Rust

The Intel Core i7-14700K and NVIDIA GeForce RTX 5070 combination delivers a strong showing in Rust, a survival title that stresses both CPU and GPU depending on settings. The data shows the combo ranks 246th out of 1717 tested configurations, placing it in the top 15% of all systems. At 1080p Low settings, the pair achieves an average of 240.8 FPS, while the most demanding 4K Ultra preset drops to 41.7 FPS. This range highlights how Rust scales with resolution and graphical fidelity, with the RTX 5070's 12 GB of GDDR7 memory and the i7-14700K's 20 cores playing distinct roles across the spectrum.

FAQ

Q: What is the combo's overall ranking among tested systems in Rust?

A: The Intel Core i7-14700K and NVIDIA GeForce RTX 5070 combination ranks 246th out of 1717 tested combos, placing it in the top 15% of all configurations tested for this game.

Q: How does the CPU compare to its nearest rivals in general benchmark scores?

A: The i7-14700K scores 70074 on average, which is essentially tied with the Intel Core i7-14700KF at 70104 (0% delta). It also sits within 0.5% of the AMD Ryzen 9 9950X (70420) and is 1.4% ahead of the Intel Xeon Platinum 8270 (71056).

Q: What is the best-case FPS scenario for this combo?

A: The highest measured average FPS is 240.8 at 1920x1080 with Low settings. This is more than double the 104.6 FPS seen at the same resolution with Ultra settings.

Q: Does the GPU's memory capacity become a limiting factor at high resolutions?

A: The RTX 5070 has 12 GB of GDDR7 memory with a 192-bit bus and 672.0 GB/s bandwidth. At 4K Ultra, the average FPS drops to 41.7, suggesting that both the memory bandwidth and rendering load are significant bottlenecks at that setting.

Q: How does the RTX 5070's benchmark score compare to the RTX 3090?

A: The RTX 5070 has an average benchmark score of 41687, which is 0.6% higher than the NVIDIA GeForce RTX 3090's 41441. The RTX 5070 also sits within 0.2% of the AMD Radeon Pro 5300's 41610.

Q: What is the frame rate difference between 1080p and 4K at High settings?

A: At High settings, the combo achieves 140.7 FPS at 1920x1080, which drops to 93.3 FPS at 2560x1440 and further to 58.9 FPS at 3840x2160. This represents a 58% reduction in FPS from 1080p to 4K.

GPU Role

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture with the GB205 chip, manufactured on a 5 nm process by TSMC. It houses 6144 shading units, 192 texture mapping units, and 80 raster output units, alongside 48 ray tracing cores and 192 tensor cores. The GPU's base clock is 2325 MHz with a boost clock of 2512 MHz, and its memory runs at 1750 MHz, translating to 28 Gbps effective on a 192-bit bus.

The 12 GB of GDDR7 memory provides a bandwidth of 672.0 GB/s. In Rust, this memory configuration appears to be a critical factor at higher resolutions. Benchmark results show that at 4K Ultra, the combo produces only 41.7 FPS, while at 4K Low it reaches 100.3 FPS. This 58.6 FPS gap between Low and Ultra at 4K indicates that the GPU's rendering pipeline becomes heavily loaded as texture and shading complexity increase. The RTX 5070's FP32 throughput is 30.87 TFLOPS, which supports the high fill rate demands of Rust's open-world environments.

The GPU's 83rd percentile ranking among all GPUs, with an average benchmark score of 41687, places it near the NVIDIA GeForce RTX 3090 (41441) and AMD Radeon Pro 5300 (41610). Given that the RTX 3090 is a previous-generation flagship with more memory, the RTX 5070's comparable score suggests that its newer architecture and faster GDDR7 memory compensate for the smaller 12 GB frame buffer. In Rust, the data shows that the RTX 5070 is capable of driving high frame rates at 1080p, but the 4K Ultra results suggest that the GPU's memory capacity and bandwidth are exhausted at that extreme setting.

Resolution Scaling

The measured FPS data reveals a clear scaling pattern across resolutions. At Low settings, the combo delivers 240.8 FPS at 1080p, 169.8 FPS at 1440p, and 100.3 FPS at 4K. This represents a 58% drop from 1080p to 4K, indicating that even at Low settings, resolution scaling has a substantial impact. At High settings, the drop is even more pronounced: 140.7 FPS at 1080p falls to 93.3 FPS at 1440p and then to 58.9 FPS at 4K, a 58% reduction from 1080p to 4K.

The Ultra settings show the steepest decline. At 1080p Ultra, the combo achieves 104.6 FPS, which drops to 74.7 FPS at 1440p and bottoms out at 41.7 FPS at 4K. This 60% reduction from 1080p to 4K at Ultra settings suggests that the GPU becomes the primary limiting factor at higher resolutions. Conversely, the relatively small gap between Low and Medium settings at each resolution — for example, 240.8 FPS vs 165 FPS at 1080p — indicates that the CPU has more headroom at lower graphical loads.

The scaling behavior suggests a balanced system at 1080p where both the CPU and GPU contribute to performance. At 4K, the GPU's workload dominates, and the 12 GB memory capacity appears to be a constraint, especially at Ultra settings where the average FPS drops below 60. The data shows that the transition from 1440p to 4K at every settings level results in a 40-44% FPS loss, which is consistent with the increase in pixel count from 3.7 million to 8.3 million.

How This Combo Ranks

The combination of the Intel Core i7-14700K and NVIDIA GeForce RTX 5070 ranks 246th out of 1717 tested combos in Rust, placing it in the top 14.3% of all configurations. This ranking reflects the strong synergy between the CPU and GPU, though it is not at the very top of the charts. The i7-14700K's 96th percentile ranking among all CPUs, with an average benchmark score of 70074, suggests that the processor is not the bottleneck in most scenarios. Its nearest rival, the Intel Core i7-14700KF, scores 70104 with a 0% delta, indicating near-identical performance.

The RTX 5070's 83rd percentile ranking among all GPUs, with an average score of 41687, is slightly less impressive but still solid. Its nearest rival, the AMD Radeon Pro 5300, scores 41610 with a 0.2% delta, and the NVIDIA GeForce RTX 3090 scores 41441 with a 0.6% delta. This places the RTX 5070 in a competitive position, though it trails the top-tier GPUs by a wider margin.

Given the combo's 246th rank out of 1717, there are 245 configurations that perform better in Rust, likely featuring higher-end GPUs or CPUs with more cores. However, the data shows that this combo delivers excellent frame rates at 1080p and 1440p across most settings, with only 4K Ultra falling below 60 FPS. The ranking reflects that while the i7-14700K is a top-tier CPU, the RTX 5070 is a mid-to-high-range GPU, and the combination performs accordingly.

Measured FPS Breakdown

At 1920x1080, the combo achieves 240.8 FPS on Low settings, which is the highest measured average across all tests. Medium settings produce 165 FPS, High settings yield 140.7 FPS, and Ultra settings drop to 104.6 FPS. The gap between Low and Ultra at 1080p is 136.2 FPS, indicating that graphical settings have a significant impact on performance even at this resolution.

At 2560x1440, the frame rates decrease across all settings. Low settings deliver 169.8 FPS, Medium produces 113.7 FPS, High achieves 93.3 FPS, and Ultra drops to 74.7 FPS. The difference between Low and Ultra at 1440p is 95.1 FPS, showing that the GPU's workload increases substantially with resolution.

At 3840x2160, the performance drops further. Low settings yield 100.3 FPS, Medium produces 66.6 FPS, High achieves 58.9 FPS, and Ultra bottoms out at 41.7 FPS. The 58.6 FPS difference between Low and Ultra at 4K is the smallest absolute gap among the three resolutions, suggesting that the GPU is becoming saturated at all settings levels. The 4K Ultra result of 41.7 FPS is below the 60 FPS threshold commonly desired for smooth gameplay, while the 4K Low result of 100.3 FPS remains playable.

The data shows a consistent pattern: at each resolution, Low settings provide roughly 1.5 to 2.4 times the frame rate of Ultra settings. Specifically, at 1080p, Low is 2.3 times faster than Ultra; at 1440p, it is 2.3 times faster; and at 4K, it is 2.4 times faster. This consistent ratio suggests that the GPU's rendering workload scales linearly with settings complexity, regardless of resolution.