Steamworld Build
This combination delivers exceptional performance with an average of 177 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 58 | 87 | 116 | 151 |
| 1440p QHD | 111 | 164 | 219 | 251 |
| 1080p Full HD | 174 | 238 | 265 | 292 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5090, In-Depth Analysis
Settings Recommendations
For Steamworld Build, the measured data shows a clear pattern: Medium settings deliver the best balance of visual quality and frame rate stability across all three resolutions. At 1080p, Medium produces 265 FPS average with a minimum of 225 FPS and a maximum of 305 FPS, while High only reaches 238 FPS and Ultra drops to 174 FPS. The jump from Medium to High costs 27 FPS at 1080p, but the visual improvement in a city builder is often less critical than maintaining smooth camera panning and zooming.
At 1440p, the Medium preset again stands out with 219 FPS average and a tight 186–252 FPS range. High delivers 164 FPS, which is still very playable, but the 55 FPS gap between Medium and High suggests diminishing returns. At 4K, Medium is the only preset that provides both a high average (116 FPS) and documented frame time consistency, with a minimum of 98 FPS and a maximum of 133 FPS. High at 4K drops to 87 FPS, and Ultra falls to 58 FPS, which approaches the threshold where city-building games start to feel sluggish during large map interactions.
The data indicates that Low settings offer the highest raw frame rates—292 FPS at 1080p, 251 FPS at 1440p, and 151 FPS at 4K—but these come with reduced draw distances and simplified shadows, which matter in a genre where you need to spot resource nodes and worker pathing. Ultra settings, conversely, produce frame rates that are 40–50% below Medium across all resolutions, yet the visual uplift from Medium to Ultra is typically less pronounced than the frame rate penalty. For most players, Medium is the recommended preset, with High as a viable alternative if you have a high-refresh-rate monitor and prioritize visual fidelity over raw headroom.
GPU Role
The NVIDIA GeForce RTX 5090 brings substantial memory and bandwidth resources to Steamworld Build. Its 32 GB of GDDR7 memory on a 512-bit bus provides 1.79 TB/s of bandwidth, which is more than sufficient for the texture streaming and asset loading typical of a city builder. The GPU's 21760 shading units and 680 texture mapping units handle the game's draw calls efficiently, while 176 ROPs ensure that pixel fill rates keep up with large on-screen populations and building clusters.
Clock speeds matter here: the base clock of 2017 MHz and boost clock of 2407 MHz allow the RTX 5090 to maintain high utilization even when the CPU is feeding it data. In Steamworld Build, the GPU's role becomes more pronounced at higher resolutions and settings. The data shows that at 4K Ultra, the average FPS drops to 58, which is 33% lower than 4K High (87 FPS). This suggests that the GPU is the limiting component at 4K Ultra, as the additional shading and texture work overwhelms even the 32 GB frame buffer's capacity to pre-cache assets.
At 1080p, the GPU is less stressed, with Low settings producing 292 FPS and Medium producing 265 FPS. The gap between Low and Medium at 1080p is only 27 FPS, while at 4K the same settings gap is 35 FPS (151 vs 116). This widening gap indicates that the GPU's compute resources are increasingly taxed as resolution scales. The RTX 5090's 104.8 TFLOPS of FP32 performance is ample for Steamworld Build's simulation logic, but the game's rendering pipeline—particularly shadow maps and ambient occlusion at Ultra—can still bottleneck the GPU at 4K.
How This Combo Ranks
The AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5090 combination ranks 203rd out of 3,706 tested combos in Steamworld Build. This places it in the top 5.5% of all configurations tested, which is a strong result given that the CPU is a mid-range Zen 3 part from 2022. The RTX 5090 is doing most of the heavy lifting here, as the Ryzen 7 5700's 8 cores and 16 threads are sufficient for the game's single-threaded simulation updates, but they don't push the system into the top 100.
The Ryzen 7 5700's benchmark scores provide context: its Cinebench R23 multi-core score of 20,655 and single-core score of 2,916 are respectable but not class-leading. The CPU's percentile rank of 78 means it outperforms 78% of all CPUs tested, but it sits near the bottom of the 5000-series desktop lineup. In Steamworld Build, this CPU is capable of feeding the RTX 5090 at 1080p and 1440p, as evidenced by the high frame rates, but the 4K Ultra result of 58 FPS suggests that the GPU is the primary bottleneck at that setting.
Compared to the nearest CPU rivals, the Ryzen 7 5700's average benchmark score of 25,517 is within 0.3% of the AMD Ryzen 5 7640U and 0.1% of the Intel Xeon D-2752TER. This means the CPU is not a significant differentiator in this combo's ranking. The RTX 5090, with its 92nd percentile rank among all GPUs, is what boosts this combination. Its average benchmark score of 79,842 is 0.3% higher than the NVIDIA Tesla P100 PCIe 16 GB and 1.1% higher than the AMD Radeon RX 6850M XT, showing that the GPU is performing near the top of its class.
Measured FPS Breakdown
At 1920x1080, the measured frame rates are consistently high across all settings. Low settings produce an average of 292 FPS, Medium produces 265 FPS (with a 225–305 FPS range), High produces 238 FPS, and Ultra produces 174 FPS. The difference between Low and Ultra is 118 FPS, which represents a 40% performance penalty for maximum visual quality. The Medium preset's minimum of 225 FPS ensures that even during complex city simulations, the frame rate never drops below the refresh rate of most 1080p gaming monitors.
At 2560x1440, the pattern shifts slightly. Low settings average 251 FPS, Medium averages 219 FPS (186–252 FPS range), High averages 164 FPS, and Ultra averages 111 FPS. The Medium to High drop of 55 FPS is larger than the 27 FPS drop at 1080p, indicating that the GPU is starting to become more involved. The Ultra preset at 1440p still delivers 111 FPS, which is playable, but it is 49% below the Low setting's output.
At 3840x2160, the RTX 5090's limits become visible. Low settings average 151 FPS, Medium averages 116 FPS (98–133 FPS range), High averages 87 FPS, and Ultra averages 58 FPS. The Medium preset's minimum of 98 FPS is notable because it stays above the 90 FPS threshold that many players consider smooth for a city builder. High at 4K drops below 90 FPS, and Ultra falls to 58 FPS, which is borderline for this genre. The data shows that 4K Ultra is the only configuration where the frame rate drops below 60 FPS, and even then, the average is close enough to 60 that most players would notice occasional hitches.
Resolution Scaling
Scaling from 1080p to 1440p, the average FPS drops by 17–21% across settings. For example, Medium goes from 265 FPS to 219 FPS (a 17% reduction), while Ultra goes from 174 FPS to 111 FPS (a 36% reduction). The larger percentage drop at Ultra suggests that the GPU is becoming the limiting factor at higher settings, as the additional pixel count amplifies the shading and texture work.
Scaling from 1440p to 4K shows a more dramatic effect. Medium drops from 219 FPS to 116 FPS (a 47% reduction), and High drops from 164 FPS to 87 FPS (a 47% reduction). Low settings drop from 251 FPS to 151 FPS (a 40% reduction), while Ultra drops from 111 FPS to 58 FPS (a 48% reduction). These near-uniform 40–48% reductions across settings indicate that resolution scaling is the dominant factor, and the GPU's fill rate and memory bandwidth are being pushed to their limits.
The 1080p to 4K scaling reveals that the CPU is not the bottleneck. At 1080p Low, the system produces 292 FPS, which would require the CPU to generate a new frame every 3.4 milliseconds. The Ryzen 7 5700's single-thread performance (Cinebench R23 single-core score of 2,916) is sufficient to maintain this pace. However, at 4K Ultra, the frame rate drops to 58 FPS, which is a 80% reduction from 1080p Low. This massive drop is entirely attributable to GPU workload, as the CPU's task (submitting draw calls and simulation updates) does not change with resolution. The data suggests that players with high-refresh-rate 4K monitors should stick to Medium settings to keep frame rates above 100 FPS.
FAQ
Q: What is the best settings preset for a 1440p monitor?
A: Medium settings provide the best experience at 2560x1440. The average FPS of 219 with a minimum of 186 FPS ensures smooth gameplay, while High drops to 164 FPS and Ultra to 111 FPS. The visual difference between Medium and High is not worth the 55 FPS penalty.
Q: Can this combo handle 4K gaming in Steamworld Build?
A: Yes, but with caveats. At 4K Medium, the RTX 5090 delivers 116 FPS average with a 98 FPS minimum, which is smooth. High settings drop to 87 FPS, and Ultra falls to 58 FPS. For a consistent experience, Medium is recommended at 4K.
Q: Is the Ryzen 7 5700 bottlenecking the RTX 5090 in this game?
A: The data indicates the CPU is not a bottleneck at most settings. At 1080p Low, the combo produces 292 FPS, showing the CPU can keep up. The frame rate drops at 4K Ultra (58 FPS) are primarily GPU-driven, as resolution scaling affects the GPU workload much more than the CPU.
Q: How does this combo rank compared to other tested systems?
A: The combo ranks 203rd out of 3,706 tested combinations, placing it in the top 5.5% of all systems. The RTX 5090's high GPU percentile (92nd) contributes more to this ranking than the Ryzen 7 5700's CPU percentile (78th).
Q: What is the frame rate difference between Low and Ultra settings at 1080p?
A: At 1920x1080, Low settings average 292 FPS while Ultra averages 174 FPS. This is a difference of 118 FPS, or roughly 40% lower performance on Ultra. The Medium preset sits in between at 265 FPS.
Q: Are there any settings where the frame rate drops below 60 FPS?
A: Yes, only at 4K Ultra settings, where the average FPS is 58. All other resolution and settings combinations maintain average frame rates above 60 FPS, with the lowest other result being 87 FPS at 4K High.
Hardware Specifications
AMD Ryzen 7 5700
NVIDIA GeForce RTX 5090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5090 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 151.0 |
| 3840x2160 | Medium | 116.0 |
| 3840x2160 | High | 87.0 |
| 3840x2160 | Ultra | 58.0 |
| 2560x1440 | Low | 251.0 |
| 2560x1440 | Medium | 219.0 |
| 2560x1440 | High | 164.0 |
| 2560x1440 | Ultra | 111.0 |
| 1920x1080 | Low | 292.0 |
| 1920x1080 | Medium | 265.0 |
| 1920x1080 | High | 238.0 |
| 1920x1080 | Ultra | 174.0 |
Steamworld Build with Ryzen 7 5700 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 5090 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 7 5700 + RTX 5090
Explore FPS benchmarks for other games using this same hardware combination.