Steamworld Build

Steamworld Build

AVERAGE FPS
133
excellent

This combination delivers exceptional performance with an average of 133 FPS, perfect for high refresh rate gaming and competitive play.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 39 57 77 100
1440p QHD 73 109 145 189
1080p Full HD 115 171 228 298

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 100
3840x2160 Medium 77
3840x2160 High 57
3840x2160 Ultra 39
2560x1440 Low 189
2560x1440 Medium 145
2560x1440 High 109
2560x1440 Ultra 73
1920x1080 Low 298
1920x1080 Medium 228
1920x1080 High 171
1920x1080 Ultra 115

Steamworld Build with Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 3080, In-Depth Analysis

Steamworld Build is a city builder that leans more on simulation logic than on raw graphical spectacle, but the data for the Intel Core Ultra 9 290K Plus paired with the NVIDIA GeForce RTX 3080 shows a combo that scales predictably across resolutions and settings. The measured frame rates are consistent with a system where the GPU becomes the primary bottleneck at higher resolutions, while the CPU’s strong multi-threaded performance ensures the simulation stays fluid even at lower settings where frame rates climb well past typical display refresh rates.

How This Combo Ranks

The combination of the Intel Core Ultra 9 290K Plus and the NVIDIA GeForce RTX 3080 lands at rank 760 out of 2924 tested combos for Steamworld Build. That places it in the upper half of all tested configurations, specifically in the 74th percentile when considering all possible pairings. The rank reflects a balanced setup where neither component is severely mismatched for the game’s demands, though the RTX 3080’s position in the broader GPU landscape suggests it is the more limiting factor.

Looking at the CPU side, the Intel Core Ultra 9 290K Plus sits in the 96th percentile among all tested CPUs, with an average benchmark score of 84003. Its nearest rivals in the CPU benchmark database are the Intel Core Ultra 9 285K, which scores 83807 and is 0.2% slower, and the AMD EPYC 4584PX, which scores 83090 and is 1.1% slower. The AMD EPYC 9135 scores 82980, 1.2% slower, while the AMD EPYC 7F72 scores 85072, which is 1.3% faster than the 290K Plus. These are very tight margins, indicating that the 290K Plus is at the top of the heap for synthetic CPU workloads, which matters for a city builder where the simulation tick rate can depend on raw compute.

The GPU, however, tells a different story. The NVIDIA GeForce RTX 3080 has an average benchmark score of 23172 and sits in the 68th percentile among all GPUs. Its nearest rivals are surprising: the NVIDIA P106-100 scores 23249, 0.3% higher, the AMD Radeon Pro Vega 16 scores 23250, 0.3% higher, the AMD Radeon RX 6600M scores 23273, 0.4% higher, and the AMD Radeon R9 M290X scores 23276, 0.4% higher. These deltaPct values are all within a fraction of a percent, which is unusual for a GPU of this class, but the data shows the RTX 3080’s synthetic score is essentially tied with those older or lower-tier parts. That suggests that for Steamworld Build, the GPU’s real-world performance in the measured FPS is more important than its raw benchmark standing, since the game is not particularly demanding on the graphics card.

The combo rank of 760 out of 2924 means there are 759 other configurations that perform better in this game, but also over 2100 that perform worse. That is a strong showing, especially considering the CPU’s elite percentile rank. The data indicates that the bottleneck in this combo is the GPU, as the CPU is clearly capable of feeding it more frames than the RTX 3080 can deliver at higher settings. This is evident from the frame rate scaling across resolutions, which shows a consistent drop that tracks with the GPU’s workload rather than any CPU limitation.

Settings Recommendations

The measured FPS data for this combo covers four settings presets—Low, Medium, High, and Ultra—across three resolutions. For the best experience, the Medium preset emerges as the most balanced choice, particularly at 1440p and 4K. At 3840x2160, Medium delivers an average of 77 FPS with a minimum of 65 and a maximum of 88. That is comfortably above the 60 FPS threshold for smooth play, and the minimum frame rate of 65 indicates that even during heavy simulation moments, the system does not drop below playable levels. High at 4K drops to 57 FPS average, which is still playable but leaves less headroom for stutters, while Ultra falls to 39 FPS average, which is noticeably below the smoothness standard.

At 2560x1440, Medium again provides the best balance: 145 FPS average with a minimum of 123 and a maximum of 167. That is well above any display refresh rate, and the tight minimum-to-maximum spread shows consistent frame pacing. High at 1440p reaches 109 FPS average, which is also excellent, but the extra 36 FPS from Medium does not come at a visible visual cost for a city builder where textures and shadows are less critical than the simulation grid. Low at 1440p hits 189 FPS, but that setting sacrifices visual fidelity for frame rates that exceed what most monitors can display, making it a poor trade-off.

For 1920x1080, the situation is different. Medium delivers 228 FPS average with a minimum of 194 and a maximum of 262, which is far beyond any display’s refresh rate. High at 1080p still reaches 171 FPS, and Ultra manages 115 FPS. At this resolution, the CPU’s strength is fully exposed, as even Ultra maintains a playable frame rate. However, the recommended preset for the best overall experience across all resolutions is Medium, because it provides the most consistent frame times at 1440p and 4K, while at 1080p it is overkill but still stable. Low settings are only advisable for players targeting extreme refresh rates, which is unnecessary for this genre.

The data shows that Ultra is not a viable preset for this combo at 4K, with 39 FPS average, and even at 1440p it drops to 73 FPS, which is playable but not ideal. High is a good alternative at 1440p with 109 FPS, but Medium offers a higher average and better minimums at both 1440p and 4K. Thus, the recommendation is to use Medium for a smooth, stutter-free experience, and only drop to High if visual fidelity is a priority and the user is willing to accept lower frame rates at 4K.

Resolution Scaling

The frame rate data reveals a clear scaling pattern as resolution increases from 1920x1080 to 3840x2160. At Medium settings, the average FPS drops from 228 at 1080p to 145 at 1440p, a 36% reduction, and then to 77 at 4K, a 47% reduction from 1440p and a 66% reduction from 1080p. This is a classic GPU-bound scaling curve, where the pixel count quadruples from 1080p to 4K, but the frame rate does not drop by the same factor because the RTX 3080’s memory bandwidth and compute units are only partially saturated at lower resolutions.

Looking at High settings, the pattern is similar: 171 FPS at 1080p, 109 FPS at 1440p, and 57 FPS at 4K. That is a 36% drop from 1080p to 1440p, and a 48% drop from 1440p to 4K. The consistency of these percentage drops across settings suggests that the limiting component is the GPU, not the CPU. If the CPU were the bottleneck, we would expect the frame rates at 1080p to plateau, but they continue to rise as resolution decreases, reaching 298 FPS at Low settings on 1080p. That is a clear sign that the CPU can push far more frames than the GPU can render at higher resolutions.

The data also shows that the minimum frame rates, where available, scale similarly. At Medium settings, the minimum FPS drops from 194 at 1080p to 123 at 1440p and then to 65 at 4K. The minimum-to-average ratio remains roughly consistent, indicating that the frame pacing is stable across resolutions. The CPU’s role in this scaling is minimal because Steamworld Build’s simulation load is largely resolution-independent; the same number of entities and calculations occur regardless of pixel count. The GPU, on the other hand, has to process more pixels, and the RTX 3080’s 10 GB of GDDR6X memory and 320-bit bus width become more stressed at 4K, though the game’s relatively simple visuals mean it does not run out of memory.

The limiting component at 4K is clearly the GPU. At 1080p, the CPU could potentially handle even higher frame rates, but the RTX 3080 caps the output. The fact that Low settings at 1080p reach 298 FPS while Ultra at 4K falls to 39 FPS illustrates the full range of this combo’s behavior. For players who want to use this system at 4K, the data suggests that Medium is the highest preset that maintains a playable frame rate, while 1440p offers a much larger margin of error.

Measured FPS Breakdown

At 1920x1080, the measured frame rates are exceptionally high across all presets. Low settings produce an average of 298 FPS, which is the highest recorded for this combo in any configuration. Medium settings yield 228 FPS average, with a minimum of 194 and a maximum of 262. High settings drop to 171 FPS average, while Ultra settings still manage 115 FPS average. These numbers indicate that at 1080p, the RTX 3080 is not the bottleneck; the CPU’s 24 cores and 24 threads are able to feed the GPU more than enough frames, and the game’s simulation logic runs smoothly even at Ultra.

At 2560x1440, the frame rates remain high but begin to show the GPU’s limits. Low settings average 189 FPS, which is still excellent. Medium settings average 145 FPS, with a minimum of 123 and a maximum of 167, providing a very smooth experience. High settings average 109 FPS, which is above the 60 FPS standard but leaves less headroom for demanding scenes. Ultra settings average 73 FPS, which is playable but noticeably lower than the other presets. The spread between Low and Ultra at 1440p is 116 FPS, showing that this combo can scale well with settings, but the GPU’s workload is becoming more significant.

At 3840x2160, the frame rates drop dramatically. Low settings average 100 FPS, which is still playable. Medium settings average 77 FPS, with a minimum of 65 and a maximum of 88, making it the only 4K preset with a minimum above 60 FPS. High settings average 57 FPS, which is below the 60 FPS threshold but close enough that most players would not notice significant stutter in a city builder. Ultra settings average 39 FPS, which is not recommended for smooth play. The difference between Low and Ultra at 4K is 61 FPS, and the data shows that the GPU’s rendering load at 4K is the primary factor, as the CPU’s performance is consistent across resolutions.

The Medium preset at 4K, with its 65 FPS minimum, is the standout configuration for high-resolution play. The minimum frame rate is critical for a city builder because the simulation can cause periodic dips when many entities are active, and a 65 FPS floor means the game will not stutter. In contrast, the High preset at 4K has no recorded minimum FPS in the data, but its 57 FPS average suggests that dips below 50 FPS are likely. The Ultra preset at 4K is effectively unplayable for most users, as 39 FPS average will feel sluggish.

GPU Role

The NVIDIA GeForce RTX 3080 is built on the Ampere architecture with a GA102 chip, manufactured on Samsung’s 8 nm process. It has 28,300 million transistors on a 628 mm² die, with a transistor density of 45.1M per mm². The GPU features 8704 shading units, 272 texture mapping units, 96 ROPs, 68 ray tracing cores, and 272 tensor cores. Its pixel rate is 164.2 GPixel/s, and its texture rate is 465.1 GTexel/s, with FP32 performance of 29.77 TFLOPS. The memory configuration is 10 GB of GDDR6X on a 320-bit bus, providing a bandwidth of 760.3 GB/s, with memory clocks running at 1188 MHz and 19 Gbps effective.

These specifications are more than adequate for Steamworld Build, which is not a graphically intensive title. The game’s visual style is likely stylized and low-poly, given the genre and the fact that the RTX 3080 can achieve 298 FPS at 1080p Low. The GPU’s role in this combo is to handle the rendering of the city, including buildings, terrain, and any effects, while the CPU handles the simulation. The data shows that the RTX 3080’s 10 GB of VRAM is sufficient, as there is no indication of memory-related stutters or drops in the measured FPS, even at 4K Ultra where the average is 39 FPS.

The GPU’s percentile ranking of 68th among all GPUs is lower than the CPU’s 96th percentile, which reinforces that the GPU is the weaker link in this pairing. However, for this specific game, the RTX 3080’s performance is still strong enough to provide a good experience at 1440p and even 4K with the right settings. The launch MSRP of 699 USD for the RTX 3080 reflects its position as a high-end card from the GeForce 30-series, but its end-of-life production status and the fact that its benchmark rivals include the NVIDIA P106-100 and AMD Radeon RX 6600M, which are not in the same performance class, suggests that synthetic benchmarks do not fully capture its gaming strengths.

In Steamworld Build, the GPU’s clocks of 1440 MHz base and 1710 MHz boost are not pushed to their limits at lower resolutions, but at 4K, the card’s compute units are more fully utilized. The 68 RT cores and 272 tensor cores are not heavily used in this game, as it likely does not employ ray tracing or DLSS, but they are available for other titles. The 320-bit memory bus and 760.3 GB/s bandwidth are crucial for 4K rendering, as the higher pixel count requires more memory throughput, and the data shows that this bandwidth is sufficient to maintain playable frame rates at Medium settings.

CPU Role

The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor based on the Arrow Lake Refresh codename, part of the Core Ultra Series 2. It has a base clock of 3.70 GHz and a boost clock of 5.80 GHz, with a TDP of 125 W. The CPU is manufactured on TSMC’s 3 nm process, with 17,800 million transistors on a 243 mm² die. Its cache hierarchy includes 192 KB of L1 per core, 3 MB of L2 per core, and a shared 36 MB of L3 cache. It supports DDR5 memory with a dual-channel bus and a bandwidth of 115.2 GB/s, and it has 20 PCIe Gen 5 lanes from the CPU. The integrated graphics are Arc Xe-LPG Graphics with 64 execution units, and the CPU supports ECC memory.

The CPU’s benchmark scores are exceptional. In Cinebench R23, it scores 51731 in multi-core and 7303 in single-core. In Cinebench R20, it scores 21727 multi-core and 3067 single-core, and in Cinebench R15, it scores 5214 multi-core and 736 single-core. PassMark results show a multi-thread score of 60860, a single-thread score of 4823, and data compression at 698346. These numbers place it in the 96th percentile of all CPUs, with an average benchmark score of 84003.

For Steamworld Build, the CPU’s role is to run the simulation logic, which includes the city’s economy, resource flow, and the behavior of workers and buildings. This is a heavily multi-threaded workload, and the 24 cores and 24 threads are well-suited to it. The high boost clock of 5.80 GHz ensures that single-threaded tasks, such as the main game loop, are also handled quickly. The data supports the CPU’s strength: at 1080p Low, the combo reaches 298 FPS, which indicates that the CPU is not the bottleneck even at very high frame rates. The CPU’s nearest rival, the Intel Core Ultra 9 285K, is only 0.2% slower, and the AMD EPYC 7F72 is 1.3% faster, but those differences are negligible for gaming.

The CPU’s 36 MB of L3 cache is beneficial for a city builder where the simulation state is large and frequently accessed. The 3 nm process and 125 W TDP mean it runs efficiently, though that is not directly measured in the FPS data. The memory bandwidth of 115.2 GB/s is more than sufficient for the game’s data needs, and the lack of any observed CPU-related frame drops suggests that the 290K Plus is never the limiting factor in this combo. Even at 4K Ultra, where the GPU is clearly the bottleneck, the CPU is still able to maintain the simulation without causing stutters, as evidenced by the 39 FPS average being a result of GPU rendering limits rather than CPU calculation limits.

Hardware Specifications

Intel Core Ultra 9 290K Plus

Cores / Threads 24 / 24
Base Clock 3700 MHz
Boost Clock 5800 MHz
TDP 125W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 3080

VRAM 10 GB GDDR6X
Base Clock —
Boost Clock 1710 MHz MHz
TDP 320 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 9 290K Plus + NVIDIA GeForce RTX 3080 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 100.0
3840x2160 Medium 77.0
3840x2160 High 57.0
3840x2160 Ultra 39.0
2560x1440 Low 189.0
2560x1440 Medium 145.0
2560x1440 High 109.0
2560x1440 Ultra 73.0
1920x1080 Low 298.0
1920x1080 Medium 228.0
1920x1080 High 171.0
1920x1080 Ultra 115.0

Steamworld Build with iUltra 9 290K Plus + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 3080 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with iUltra 9 290K Plus + RTX 3080

Explore FPS benchmarks for other games using this same hardware combination.