Steamworld Build
This combination delivers exceptional performance with an average of 169 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 55 | 84 | 115 | 150 |
| 1440p QHD | 106 | 160 | 213 | 232 |
| 1080p Full HD | 172 | 220 | 247 | 270 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Steamworld Build with AMD Ryzen 5 5500 + NVIDIA GeForce RTX 4090, In-Depth Analysis
# Steamworld Build with AMD Ryzen 5 5500 + NVIDIA GeForce RTX 4090
The AMD Ryzen 5 5500 and NVIDIA GeForce RTX 4090 pairing in Steamworld Build delivers a dataset that is defined by extreme GPU headroom and a CPU that keeps pace surprisingly well. The measured frame rates show a pattern where even the most demanding preset at 4K stays above 54.9 FPS, while lower resolutions push past 269.9 FPS. This combination ranks 125th out of 1,730 tested combos in the game, placing it in the top 7.2% of all configurations tested. The RTX 4090, with its 24 GB GDDR6X memory and 1.01 TB/s bandwidth, appears to be far from the limiting factor in most scenarios, while the Ryzen 5 5500's six Zen 3 cores and 16 MB L3 cache handle the simulation and logic loads of this city builder.
CPU Role
The AMD Ryzen 5 5500 is a 6-core, 12-thread processor based on the Zen 3 architecture, built on TSMC's 7 nm process. Its base clock of 3.60 GHz can boost up to 4.20 GHz. In synthetic benchmarks, it scores 16,429 in Cinebench R23 multi-core and 2,319 in single-core, with an average benchmark score of 20,875 across all tests. Its percentile ranking against all CPUs is 79, meaning it outperforms roughly four out of five processors in the database. The nearest rivals show tight competition: the Intel Core i5-12500 scores 20,897 (0.1% higher), the AMD Ryzen 5 PRO 4655GE scores 20,900 (0.1% higher), the AMD EPYC 7J13 scores 20,845 (0.1% lower), and the Intel Core i5-12600T scores 20,917 (0.2% higher).
In Steamworld Build, a city builder genre where the CPU must manage agent simulations, resource chains, and pathfinding, the Ryzen 5 5500's thread count and single-thread performance are the primary drivers. The data shows that at 1080p, frame rates reach 269.9 FPS on Low settings, which is so high that the CPU's per-core performance becomes the ceiling. At 4K Ultra, the frame rate drops to 54.9 FPS, a figure that is more likely tied to GPU rendering load, but the gap between Low and Ultra at every resolution suggests the CPU is capable enough to feed the RTX 4090 across most settings. The 12 threads from the 6-core design provide enough parallelism for city simulation updates, while the 16 MB L3 cache keeps frequently accessed data close to the cores. The processor's memory bandwidth of 51.2 GB/s over dual-channel DDR4 is not a bottleneck in this game based on the measured results.
FAQ
Q: How does the Ryzen 5 5500 compare to its nearest CPU rivals in general benchmarks?
A: The Ryzen 5 5500's average benchmark score of 20,875 is within 0.2% of all four nearest rivals. The Intel Core i5-12500 and AMD Ryzen 5 PRO 4655GE are each 0.1% higher, the AMD EPYC 7J13 is 0.1% lower, and the Intel Core i5-12600T is 0.2% higher. This places the CPU in a virtual tie with these processors.
Q: What is the best performance result for this combo in Steamworld Build?
A: The highest measured average FPS is 269.9 at 1920x1080 with Low settings. The second-best is 246.6 FPS at the same resolution with Medium settings, followed by 232.3 FPS at 2560x1440 on Low.
Q: Does the RTX 4090 bottleneck the Ryzen 5 5500 in this game?
A: The data shows the GPU has an average benchmark score of 66,473 and ranks in the 91st percentile of all GPUs. At 1080p Low, the combo achieves 269.9 FPS, which is below the RTX 4090's theoretical maximum in many titles, suggesting the CPU limits performance at lower resolutions. At 4K Ultra, the 54.9 FPS result is more consistent with GPU-bound rendering.
Q: How consistent are frame rates across different presets?
A: The measured data only includes average FPS, not minimum or maximum values. However, the averages show a clear and consistent scaling pattern: at each resolution, Low produces the highest FPS, followed by Medium, then High, then Ultra. The deltas between presets are uniform, indicating predictable performance scaling.
Q: What is the combo's overall rank among all tested configurations?
A: The combo ranks 125th out of 1,730 tested combos in Steamworld Build. This places it in the top 7.2% of all configurations, which is notable given that the CPU is a mid-range desktop part paired with an enthusiast-class GPU.
Q: Is the RTX 4090's performance advantage visible in this game?
A: Yes. Even at 4K Ultra, the combo maintains 54.9 FPS, and at 1440p Ultra it reaches 106 FPS. These numbers are high for a city builder, and the 3DMark Steel Nomad DX12 score of 9,223 reflects the GPU's strong raw performance, which carries over to this title.
Resolution Scaling
The measured FPS data shows a clear pattern of diminishing returns as resolution increases. At Low settings, the frame rates are 269.9 FPS at 1080p, 232.3 FPS at 1440p, and 149.5 FPS at 4K. This represents a 13.9% drop from 1080p to 1440p, and a further 35.6% drop from 1440p to 4K. The scaling is more dramatic at higher presets. With High settings, the values are 220.3 FPS at 1080p, 160.1 FPS at 1440p, and 83.9 FPS at 4K. That is a 27.3% reduction from 1080p to 1440p, then a 47.6% reduction from 1440p to 4K.
The Ultra preset shows the steepest decline: 171.6 FPS at 1080p, 106 FPS at 1440p, and 54.9 FPS at 4K. The percentage drops are 38.2% and 48.2% respectively. This pattern indicates that at lower resolutions, the CPU is the limiting factor, as the RTX 4090 could theoretically render far more frames if the processor could feed it. At 4K, the GPU's rendering load increases significantly, and the frame rates become more GPU-bound. The fact that 4K Low still produces 149.5 FPS shows that even at high pixel counts, this GPU has substantial headroom. The gap between 1440p and 4K at every preset suggests that pixel fill rate and memory bandwidth are the key constraints at 4K, while the CPU's single-thread performance caps the 1080p results.
How This Combo Ranks
The combo ranks 125th out of 1,730 total tested combinations in Steamworld Build. This is a strong result, placing the configuration in the top 7.2% of all pairings. The ranking reflects the combination of a high-end GPU with a capable mid-range CPU. The RTX 4090's average benchmark score of 66,473 and its 91st percentile standing among all GPUs are the primary drivers of this high rank. The CPU's 79th percentile ranking contributes positively, though it is clearly the weaker component in this pair.
In practical terms, this rank means that only 124 other CPU-GPU combos tested in this game performed better. Given that the RTX 4090 is the second-fastest consumer GPU in NVIDIA's 40-series lineup based on its benchmark scores, the ranking is expected to be high. The Ryzen 5 5500's performance is sufficient to avoid dragging the combo down dramatically, as evidenced by the 1080p Low result of 269.9 FPS, which is close to what faster CPUs might achieve with the same GPU. The rank of 125 suggests that most combos ranked higher likely use faster CPUs, but the difference in actual gameplay is probably small given the high absolute frame rates.
Measured FPS Breakdown
At 1920x1080, the combo delivers its highest frame rates. Low settings produce 269.9 FPS, Medium reaches 246.6 FPS, High achieves 220.3 FPS, and Ultra drops to 171.6 FPS. The spread between Low and Ultra is 98.3 FPS, which is a 36.4% reduction. At 2560x1440, the results are 232.3 FPS on Low, 213 FPS on Medium, 160.1 FPS on High, and 106 FPS on Ultra. The spread here is 126.3 FPS, a 54.4% reduction from Low to Ultra. At 3840x2160, the numbers are 149.5 FPS on Low, 114.5 FPS on Medium, 83.9 FPS on High, and 54.9 FPS on Ultra. The spread is 94.6 FPS, a 63.3% reduction.
The data reveals that the performance penalty for each preset step is not uniform. At 1080p, the drop from Low to Medium is 23.3 FPS (8.6%), from Medium to High is 26.3 FPS (10.7%), and from High to Ultra is 48.7 FPS (22.1%). At 1440p, the drops are 19.3 FPS (8.3%), 52.9 FPS (24.8%), and 54.1 FPS (33.8%). At 4K, the drops are 35 FPS (23.4%), 30.6 FPS (26.7%), and 29 FPS (34.6%). This shows that at lower resolutions, the Ultra preset incurs a larger relative penalty, while at 4K, even the Medium preset takes a significant hit.
Settings Recommendations
Based on the measured FPS, the optimal preset depends on the target resolution and display refresh rate. At 1920x1080, all four presets exceed 171.6 FPS, so even Ultra is playable on high-refresh displays. The Ultra preset at 1080p delivers 171.6 FPS, which is above 144 Hz, making it the best choice for users with 144 Hz monitors who want maximum visual quality. For 2560x1440, the High preset at 160.1 FPS is the sweet spot for 144 Hz displays, while Ultra at 106 FPS suits 100 Hz or 120 Hz panels. The Medium preset at 213 FPS would be overkill for most displays, but it offers the highest frame rate at this resolution if that is the priority.
At 3840x2160, the situation changes. The High preset produces 83.9 FPS, which is suitable for 60 Hz displays and most 120 Hz TVs. The Ultra preset at 54.9 FPS is still above 30 FPS but is only recommended for users who prioritize visual fidelity over smoothness. The Medium preset at 114.5 FPS is the best choice for 4K displays that support 120 Hz, as it balances frame rate and visual quality. The Low preset at 149.5 FPS is unnecessary at 4K, as the visual compromises are likely too severe for a city builder where UI readability and detail matter. Overall, the data suggests that High or Medium presets provide the best experience across all resolutions, as they maintain high frame rates without the significant performance cost of Ultra.
Hardware Specifications
AMD Ryzen 5 5500
NVIDIA GeForce RTX 4090
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5500 + NVIDIA GeForce RTX 4090 in Steamworld Build
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 149.5 |
| 3840x2160 | Medium | 114.5 |
| 3840x2160 | High | 83.9 |
| 3840x2160 | Ultra | 54.9 |
| 2560x1440 | Low | 232.3 |
| 2560x1440 | Medium | 213.0 |
| 2560x1440 | High | 160.1 |
| 2560x1440 | Ultra | 106.0 |
| 1920x1080 | Low | 269.9 |
| 1920x1080 | Medium | 246.6 |
| 1920x1080 | High | 220.3 |
| 1920x1080 | Ultra | 171.6 |
Steamworld Build with Ryzen 5 5500 + Other GPUs
See how Steamworld Build performs with the same CPU but different graphics cards.
Steamworld Build with RTX 4090 + Other CPUs
See how Steamworld Build performs with the same GPU but different processors.
Other Games with Ryzen 5 5500 + RTX 4090
Explore FPS benchmarks for other games using this same hardware combination.