of 0.5%). These are much older or integrated parts, indicating that the GPU is not competitive with modern discrete options in the same price tier.
The ranking of 1,530 out of 2,924 means that 1,393 combos perform worse and 1,530 perform better. This suggests that many systems with lower-end CPUs but stronger GPUs outperform this configuration in Steamworld Build. The game appears to be more GPU-bound than CPU-bound, which explains why the top-tier CPU does not boost the combo's rank. The data indicates that users with this combination should prioritize GPU upgrades over CPU upgrades for better performance in this specific title.
CPU Role
The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor based on the Arrow Lake Refresh architecture, manufactured on TSMC's 3 nm process. Its base clock is 3.70 GHz with a boost clock of 5.80 GHz, and it supports DDR5 memory in a dual-channel configuration with a bandwidth of 115.2 GB/s. The CPU's benchmark results are exceptional: it scores 51,731 in Cinebench R23 multi-core and 7,303 in single-core. These scores place it in the 96th percentile among all CPUs.
In Steamworld Build, the CPU's role is to process simulation logic, pathfinding, and agent behavior. The measured FPS at 1080p Low (225 FPS average) demonstrates that the CPU is not a bottleneck at this resolution. Even at 1080p Ultra (87 FPS average), the CPU provides enough headroom for the GPU to be the limiting factor. The L3 cache is 36 MB shared, which is ample for the game's data structures, and the 24 cores can handle the multi-threaded simulation workload effectively.
The CPU's Passmark multi-thread score of 60,860 and data compression score of 698,346 indicate strong parallel processing capabilities. However, the game's performance at higher resolutions shows that these capabilities are underutilized when the GPU becomes the constraint. At 4K Ultra, the CPU is likely waiting for the GPU to complete rendering tasks, as evidenced by the 29 FPS average. The CPU's single-thread performance, measured at 4,823 in Passmark, is sufficient for the game's main thread, which handles input, camera, and UI logic.
The CPU's nearest rivals in the benchmark database are all within 1.3% of its average score, showing that it is at the top of its class. The AMD EPYC 7F72 scores 1.3% higher, while the Intel Core Ultra 9 285K scores 0.2% lower. This tight grouping suggests that the CPU is performing at its expected level. In the context of Steamworld Build, the CPU provides more than enough performance for the game's simulation requirements, making the GPU the primary target for upgrades.
Measured FPS Breakdown
The complete measured FPS data for this combination is as follows:
At 1920x1080, the Low preset delivers an average of 225 FPS, the Medium preset delivers 172 FPS (with a minimum of 147 and a maximum of 198), the High preset delivers 129 FPS, and the Ultra preset delivers 87 FPS. The scaling from Low to Ultra at 1080p shows a 61.3% reduction in average FPS, which is substantial but leaves all presets above the 60 FPS threshold.
At 2560x1440, the Low preset delivers 143 FPS, the Medium preset delivers 110 FPS (with a minimum of 93 and a maximum of 126), the High preset delivers 82 FPS, and the Ultra preset delivers 55 FPS. The scaling from Low to Ultra at 1440p shows a 61.5% reduction, nearly identical to the 1080p scaling. The Ultra preset at 55 FPS is the only one that falls below 60 FPS at this resolution.
At 3840x2160, the Low preset delivers 76 FPS, the Medium preset delivers 58 FPS (with a minimum of 49 and a maximum of 67), the High preset delivers 43 FPS, and the Ultra preset delivers 29 FPS. The scaling from Low to Ultra at 4K shows a 61.8% reduction, consistent with the other resolutions. However, only the Low preset maintains an average above 60 FPS, and the Ultra preset falls below 30 FPS.
The Medium preset is the only one with complete min/max data across all resolutions. At 1080p, the minimum is 147 FPS (85.5% of the average), at 1440p the minimum is 93 FPS (84.5% of the average), and at 4K the minimum is 49 FPS (84.5% of the average). This consistency suggests that frame pacing is stable relative to the average, with no sudden drops or stutters. The max values show similar consistency: 198 FPS at 1080p, 126 FPS at 1440p, and 67 FPS at 4K, each representing approximately 115% of the average.
The overall trend across all presets and resolutions shows a predictable pattern: each resolution increase from 1080p to 1440p costs approximately 36% of the frame rate, and each increase from 1440p to 4K costs approximately 47% of the frame rate. This nonlinear scaling indicates that the GPU's memory bandwidth and fill rate are the primary constraints at 4K, while the CPU and GPU are more balanced at 1080p. The data provides a clear picture for users: this combo excels at 1080p and 1440p with any preset, but requires careful preset selection at 4K to maintain playable frame rates.
Hardware Specifications
Intel Core Ultra 9 290K Plus
NVIDIA GeForce RTX 4060
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 4060 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 76.0 |
| 3840x2160 | Medium | 58.0 |
| 3840x2160 | High | 43.0 |
| 3840x2160 | Ultra | 29.0 |
| 2560x1440 | Low | 143.0 |
| 2560x1440 | Medium | 110.0 |
| 2560x1440 | High | 82.0 |
| 2560x1440 | Ultra | 55.0 |
| 1920x1080 | Low | 225.0 |
| 1920x1080 | Medium | 172.0 |
| 1920x1080 | High | 129.0 |
| 1920x1080 | Ultra | 87.0 |
Steamworld Build with iUltra 9 290K Plus + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 4060 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with iUltra 9 290K Plus + RTX 4060
Explore FPS benchmarks for other games using this same hardware combination.