Steamworld Build
This combination delivers exceptional performance with an average of 176 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 59 | 85 | 112 | 147 |
| 1440p QHD | 111 | 160 | 217 | 250 |
| 1080p Full HD | 173 | 239 | 263 | 293 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 7 5700 + NVIDIA GeForce RTX 4090, In-Depth Analysis
Steamworld Build, a city builder from late 2023, presents an interesting scaling profile when paired with the AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4090. The data shows a component combination that is overwhelmingly GPU-bound at higher resolutions, but which begins to reveal CPU limitations at 1080p. The measured frames per second (FPS) across the three resolutions and four quality presets provide a clear picture of where the bottleneck shifts, and the benchmark results indicate that this combo ranks in the 95th percentile of all tested configurations for this title.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and consistent across all settings, which is the hallmark of a GPU-limited scenario. At the High preset, the average frame rate falls from 239 FPS at 1920x1080 to 160.1 FPS at 2560x1440, a reduction of 33%, before settling at 84.8 FPS at 3840x2160. This trajectory shows that the RTX 4090's rendering workload is the primary constraint as pixel count increases. The gap between 1440p and 4K is particularly pronounced, with the 4K result representing only 53% of the 1440p score at High settings, indicating that the raw fill rate and memory bandwidth demands of 4K are exacting a heavy toll.
The scaling pattern becomes even more telling when examining the Low preset. At 1080p Low, the combo achieves 293.4 FPS, but this drops to 250 FPS at 1440p and then plummets to 146.6 FPS at 4K. The relative drop from 1440p to 4K (a 41% reduction) is larger than the drop from 1080p to 1440p (a 15% reduction). This non-linear curve suggests that while the CPU can feed frames at lower resolutions, the GPU's compute and memory subsystems are saturated when pushing 4K, even at the lowest graphical fidelity. The data indicates that the RTX 4090 is the limiting component at 3840x2160, regardless of the preset.
Conversely, at 1080p, the scaling between settings is compressed, which points to a CPU limit. The difference between Low and High at 1080p is only 54.4 FPS (293.4 vs 239), whereas at 4K, the same setting change results in a 61.8 FPS difference (146.6 vs 84.8). This suggests that at 1080p, the Ryzen 7 5700's processing power is the bottleneck, preventing the GPU from fully stretching its legs. The benchmark results indicate that the 5700's single-thread score of 901 in 3dmark_single_thread and its 8-core, 16-thread configuration are sufficient for 1440p and 4K, but at 1080p, the frame rate ceiling is governed by the CPU's ability to issue draw calls.
Settings Recommendations
The measured rows suggest that the Medium preset offers the most balanced experience for this combination, particularly at higher resolutions. At 3840x2160, Medium yields 111.5 FPS, which is a 31% improvement over the 84.8 FPS seen at High, while still delivering a visually rich environment. The jump from Medium to Low at 4K provides a further boost to 146.6 FPS, but the visual fidelity trade-off is typically severe in a city builder where readability of the map is key. The data shows that Medium at 4K is the sweet spot for maintaining high frame rates without sacrificing too much detail.
For users with 1440p displays, the High preset is the recommended starting point, as it delivers 160.1 FPS with ample headroom above the 60 FPS threshold. The Ultra preset at 1440p drops to 110.5 FPS, which is still smooth, but the 49.6 FPS penalty from High to Ultra is substantial for what is often a marginal visual improvement in this genre. At 1080p, the High preset's 239 FPS is more than sufficient for any display, and the data indicates that pushing to Low for 293.4 FPS provides no practical benefit, as the display refresh rate is likely the limiting factor.
The Ultra preset is the outlier in the dataset, representing a significant performance hit across all resolutions. At 4K Ultra, the average FPS falls to 59.4, which is barely above the 60 FPS standard for smooth gameplay. This suggests that Ultra settings are intended for future hardware or for users who prioritize image quality over frame rate. The benchmark results indicate that choosing High over Ultra at 1440p yields a 45% performance increase (160.1 vs 110.5 FPS), making High the more sensible choice for a consistent experience.
GPU Role
The NVIDIA GeForce RTX 4090 is the dominant component in this pairing, and its specifications align with the observed scaling behavior. With 24 GB of GDDR6X memory on a 384-bit bus, the GPU provides 1.01 TB/s of bandwidth, which is crucial for the texture-heavy scenes common in city builders. The memory clock runs at 1313 MHz, effectively 21 Gbps, and the boost clock of 2520 MHz ensures high compute throughput. The GPU's 16,384 shading units and 512 tensor cores are reflected in its strong 3DMark performance, with a Steel Nomad DX12 score of 9,223 and a Passmark G3D score of 38,194.
The data shows that the RTX 4090's VRAM capacity is not a limiting factor in Steamworld Build, as even at 4K Ultra, the average FPS of 59.4 indicates that the GPU is working hard but not running out of memory. The percentile rank of 91 versus all GPUs underscores its position as a top-tier part, and the nearest rivals in the benchmark database are all professional-grade compute cards like the Tesla T4 and P40, which have similar average scores but are not optimized for gaming workloads. The GPU's FP32 performance of 82.58 TFLOPS is more than adequate for this title's rendering demands.
The relationship between clock speeds and results is evident in the FPS scaling. The boost clock of 2520 MHz, when combined with the 443.5 GPixel/s pixel rate, allows the GPU to maintain high frame rates at 1440p, as seen in the 250 FPS result at Low settings. However, at 4K, the pixel rate becomes a bottleneck, as the GPU must process four times the pixels of 1080p, which explains the significant drop to 146.6 FPS at the same Low preset. The texture rate of 1,290.2 GTexel/s is also a factor, as the Medium and High presets at 4K show a clear degradation from 111.5 to 84.8 FPS, indicating that the texture filtering load is substantial.
How This Combo Ranks
In the database of tested combinations for Steamworld Build, this pairing of the AMD Ryzen 7 5700 and NVIDIA GeForce RTX 4090 holds the 85th position out of 1,730 tested combos. This rank places it in the top 5% of all configurations, which is an exceptional result given that the CPU is a mid-range 5000-series part. The combo's performance is driven almost entirely by the GPU, as the RTX 4090's average benchmark score of 66,473 is significantly higher than the CPU's average of 27,220, indicating that the graphics card is the primary contributor to the frame rates.
The rank of 85 out of 1,730 also implies that there are 84 combos that outperform this one, likely featuring newer, higher-end CPUs that can better feed the RTX 4090 at 1080p. However, the data shows that the gap is narrow, as the CPU's nearest rivals in the benchmark database, such as the Intel Core i9-9900K and the Core i7-12700H, have average scores within 0.8% of the Ryzen 7 5700. This suggests that the CPU is not a significant differentiator in this game, and the combo's rank is primarily a function of the GPU's raw power. The percentile rank of 84 for the CPU versus all processors further confirms that it is a capable, if not top-tier, partner for the RTX 4090.
CPU Role
The AMD Ryzen 7 5700, with its 8 cores and 16 threads based on the Zen 3 architecture, plays a supporting role in this combination. Its base clock of 3.70 GHz and boost clock of 4.60 GHz provide solid single-thread performance, as evidenced by the Cinebench R23 single-core score of 2,916 and the 3dmark_single_thread score of 901. In Steamworld Build, which is a simulation-heavy genre, the CPU's multi-threading capabilities are also relevant, and the 3dmark_max_threads score of 6,617 and Cinebench R23 multi-core score of 20,655 indicate strong parallel processing for game logic and AI pathfinding.
The data reveals that the CPU's role becomes more critical at lower resolutions. At 1080p, the frame rates are capped by the CPU, as the difference between Low (293.4 FPS) and High (239 FPS) is relatively small, suggesting that the CPU is struggling to keep up with the GPU's output. The 16 MB of L3 cache and 51.2 GB/s of memory bandwidth are adequate for this workload, but the CPU's 65W TDP and PCIe Gen 3 interface may be minor constraints. The benchmark results indicate that the Ryzen 7 5700 is not a bottleneck at 1440p and 4K, where the GPU is the clear limiting factor, but it does prevent the system from achieving the absolute maximum frame rates at 1080p.
The CPU's nearest rivals in the benchmark database, including the Intel Core i9-9900K and AMD Ryzen AI 5 340, have average scores that are nearly identical, with a deltaPct of 0.7% to 1.2%. This suggests that the Ryzen 7 5700 is well-matched to its peers in synthetic tests, and its performance in Steamworld Build is representative of its class. The 8-core, 16-thread configuration is a good fit for city builders, which often utilize multiple threads for different simulation systems, and the data shows that the CPU does not prevent the RTX 4090 from delivering high frame rates at 1440p and 4K.
Measured FPS Breakdown
At 1920x1080, the combo delivers its highest frame rates. The Low preset achieves an average of 293.4 FPS, which is the peak performance in the dataset. Medium follows at 263 FPS, High at 239 FPS, and Ultra at 173 FPS. The progression from Low to Ultra shows a 41% reduction in performance, which is the smallest relative drop across all resolutions, confirming the CPU-bound nature of 1080p. The 1080p results are all well above 144 Hz, making this combination ideal for high-refresh-rate monitors.
Moving to 2560x1440, the frame rates remain high but show a more pronounced drop with increasing settings. Low produces 250 FPS, Medium 216.5 FPS, High 160.1 FPS, and Ultra 110.5 FPS. The transition from High to Ultra at 1440p is a 31% reduction, which is a significant hit. The 1440p results indicate that the RTX 4090 is starting to feel the load, but the Ryzen 7 5700 is still able to provide enough data to keep the GPU busy.
At 3840x2160, the GPU is firmly in control. Low settings yield 146.6 FPS, Medium 111.5 FPS, High 84.8 FPS, and Ultra 59.4 FPS. The Ultra result is the only one below 60 FPS in the entire dataset, and it represents a 59.5% drop from the Low preset at the same resolution. The 4K results show that even the RTX 4090 cannot maintain high frame rates at maximum settings, and users will need to compromise on quality to achieve smooth gameplay. The data shows a clear, linear relationship between settings and FPS at 4K, with each step from Low to Ultra costing roughly 20-30 FPS.
Hardware Specifications
AMD Ryzen 7 5700
NVIDIA GeForce RTX 4090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700 + NVIDIA GeForce RTX 4090 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 146.6 |
| 3840x2160 | Medium | 111.5 |
| 3840x2160 | High | 84.8 |
| 3840x2160 | Ultra | 59.4 |
| 2560x1440 | Low | 250.0 |
| 2560x1440 | Medium | 216.5 |
| 2560x1440 | High | 160.1 |
| 2560x1440 | Ultra | 110.5 |
| 1920x1080 | Low | 293.4 |
| 1920x1080 | Medium | 263.0 |
| 1920x1080 | High | 239.0 |
| 1920x1080 | Ultra | 173.0 |
Steamworld Build with Ryzen 7 5700 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 4090 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 7 5700 + RTX 4090
Explore FPS benchmarks for other games using this same hardware combination.