Steamworld Build
This combination provides smooth gameplay with an average of 77 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 24 | 35 | 42 | 57 |
| 1440p QHD | 43 | 61 | 82 | 108 |
| 1080p Full HD | 67 | 97 | 135 | 176 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060, In-Depth Analysis
Steamworld Build presents an interesting scaling challenge for the AMD Ryzen 5 5600 and NVIDIA GeForce RTX 2060 combination. The measured frame rates across resolutions reveal a system that is heavily influenced by graphical settings, with the GPU increasingly becoming the primary constraint as resolution climbs. The data shows a clear hierarchy where lower settings unlock substantial performance headroom, while Ultra settings demand more than this hardware can comfortably deliver at higher resolutions.
Resolution Scaling
The transition from 1920x1080 to 3840x2160 produces a dramatic and consistent drop in performance across all settings, indicating that the RTX 2060's rendering capabilities are the dominant factor at higher pixel counts. At High settings, the average frame rate falls from 96.8 FPS at 1080p to 61 FPS at 1440p, a reduction of approximately 37%, and then further down to 35.3 FPS at 4K, representing a 64% total decline from the 1080p baseline. This steep degradation curve is typical of a GPU-bound scenario where the 6 GB frame buffer and 192-bit memory interface struggle to keep pace with the increased pixel throughput.
The Low settings row provides the clearest evidence of GPU limitation. At 1080p Low, the system achieves 175.7 FPS, but this drops to 108.3 FPS at 1440p and 56.7 FPS at 4K. The 4K Low result is notably higher than the 4K High result (56.7 vs 35.3 FPS), showing that reducing graphical complexity can partially offset the resolution penalty. However, even at Low settings, the 4K frame rate is less than one-third of the 1080p Low figure, confirming that the RTX 2060's raw throughput is the limiting component rather than the CPU. The Ryzen 5 5600's six cores and twelve threads, with a boost clock of 4.40 GHz, appear sufficient to feed the GPU at lower resolutions, but the GPU's 6.451 TFLOPS FP32 performance and 336.0 GB/s memory bandwidth become the bottleneck as pixel count increases.
How This Combo Ranks
Within the benchmark database, this specific CPU-GPU pairing achieves a combo rank of 1417 out of 1730 tested combinations for Steamworld Build. This places the system in the lower portion of the ranking distribution, with roughly 82% of tested combos delivering higher average frame rates. The ranking reflects the RTX 2060's position in the GPU hierarchy; the card sits at the 58th percentile among all GPUs, meaning 42% of GPUs outperform it. The CPU is comparatively stronger, with the Ryzen 5 5600 ranking at the 79th percentile among all processors.
The GPU's nearest rivals in the benchmark database provide context for its performance level. The AMD Radeon RX 7600S scores just 0.5% higher in average benchmark score, while the AMD Radeon Pro 5600M and Pro 5700 both score 1.7% higher. The AMD Radeon Pro W5500 trails by 1.8%. These small deltas indicate that the RTX 2060 sits in a tightly contested performance band, and the combo ranking in Steamworld Build is consistent with this mid-pack positioning. The CPU's nearest rivals show similar tight clustering, with the Intel Xeon D-1746TER just 0.6% ahead and the AMD EPYC 9554P and EPYC 9534 both 0.6% behind. The Intel Core i7-11700F leads by 0.9%. This suggests that neither component dramatically shifts the combo's standing; the overall rank is largely determined by the GPU's performance ceiling in this city builder title.
Settings Recommendations
The measured data suggests that High settings at 1920x1080 provide the most balanced experience, with an average of 96.8 FPS. This frame rate is comfortably above smooth gameplay thresholds while maintaining visual quality. Medium settings at 1080p push performance to 135.1 FPS, offering a substantial margin for users with high refresh rate displays, but the visual reduction may not be necessary given the High preset's already strong performance.
At 2560x1440, High settings deliver 61 FPS, which is playable but approaches the lower boundary of smoothness for action-heavy scenes. Medium settings at this resolution produce 82.3 FPS, making it the recommended choice for 1440p users who prioritize frame rate stability. Low settings at 1440p reach 108.3 FPS, but the visual trade-off is significant. For 3840x2160, the data indicates that Low settings at 56.7 FPS is the only viable option for responsive gameplay, as High drops to 35.3 FPS and Ultra falls to 23.6 FPS. Medium at 4K yields 41.8 FPS, which is borderline but may be acceptable for slower-paced city building. Ultra settings are not recommended at any resolution, as even 1080p Ultra only achieves 66.7 FPS, a modest gain over High at 1440p.
Measured FPS Breakdown
At 1920x1080, the performance envelope spans from 175.7 FPS at Low to 66.7 FPS at Ultra. The step from Low to Medium reduces frame rate by 40.6 FPS (135.1 FPS), and the step from Medium to High reduces it by another 38.3 FPS (96.8 FPS). The jump from High to Ultra is the most punishing, with a 30.1 FPS drop to 66.7 FPS. This pattern suggests that Ultra settings introduce disproportionately heavy effects that stress the GPU.
At 2560x1440, the same progression yields 108.3 FPS at Low, 82.3 FPS at Medium, 61 FPS at High, and 42.5 FPS at Ultra. The relative scaling is similar to 1080p, with each settings tier costing roughly 20-24 FPS. The 1440p results show that High settings maintain a 60+ FPS average, which is a notable achievement for this GPU in a city builder. At 3840x2160, performance compresses significantly: Low delivers 56.7 FPS, Medium 41.8 FPS, High 35.3 FPS, and Ultra 23.6 FPS. The gap between Low and Ultra at 4K is 33.1 FPS, and even the best 4K result falls below the 1080p High figure.
GPU Role
The NVIDIA GeForce RTX 2060 features 6 GB of GDDR6 memory on a 192-bit bus, yielding 336.0 GB/s of bandwidth. The card's 1920 shading units and 120 texture mapping units operate at a base clock of 1365 MHz and boost up to 1680 MHz. These specifications place the GPU at the 58th percentile among all tested GPUs, with an average benchmark score of 16074. The measured results in Steamworld Build align with this mid-range positioning, as the card handles 1080p High settings with ease but struggles to maintain playable frame rates at 4K Ultra.
The GPU's 6 GB memory capacity appears sufficient for this game at 1080p and 1440p, as evidenced by the 61 FPS High result at 2560x1440. However, the 4K results suggest that memory bandwidth becomes a limiting factor, with the 336.0 GB/s throughput insufficient to sustain high texture quality at 3840x2160. The card's 160 W TDP and dual-slot design are consistent with its performance class, and the 1x 8-pin power connector reflects the modest power requirements. The RTX 2060's position relative to rivals—within 1.8% of the AMD Radeon Pro W5500 and 1.7% of the Pro 5600M—indicates that its performance is highly competitive within its price-performance tier, though the card is now end-of-life.
CPU Role
The AMD Ryzen 5 5600 provides six cores and twelve threads based on the Zen 3 architecture, with a base clock of 3.50 GHz and a boost clock of 4.40 GHz. The CPU's 32 MB of shared L3 cache and dual-channel DDR4 memory support with 51.2 GB/s bandwidth contribute to its strong overall performance, ranking at the 79th percentile among all CPUs with an average benchmark score of 21765. The processor's single-thread performance, as shown by a 3dmark single-thread score of 882, is particularly relevant for Steamworld Build, which likely relies on a primary simulation thread.
The CPU's 7 nm TSMC process and 65 W TDP make it an efficient choice, and its 4,150 million transistors in a 74 mm² die size indicate a dense design. In Steamworld Build, the CPU appears to be more than adequate for the GPU at all tested settings, as frame rates scale almost entirely with resolution and graphical preset rather than showing CPU-related plateaus. The Ryzen 5 5600's nearest rivals all score within 0.9% of its average, suggesting that any of these CPUs would produce similar results in this game. The processor's 3dmark_max_threads score of 5659 and cinebench_r23_multicore score of 18309 confirm its multi-threaded capabilities, but the game's frame rate data indicates that the GPU is the definitive bottleneck at 1440p and 4K, while even the modestly threaded workload at 1080p does not stress the CPU to its limits.
Hardware Specifications
AMD Ryzen 5 5600
NVIDIA GeForce RTX 2060
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600 + NVIDIA GeForce RTX 2060 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 56.7 |
| 3840x2160 | Medium | 41.8 |
| 3840x2160 | High | 35.3 |
| 3840x2160 | Ultra | 23.6 |
| 2560x1440 | Low | 108.3 |
| 2560x1440 | Medium | 82.3 |
| 2560x1440 | High | 61.0 |
| 2560x1440 | Ultra | 42.5 |
| 1920x1080 | Low | 175.7 |
| 1920x1080 | Medium | 135.1 |
| 1920x1080 | High | 96.8 |
| 1920x1080 | Ultra | 66.7 |
Steamworld Build with Ryzen 5 5600 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 2060 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 5600 + RTX 2060
Explore FPS benchmarks for other games using this same hardware combination.