Steamworld Build

Steamworld Build

AVERAGE FPS
112
good

This combination provides smooth gameplay with an average of 112 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 34 48 62 85
1440p QHD 66 95 125 164
1080p Full HD 98 145 196 228

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 85
3840x2160 Medium 62
3840x2160 High 48
3840x2160 Ultra 34
2560x1440 Low 164
2560x1440 Medium 125
2560x1440 High 95
2560x1440 Ultra 66
1920x1080 Low 228
1920x1080 Medium 196
1920x1080 High 145
1920x1080 Ultra 98

Steamworld Build with AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3070, In-Depth Analysis

Steamworld Build places the AMD Ryzen 5 3600 and NVIDIA GeForce RTX 3070 combination in a clear performance hierarchy. The measured data shows this pairing delivers playable frame rates across most configurations, but the scaling patterns reveal distinct bottlenecks that shift depending on resolution and quality preset. This analysis examines how the component pair behaves in this city builder, using only the measured FPS values and benchmark scores provided.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings, indicating that the RTX 3070 becomes the primary limiting factor as pixel count rises. At High settings, the average FPS falls from 144.9 at 1920x1080 to 95.4 at 2560x1440, a reduction of 49.5 FPS, and then drops further to 48.2 at 3840x2160. This represents a 66.7% decrease from 1080p to 4K, a pattern typical of GPU-bound scenarios where the rendering load scales directly with resolution.

The Low preset shows the same trend but with higher absolute numbers. The average FPS goes from 227.7 at 1080p down to 163.9 at 1440p and then to 85.2 at 4K. The percentage drop from 1080p to 4K is 62.6%, slightly less severe than High, which suggests that at Low settings the CPU has more headroom to feed the GPU, but the GPU still dominates the performance ceiling at higher resolutions. The Medium preset follows a similar path: 195.7 FPS at 1080p, 125.3 at 1440p, and 62.4 at 4K, a 68.1% reduction from the lowest to highest resolution.

Ultra settings produce the most dramatic scaling. At 1080p, the combo manages 97.7 FPS, which drops to 66.1 at 1440p and then to 33.9 at 4K. The 4K result is less than half of the 1080p figure, and the gap between Medium and Ultra at 4K is particularly telling: 62.4 FPS versus 33.9 FPS, a difference of 28.5 FPS. This indicates that Ultra settings impose a heavy additional load that the RTX 3070 cannot sustain at 4K, pushing the experience below the 60 FPS threshold that many users consider the minimum for smooth gameplay.

The data suggests that at 1080p, the CPU plays a more significant role. The jump from High to Low at 1080p is 82.8 FPS (from 144.9 to 227.7), which is a larger absolute gain than at 1440p (68.5 FPS) or 4K (37.0 FPS). This means that at lower resolutions, reducing settings can unlock substantial performance, implying that the Ryzen 5 3600 has enough throughput to drive higher frame rates if the GPU workload is lightened. At 4K, however, the GPU is so heavily loaded that setting changes yield smaller returns, confirming the GPU-bound nature of the combo at that resolution.

GPU Role

The RTX 3070’s memory configuration and clock speeds are central to understanding its performance in Steamworld Build. The GPU features 8 GB of GDDR6 memory on a 256-bit bus, providing 448.0 GB/s of bandwidth. The base clock is 1500 MHz with a boost clock of 1725 MHz, and the memory runs at 1750 MHz with 14 Gbps effective speed. These specifications support the measured FPS patterns, particularly at 4K where the memory bandwidth becomes critical for handling high-resolution textures and geometry.

The 8 GB VRAM capacity is sufficient for most of the tested settings, but the Ultra preset at 4K likely stresses the memory subsystem. The average FPS of 33.9 at 4K Ultra is the lowest in the entire dataset, and while the frame rate alone does not prove a VRAM limitation, the steep drop from Medium (62.4 FPS) to Ultra (33.9 FPS) suggests that the additional memory usage and shading complexity overwhelm the GPU. The RTX 3070’s 5888 shading units and 96 ROPs provide the raw compute power, but the 8 GB capacity may force texture swapping or compression at the highest settings, contributing to the poor 4K Ultra result.

The GPU’s benchmark scores place it in the 72nd percentile among all GPUs, with an average benchmark score of 28238. Its nearest rival, the AMD Radeon RX 6600 XT, scores 27985, a delta of 0.9%, meaning the RTX 3070 is about 0.9% faster. The NVIDIA GeForce GTX 980 Ti scores 27956, a 1% difference. These close margins indicate that the RTX 3070 sits in a competitive performance band, but the measured FPS in Steamworld Build shows that it still struggles with the most demanding settings at 4K.

The GPU’s boost clock of 1725 MHz is relatively modest for a high-end card, but the architecture’s efficiency compensates. The 20.31 TFLOPS FP32 performance is substantial, yet the 4K Ultra result of 33.9 FPS suggests that Steamworld Build’s Ultra preset includes effects that are particularly taxing on the memory system or the shading units. The 165.6 GPixel/s pixel rate and 317.4 GTexel/s texture rate provide context for the resolution scaling: at 4K, the pixel throughput requirement is four times that of 1080p, and the measured FPS drop aligns with this increased load.

FAQ

Q: What is the best resolution and settings combination for this CPU and GPU?

A: At 1920x1080 with High settings, the combo achieves 144.9 FPS, which is well above the 60 FPS threshold. At 2560x1440 with High settings, the average is 95.4 FPS, and 4K with Medium settings yields 62.4 FPS. The highest playable configuration at 4K is Medium, while Ultra at 4K drops to 33.9 FPS.

Q: How does the RTX 3070 compare to its nearest rivals in benchmark scores?

A: The RTX 3070 has an average benchmark score of 28238. The AMD Radeon RX 6600 XT scores 27985, which is 0.9% lower, and the NVIDIA GeForce GTX 980 Ti scores 27956, which is 1% lower. The AMD FirePro S7150 scores 28409, making it 0.6% faster than the RTX 3070.

Q: Is the CPU a bottleneck at any tested resolution?

A: At 1080p, the frame rate gap between Low (227.7 FPS) and High (144.9 FPS) is 82.8 FPS, suggesting the CPU can push higher frame rates when the GPU load is reduced. At 4K, the gap between Low (85.2 FPS) and High (48.2 FPS) is only 37.0 FPS, indicating the GPU becomes the dominant limiter at higher resolutions.

Q: What is the performance drop from 1440p to 4K at High settings?

A: At 2560x1440 with High settings, the average FPS is 95.4. At 3840x2160 with High settings, it drops to 48.2. This represents a reduction of 47.2 FPS, or a 49.5% decrease, when moving from 1440p to 4K.

Q: How does the Ryzen 5 3600’s single-thread performance relate to this game’s results?

A: The CPU scores 2124 in Cinebench R23 single-core and 892 in Cinebench R20 single-core. The 1080p results, particularly the 227.7 FPS at Low settings, indicate that the CPU’s single-thread performance is sufficient to support high frame rates in this city builder, which often relies on simulation logic that favors single-core speed.

Q: What is the combo’s ranking among all tested combinations?

A: The combo ranks 796 out of 1730 tested combinations, placing it in the 46th percentile. This means roughly 46% of tested combos perform worse, and 54% perform better, in Steamworld Build.

Measured FPS Breakdown

At 1920x1080, the combo delivers its highest frame rates. Low settings produce an average of 227.7 FPS, Medium settings reach 195.7 FPS, High settings hit 144.9 FPS, and Ultra settings drop to 97.7 FPS. The gap between Low and Ultra is 130.0 FPS, showing that settings have a massive impact at this resolution. The difference between Medium and High is 50.8 FPS, while the jump from High to Ultra is 47.2 FPS.

At 2560x1440, the frame rates decrease across the board. Low settings average 163.9 FPS, Medium settings reach 125.3 FPS, High settings hit 95.4 FPS, and Ultra settings drop to 66.1 FPS. The gap between Low and Ultra is 97.8 FPS, which is smaller than at 1080p but still substantial. The Medium to High difference is 29.9 FPS, and the High to Ultra difference is 29.3 FPS.

At 3840x2160, the combo struggles to maintain high frame rates. Low settings average 85.2 FPS, Medium settings reach 62.4 FPS, High settings hit 48.2 FPS, and Ultra settings drop to 33.9 FPS. The gap between Low and Ultra is 51.3 FPS, and the Medium to High difference is 14.2 FPS. The High to Ultra difference is 14.3 FPS. Only Low settings exceed 60 FPS at 4K, and Medium barely crosses the threshold.

The scaling from 1080p to 4K is consistent across settings. Low settings drop from 227.7 to 85.2 FPS, a 142.5 FPS reduction. Medium drops from 195.7 to 62.4 FPS, a 133.3 FPS reduction. High drops from 144.9 to 48.2 FPS, a 96.7 FPS reduction. Ultra drops from 97.7 to 33.9 FPS, a 63.8 FPS reduction. The absolute FPS loss decreases with higher settings because the starting point is lower, but the percentage loss remains high.

How This Combo Ranks

The combo ranks 796 out of 1730 tested combinations in Steamworld Build. This places it in the 46th percentile, meaning it outperforms 46% of all tested combos. The ranking reflects the balance between the Ryzen 5 3600 and the RTX 3070, where the GPU provides strong raw performance but the CPU’s older architecture may limit certain aspects of the game’s simulation.

The CPU’s average benchmark score is 18129, and its nearest rival, the Intel Core i5-11400, scores 18150, a delta of -0.1%. This means the Ryzen 5 3600 is effectively tied with the i5-11400, with a difference of only 21 points. The AMD Ryzen 5 7535HS scores 18101, which is 0.2% lower, and the AMD Ryzen 5 1600 scores 18158, which is 0.2% higher. These close margins indicate that the CPU is not a standout performer but also not a weak link in the combo.

The GPU’s average benchmark score is 28238, and its nearest rival, the AMD FirePro S7150, scores 28409, a delta of -0.6%. This places the RTX 3070 slightly below the FirePro but above the RX 6600 XT and GTX 980 Ti. The GPU’s 72nd percentile ranking among all GPUs suggests it is a capable part, but the 4K Ultra result of 33.9 FPS in Steamworld Build shows that the game’s most demanding settings exceed its capabilities at high resolutions.

The combo’s overall rank of 796 is consistent with the individual component rankings. The CPU sits in the 76th percentile among all CPUs, and the GPU sits in the 72nd percentile, so the combo’s 46th percentile rank in this specific game indicates that Steamworld Build is not particularly favorable to this pairing. The game’s city builder genre often relies on CPU-bound simulation logic, and the Ryzen 5 3600’s single-thread score of 2124 in Cinebench R23 may be a limiting factor when compared to newer processors. However, the measured FPS at 1080p and 1440p shows that the combo is more than adequate for smooth gameplay at those resolutions, with the only significant weakness appearing at 4K Ultra settings.

Hardware Specifications

AMD Ryzen 5 3600

Cores / Threads 6 / 12
Base Clock 3600 MHz
Boost Clock 4200 MHz
TDP 65W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce RTX 3070

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 1725 MHz MHz
TDP 220 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 5 3600 + NVIDIA GeForce RTX 3070 in Steamworld Build

Resolution Settings Avg FPS
3840x2160 Low 85.2
3840x2160 Medium 62.4
3840x2160 High 48.2
3840x2160 Ultra 33.9
2560x1440 Low 163.9
2560x1440 Medium 125.3
2560x1440 High 95.4
2560x1440 Ultra 66.1
1920x1080 Low 227.7
1920x1080 Medium 195.7
1920x1080 High 144.9
1920x1080 Ultra 97.7

Steamworld Build with Ryzen 5 3600 + Other GPUs

See how Steamworld Build performs with the same CPU but different graphics cards.

Steamworld Build with RTX 3070 + Other CPUs

See how Steamworld Build performs with the same GPU but different processors.

Other Games with Ryzen 5 3600 + RTX 3070

Explore FPS benchmarks for other games using this same hardware combination.