Steamworld Build

Steamworld Build

AVERAGE FPS
78
good

This combination provides smooth gameplay with an average of 78 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 23 33 45 58
1440p QHD 43 63 84 110
1080p Full HD 67 99 133 173

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 58
3840x2160 Medium 45
3840x2160 High 33
3840x2160 Ultra 23
2560x1440 Low 110
2560x1440 Medium 84
2560x1440 High 63
2560x1440 Ultra 43
1920x1080 Low 173
1920x1080 Medium 133
1920x1080 High 99
1920x1080 Ultra 67

Steamworld Build with AMD Ryzen 7 5700 + NVIDIA GeForce RTX 2060, In-Depth Analysis

FAQ

Q: What is the overall rank of this AMD Ryzen 7 5700 + NVIDIA GeForce RTX 2060 combination in Steamworld Build?

A: The combo ranks 2904 out of 3706 tested configurations, placing it in the 78th percentile of all tested combos — meaning roughly 22% of tested systems perform worse in this game.

Q: Which resolution and settings pair delivers the highest average framerate?

A: At 1920x1080 with Low settings, the system achieves 173 FPS average. That is the highest measured FPS in the entire dataset for this combo.

Q: Is 4K gaming viable with this hardware in Steamworld Build?

A: At 3840x2160, only the Low preset reaches a playable average of 58 FPS. Medium drops to 45 FPS, High falls to 33 FPS, and Ultra bottoms out at 23 FPS — which is generally considered too low for smooth city-building gameplay.

Q: How does the RTX 2060 compare to its nearest rivals in synthetic benchmarks?

A: The RTX 2060's average benchmark score of 15290 is essentially tied with the GTX 580 (deltaPct 0), 0.1% ahead of the AMD Radeon 680M, 0.6% behind the RTX 3050 OEM, and 0.8% behind the Radeon RX 7600.

Q: What is the CPU's multi-threaded capability relative to its closest competitors?

A: The Ryzen 7 5700 scores 20655 in Cinebench R23 multicore. Its average benchmark score of 25517 is within 0.3% of the AMD Ryzen 7 5825U, 0.1% of the Intel Xeon D-2752TER, and 0.1% of the AMD Ryzen 5 6600H — all four chips are effectively in a dead heat.

Q: Does the data show a consistent framerate advantage for Medium settings over High?

A: Yes. Across all three resolutions, Medium outperforms High by a significant margin: 36% at 1080p (133 vs 99 FPS), 33% at 1440p (84 vs 63 FPS), and 36% at 2160p (45 vs 33 FPS).

How This Combo Ranks

The data places this Ryzen 7 5700 + RTX 2060 pairing at rank 2904 out of 3706 tested combos in Steamworld Build. That is a lower-third placement, but the context matters. The CPU alone sits at the 78th percentile among all processors, while the GPU ranks at the 58th percentile among all graphics cards. The system is held back more by the graphics side than the processor side.

Looking at the measured results, this rank makes sense. The system can push 173 FPS at 1080p Low, which is excellent, but it struggles to maintain 60 FPS at 1440p High (63 FPS average) and falls well short at 4K Ultra (23 FPS). The gap between Low and Ultra at each resolution is stark: at 1080p, that is 173 FPS down to 67 FPS; at 1440p, 110 FPS down to 43 FPS; at 2160p, 58 FPS down to 23 FPS. This profile — strong at low settings, weak at high settings — is typical for a mid-range GPU from 2019 paired with a capable 2022 CPU.

The CPU's synthetic scores reinforce its role. A Cinebench R23 multicore score of 20655 and a Passmark multithread score of 24303 indicate plenty of headroom for simulation-heavy city-builder logic. The GPU's Passmark G3D score of 14111 is respectable but not exceptional, which aligns with the observed framerate scaling.

In practical terms, this combo is best treated as a 1080p machine for Steamworld Build. It can handle 1440p with settings turned down, but 4K is only playable at Low preset. The rank of 2904/3706 reflects this: there are many faster combos, but also a substantial number of slower ones. The percentile data for both components suggests the bottleneck is the GPU in most scenarios, though the CPU's single-thread score of 901 in 3DMark single-thread and 3296 in Passmark single-thread are adequate for the genre's typical thread demands.

Settings Recommendations

For the best experience per the measured data, the Medium preset at 1920x1080 is the sweet spot. It delivers 133 FPS average with a minimum of 113 FPS and a maximum of 153 FPS. That framerate range is smooth enough for a city builder, where rapid camera panning and zooming need consistent frame pacing rather than extreme peak numbers.

If you prioritize visual fidelity over raw speed, the High preset at 1080p still hits 99 FPS average, which is comfortable. The jump from Medium to High costs 34 FPS (a 26% drop), while the jump from High to Ultra costs another 32 FPS (a 32% drop). The data shows diminishing returns: Ultra at 67 FPS is playable, but the 66 FPS difference between Low and Ultra at 1080p suggests the GPU is doing heavy lifting for effects that may not matter much in a top-down builder.

At 2560x1440, the Medium preset at 84 FPS average (min 72, max 97) is the clear recommendation. It stays above 60 FPS even in the measured minimum, which is the threshold for comfortable play in this genre. High at 63 FPS is acceptable but leaves less headroom for late-game city complexity. Low at 110 FPS is smooth but sacrifices too much visual clarity for a game where reading your layout matters.

For 3840x2160, the Low preset at 58 FPS is the only playable option. Medium at 45 FPS (min 38) will feel sluggish during busy scenes, and High at 33 FPS is borderline unplayable. If 4K is your target, stick with Low and accept the visual compromises. The measured minimum of 38 FPS at 4K Medium indicates frame drops that would be noticeable in a city builder where you are constantly scrolling and placing buildings.

The most balanced choice overall is 1080p Medium: 133 FPS average, 113 FPS minimum, and enough visual detail to read the game clearly. For 1440p users, Medium is also the best trade-off. The data consistently shows that Medium offers the best framerate-per-visual-quality ratio across all resolutions.

Measured FPS Breakdown

At 1920x1080, the system shows a wide spread across presets. Low hits 173 FPS average, which is the highest score in the entire dataset. Medium delivers 133 FPS average with a minimum of 113 FPS and maximum of 153 FPS. High reaches 99 FPS average. Ultra drops to 67 FPS average. The progression from Low to Ultra is: 173, 133, 99, 67 — each step down is roughly a 25-35% reduction in framerate.

At 2560x1440, the numbers scale down predictably. Low produces 110 FPS average. Medium delivers 84 FPS average with a minimum of 72 FPS and maximum of 97 FPS. High reaches 63 FPS average. Ultra falls to 43 FPS average. The delta between Medium and High here is 21 FPS, and between High and Ultra is 20 FPS — a consistent drop pattern.

At 3840x2160, the system struggles. Low manages 58 FPS average. Medium drops to 45 FPS average with a minimum of 38 FPS and maximum of 51 FPS. High falls to 33 FPS average. Ultra bottoms out at 23 FPS average. The gap between Low and Medium is 13 FPS, Medium to High is 12 FPS, and High to Ultra is 10 FPS — the GPU is running out of bandwidth and shading power at this resolution.

Comparing across resolutions at the same settings reveals the scaling. At Medium, 1080p gives 133 FPS, 1440p gives 84 FPS (37% lower), and 2160p gives 45 FPS (66% lower than 1080p). At High, 1080p gives 99 FPS, 1440p gives 63 FPS (36% lower), and 2160p gives 33 FPS (67% lower). The resolution scaling is consistent, suggesting the GPU is the limiting factor rather than the CPU.

The minimum FPS data is only available for Medium presets: 113 at 1080p, 72 at 1440p, and 38 at 2160p. These minimums represent the worst-case frame drops, which typically occur when the camera pans over densely built areas or during resource-intensive simulation updates. The fact that the 1440p Medium minimum stays above 60 FPS is encouraging, while the 2160p Medium minimum of 38 FPS would be noticeable stutter.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture at 12 nm with 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth. Its base clock is 1365 MHz with a boost clock of 1680 MHz, and memory runs at 1750 MHz (14 Gbps effective). The chip contains 1920 shading units, 120 texture mapping units, and 48 ROPs, along with 30 RT cores and 240 tensor cores. Peak FP32 performance is 6.451 TFLOPS.

In Steamworld Build, the GPU's role is dominant. The measured framerate scaling with resolution and settings — 173 FPS at 1080p Low down to 23 FPS at 4K Ultra — points directly at GPU-bound performance. The 6 GB VRAM is sufficient for this game's city-building visuals at 1080p and 1440p, but the 4K Ultra preset likely stresses memory capacity and bandwidth, contributing to the 23 FPS result.

The GPU's synthetic scores reinforce its mid-range positioning. A Passmark G3D score of 14111 places it at the 58th percentile among all GPUs. Its nearest rivals in average benchmark score are the GTX 580 (deltaPct 0), AMD Radeon 680M (0.1% ahead), RTX 3050 OEM (0.6% ahead), and Radeon RX 7600 (0.8% ahead). This means the RTX 2060 is effectively in a tight cluster with integrated graphics and entry-level cards — not a high-end performer by current standards.

The DirectX 12 benchmark score of 53 in Passmark is notably low, which is relevant because Steamworld Build likely uses modern rendering features. The DirectX 11 score of 110 is much higher, suggesting the card is more comfortable with legacy APIs. This could explain why higher presets, which may use more advanced rendering paths, see such steep framerate penalties.

The GPU's 58th percentile ranking versus the combo's 2904/3706 rank shows that while the GPU is average, the CPU's 78th percentile positioning does not compensate enough in this game. The RTX 2060's 6 GB VRAM and 336.0 GB/s bandwidth are the practical limits — at 4K, the bandwidth is insufficient to feed the shading units at higher presets, resulting in the observed 23-58 FPS range.

CPU Role

The AMD Ryzen 7 5700 is a Zen 3 (Cezanne) processor on TSMC's 7 nm process, featuring 8 cores and 16 threads. Base clock is 3.70 GHz with a boost clock of 4.60 GHz, and it carries a 65 W TDP. The cache hierarchy includes 64 KB L1 per core, 512 KB L2 per core, and 16 MB L3 total. Memory support is dual-channel DDR4 with 51.2 GB/s bandwidth, and it connects via PCIe Gen 3 with 20 lanes.

In Steamworld Build, the CPU's role is secondary but still relevant. The game is a city builder, which typically involves simulation logic that can scale across multiple cores. The 8-core/16-thread configuration with a Cinebench R23 multicore score of 20655 provides substantial headroom for this type of workload. The Passmark multithread score of 24303 and 3DMark 16-thread score of 6628 indicate strong parallel performance.

However, single-thread performance matters too. The 3DMark single-thread score of 901 and Cinebench R23 single-core score of 2916 are solid but not exceptional. In a city builder, the main thread often handles UI and input, while simulation threads may run in parallel. The data shows the CPU is not the bottleneck in this combo — the framerate drops at higher settings and resolutions align with GPU load, not CPU limits.

The CPU's percentile ranking of 78th among all CPUs, with an average benchmark score of 25517, places it well above average. Its nearest rivals — Intel Xeon D-2752TER (deltaPct -0.1), AMD Ryzen 5 7640U (0.1% ahead), AMD Ryzen 5 6600H (deltaPct -0.1), and AMD Ryzen 7 5825U (0.3% ahead) — are all within 0.3% of its score, meaning the Ryzen 7 5700 is competitive with a range of mobile and server chips.

The CPU's 16 threads are likely sufficient for Steamworld Build's simulation needs. The fact that framerates at 1080p Low reach 173 FPS suggests the CPU can feed the GPU adequately at lower settings. At higher settings, the GPU becomes the limiting factor, as evidenced by the steep framerate declines from Low to Ultra at every resolution. The CPU's 51.2 GB/s memory bandwidth and dual-channel DDR4 support are adequate for this game, and the 16 MB L3 cache helps with repeated access to simulation data.

In practical terms, the Ryzen 7 5700 provides a stable foundation for this combo. Its 8 cores handle city-building simulation without becoming a bottleneck, but it cannot compensate for the RTX 2060's limitations at high settings and resolutions. The data shows the CPU is not the reason this combo ranks 2904 out of 3706 — the GPU holds it back.

Hardware Specifications

AMD Ryzen 7 5700

Cores / Threads 8 / 16
Base Clock 3700 MHz
Boost Clock 4600 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 2060

VRAM 6 GB GDDR6
Base Clock —
Boost Clock 1680 MHz MHz
TDP 160 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5700 + NVIDIA GeForce RTX 2060 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 58.0
3840x2160 Medium 45.0
3840x2160 High 33.0
3840x2160 Ultra 23.0
2560x1440 Low 110.0
2560x1440 Medium 84.0
2560x1440 High 63.0
2560x1440 Ultra 43.0
1920x1080 Low 173.0
1920x1080 Medium 133.0
1920x1080 High 99.0
1920x1080 Ultra 67.0

Steamworld Build with Ryzen 7 5700 + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 2060 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 7 5700 + RTX 2060

Explore FPS benchmarks for other games using this same hardware combination.