Steamworld Build
This combination provides smooth gameplay with an average of 100 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 44 | 57 | 75 |
| 1440p QHD | 53 | 80 | 108 | 144 |
| 1080p Full HD | 87 | 131 | 172 | 224 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 4060, In-Depth Analysis
# Steamworld Build with AMD Ryzen 9 5950X + NVIDIA GeForce RTX 4060
The AMD Ryzen 9 5950X paired with the NVIDIA GeForce RTX 4060 delivers a surprisingly consistent experience in Steamworld Build, a city builder from late 2023. The measured data shows this combo ranking 983rd out of 1,730 tested combinations, placing it in the lower-middle tier of the database. That ranking, however, masks a more nuanced story: the 16-core Zen 3 processor clearly has ample headroom, while the 8 GB Ada Lovelace GPU becomes the primary constraint as resolution climbs. The performance spread across settings and resolutions reveals a system that can hit buttery-smooth frame rates at 1080p but struggles to maintain playable numbers at 4K with maximum quality.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and telling. At Low settings, the average frame rate falls from 223.9 FPS at 1920x1080 to 75.3 FPS at 3840x2160 — a reduction of roughly 66%. The same pattern holds at Medium settings, where 171.6 FPS at 1080p drops to 57.1 FPS at 4K, a 67% decline. High settings show a slightly smaller relative drop: 130.6 FPS at 1080p falls to 44.1 FPS at 4K, about 66% lower. Ultra settings exhibit the most severe absolute decline, from 86.9 FPS at 1080p down to 31 FPS at 4K, a 64% reduction.
What does this scaling pattern imply about the limiting component? The fact that 4K performance at High (44.1 FPS) and Ultra (31 FPS) falls below the 60 FPS threshold while 1440p at the same settings remains comfortably above it (80.4 FPS and 53.3 FPS respectively) points directly at the GPU. The RTX 4060's 128-bit memory bus and 272.0 GB/s bandwidth simply cannot feed the pixel throughput demanded by 4K in a simulation-heavy title. The CPU, with 16 cores and 32 threads, is unlikely to be the bottleneck here — the resolution-dependent scaling is a classic GPU-bound signature. At 1080p, the system clearly has headroom; at 4K, the GPU's 8 GB frame buffer and bandwidth become the wall.
How This Combo Ranks
With a combo rank of 983 out of 1,730 tested combinations, this pairing sits in the 57th percentile of all tested combos in Steamworld Build. That ranking is respectable but not exceptional, and it makes sense given the hardware profile. The RTX 4060 holds a 66th percentile ranking among all GPUs in the database, while the Ryzen 9 5950X sits at the 93rd percentile among all CPUs. The gap between those two percentile figures suggests the GPU is the weaker link in this pairing, dragging the overall combo ranking below what the CPU alone would achieve.
The CPU's average benchmark score of 49,062 places it nearly level with the Intel Core i5-14600K, which scores 49,166 (a delta of -0.2%), and the Intel Core i5-14600KF at 49,367 (-0.6%). It trails the AMD EPYC 4345P (49,595, -1.1%) and leads the Intel Xeon Gold 5318H (48,698, +0.7%). These are all close margins, indicating the 5950X delivers compute performance in line with modern mid-range and high-end parts, even though it launched in late 2020. For the GPU, the RTX 4060's average benchmark score of 23,181 is nearly identical to the AMD Radeon RX 6600M (23,321, -0.6%) and the NVIDIA GeForce GTX 780 Ti (23,338, -0.7%), while edging out the Intel Arc B580 (23,021, +0.7%) and the AMD Radeon 760M (22,999, +0.8%). This places the 4060 in a tight cluster of mid-range performers.
GPU Role
The RTX 4060's specifications explain much of its behavior in Steamworld Build. It features 8 GB of GDDR6 memory on a 128-bit bus, yielding 272.0 GB/s of bandwidth. The chip, AD107 on TSMC's 5 nm process, contains 18,900 million transistors across a 159 mm² die. Base clock is 1830 MHz with a boost of 2460 MHz, and memory runs at 2125 MHz (17 Gbps effective). The GPU has 3,072 shading units, 96 TMUs, and 48 ROPs, with 24 RT cores and 96 tensor cores.
The 8 GB VRAM capacity is the most likely culprit for the 4K Ultra result of 31 FPS. City builders tend to accumulate large amounts of geometry and texture data as the map fills with structures, and 8 GB can become a hard ceiling at 4K with max settings. The measured data supports this: moving from High (44.1 FPS) to Ultra (31 FPS) at 4K is a 30% drop, far larger than the corresponding drop at 1440p (80.4 to 53.3 FPS, a 34% decline) or 1080p (130.6 to 86.9 FPS, a 33% decline). The fact that the percentage drop is relatively consistent across resolutions suggests that Ultra settings impose a uniform additional load, but the absolute numbers at 4K fall below playable thresholds.
The GPU's 66th percentile ranking among all GPUs is modest, and its average benchmark score of 23,181 places it near the GTX 780 Ti from a decade earlier — evidence of how much performance per dollar has shifted, though the feature set (DirectX 12 Ultimate, 12_2) is far more modern.
FAQ
Q: What is the best resolution for this combo in Steamworld Build?
A: The data shows 1920x1080 as the sweet spot, where all settings from Low (223.9 FPS) to Ultra (86.9 FPS) remain above 60 FPS. At 2560x1440, Ultra drops to 53.3 FPS, and at 4K, High falls to 44.1 FPS.
Q: Why does 4K Ultra performance fall to 31 FPS?
A: The RTX 4060's 8 GB VRAM and 272.0 GB/s bandwidth are insufficient for 4K with maximum settings in a simulation-heavy genre. The GPU's 128-bit bus is a limiting factor for pixel throughput at 3840x2160.
Q: How does this combo compare to other tested systems?
A: It ranks 983rd out of 1,730 combos. The CPU outperforms most, sitting at the 93rd percentile, while the GPU is at the 66th percentile, indicating the GPU drags the overall ranking down.
Q: Is the Ryzen 9 5950X a bottleneck at 1080p?
A: No. At 1080p Low, the system hits 223.9 FPS, which is far beyond what the GPU can sustain at higher settings. The CPU's 16 cores and 32 threads are more than adequate for Steamworld Build's simulation logic.
Q: What settings should I avoid at 1440p?
A: Ultra settings drop to 53.3 FPS at 2560x1440, below the 60 FPS threshold. High settings at 80.4 FPS are the recommended ceiling for smooth gameplay at this resolution.
Q: Does the GPU's 8 GB VRAM cause issues at 1080p?
A: No. At 1080p, even Ultra settings maintain 86.9 FPS, indicating the 8 GB frame buffer is sufficient at this resolution for Steamworld Build.
CPU Role
The AMD Ryzen 9 5950X is a 16-core, 32-thread processor based on Zen 3 architecture (codename Vermeer), built on TSMC's 7 nm process with 8,300 million transistors across a dual-die design of 2x 74 mm². Base clock is 3.40 GHz with a boost up to 4.90 GHz, and it carries 64 MB of L3 cache plus 512 KB L2 per core. The CPU supports DDR4 memory with dual-channel bandwidth of 51.2 GB/s and uses the AM4 socket with PCIe Gen 4 (20 lanes). Its TDP is 105 W.
Benchmark data shows the 5950X is a heavyweight for multi-threaded workloads: Cinebench R23 multi-core scores 38,607, while single-core reaches 5,450. Geekbench multi-core is 12,084, and single-core is 2,211. PassMark multi-thread is 45,424, with single-thread at 3,470. These numbers place it at the 93rd percentile of all CPUs, with an average benchmark score of 49,062.
In Steamworld Build, the CPU's influence is most visible at lower resolutions where the GPU is less stressed. At 1080p Low, the system reaches 223.9 FPS; at 1440p Low it hits 143.9 FPS; at 4K Low it manages 75.3 FPS. The scaling from 1080p to 1440p at Low settings shows a 36% drop, which is larger than the pure pixel-count increase would suggest, hinting that CPU simulation work becomes relatively more important at lower GPU loads. However, the fact that 4K Ultra still delivers 31 FPS — a playable-if-not-smooth number — indicates the CPU is never the primary limiter in this title. The 5950X's nearest rivals in average score include the Intel Core i5-14600K (-0.2%) and the Intel Core i5-14600KF (-0.6%), both of which are newer and far cheaper, but the 5950X's 32 threads provide headroom for heavily simulated city-builder populations.
Settings Recommendations
The measured data offers clear guidance for each resolution. At 1920x1080, Ultra settings deliver 86.9 FPS, which is well above the 60 FPS threshold and provides the best visual experience without sacrificing smoothness. High settings at 130.6 FPS are also excellent if you prefer higher frame rates for camera panning. At 2560x1440, High settings at 80.4 FPS are the recommended choice — this stays comfortably above 60 FPS while offering strong visual quality. Medium at 107.7 FPS is an option for those wanting extra headroom, but Ultra at 53.3 FPS risks dipping below 60 FPS during busy on-screen moments. At 3840x2160, the situation is more constrained: Medium settings at 57.1 FPS are just below the 60 FPS target, while High at 44.1 FPS and Ultra at 31 FPS are best avoided for smooth play. Low at 75.3 FPS is the only 4K option that clears 60 FPS, but it sacrifices visual fidelity significantly. For the best balance of quality and performance on a 4K display, Medium is the pragmatic ceiling.
Measured FPS Breakdown
The complete measured data set is as follows:
1920x1080:
- Low: 223.9 FPS average
- Medium: 171.6 FPS average
- High: 130.6 FPS average
- Ultra: 86.9 FPS average
2560x1440:
- Low: 143.9 FPS average
- Medium: 107.7 FPS average
- High: 80.4 FPS average
- Ultra: 53.3 FPS average
3840x2160:
- Low: 75.3 FPS average
- Medium: 57.1 FPS average
- High: 44.1 FPS average
- Ultra: 31 FPS average
The pattern is consistent: each settings tier costs roughly 30-35% performance relative to the tier below, and each resolution step (1080p to 1440p, 1440p to 4K) also exacts a similar toll. The Ultra preset at 4K is the only configuration that falls below 35 FPS, making it the sole unplayable option in this dataset. The 1080p Low result of 223.9 FPS indicates the system can push very high frame rates when the GPU is not burdened, but the 4K Ultra result of 31 FPS shows the hard limits of this combination. For users with high-refresh 1080p monitors, the RTX 4060 and 5950X pair delivers exceptional performance; for 4K enthusiasts, Medium settings are the realistic maximum.
Hardware Specifications
AMD Ryzen 9 5950X
NVIDIA GeForce RTX 4060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 9 5950X + NVIDIA GeForce RTX 4060 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 75.3 |
| 3840x2160 | Medium | 57.1 |
| 3840x2160 | High | 44.1 |
| 3840x2160 | Ultra | 31.0 |
| 2560x1440 | Low | 143.9 |
| 2560x1440 | Medium | 107.7 |
| 2560x1440 | High | 80.4 |
| 2560x1440 | Ultra | 53.3 |
| 1920x1080 | Low | 223.9 |
| 1920x1080 | Medium | 171.6 |
| 1920x1080 | High | 130.6 |
| 1920x1080 | Ultra | 86.9 |
Steamworld Build with Ryzen 9 5950X + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 4060 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 9 5950X + RTX 4060
Explore FPS benchmarks for other games using this same hardware combination.