Rust

Rust

AVERAGE FPS
73
good

This combination provides smooth gameplay with an average of 73 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 39 45 62
1440p QHD 45 59 70 109
1080p Full HD 69 91 107 153

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 62
3840x2160 Medium 45
3840x2160 High 39
3840x2160 Ultra 29
2560x1440 Low 109
2560x1440 Medium 70
2560x1440 High 59
2560x1440 Ultra 45
1920x1080 Low 153
1920x1080 Medium 107
1920x1080 High 91
1920x1080 Ultra 69

Rust with AMD Ryzen 7 5800X3D + NVIDIA GeForce GTX 1080 Ti, In-Depth Analysis

The AMD Ryzen 7 5800X3D paired with the NVIDIA GeForce GTX 1080 Ti presents a study in generational contrast within the game Rust. The CPU, a late-release Zen 3 part with a large 3D-stacked cache, is paired with a Pascal-generation GPU that is now several years old. The measured frame rates across resolutions and settings reveal a system where the graphics card is the primary constraint, though the processor’s unique strengths still shape the experience.

Resolution Scaling

The data shows a clear and consistent drop in frame rate as resolution increases, which is the classic signature of a GPU-bound scenario. At 1080p with High settings, the combo produces 91.2 FPS average. Moving to 1440p drops that to 58.9 FPS, a reduction of roughly 35%. At 4K with the same settings, the average falls to 38.5 FPS, which is less than half of the 1080p figure. This scaling pattern indicates that the GTX 1080 Ti is the limiting component; as pixel count rises, the GPU’s fill rate and memory bandwidth become the decisive factors.

The trend is even more pronounced when examining the Low settings preset. At 1080p Low, the system achieves 152.6 FPS, a very high refresh rate that suggests the CPU is capable of feeding the GPU. However, at 1440p Low, the average drops to 108.8 FPS, and at 4K Low it falls to 62.2 FPS. The percentage drop from 1080p to 4K at Low settings is roughly 59%, which is substantial. This demonstrates that even when the graphical load is minimal, the GPU’s raw throughput at higher resolutions is insufficient to maintain the frame rates seen at 1080p.

The gap between settings narrows as resolution increases, which is another indicator of GPU limitation. At 1080p, the difference between Low (152.6 FPS) and Ultra (68.9 FPS) is 83.7 FPS. At 4K, the difference between Low (62.2 FPS) and Ultra (29.3 FPS) is only 32.9 FPS. This compression of performance at 4K suggests that the GPU is saturated regardless of the quality preset, and the extra work required for higher settings has a relatively smaller absolute impact when the pixel throughput is already the bottleneck.

CPU Role

The AMD Ryzen 7 5800X3D is a desktop processor with 8 cores and 16 threads. Its base clock is 3.40 GHz, with a boost clock of 4.50 GHz. The architecture is Zen 3, built on a 7 nm process. Crucially, it features a large 96 MB shared L3 cache, which is a defining characteristic of this chip. This cache capacity is often beneficial in simulation-heavy games where data needs to be accessed rapidly, though the benchmark data for Rust does not isolate this effect directly.

The CPU’s synthetic benchmarks show strong multi-threaded performance. In Cinebench R23, it scores 24063 in multi-core and 3397 in single-core. The Geekbench scores are 11061 multi-core and 2116 single-core. These numbers place the CPU in the 83rd percentile when compared to all other CPUs, indicating it is a high-end part. Its nearest rivals in terms of average benchmark score include the Intel Core i9-11900K and the AMD Ryzen 5 7600, with score deltas of 0.1% and -0.2%, respectively. This puts the 5800X3D in the same performance class as those processors.

In the context of Rust, the CPU role is likely most important at lower resolutions and lower settings where the GPU is not the bottleneck. The 1080p Low score of 152.6 FPS suggests that the CPU is able to maintain a high frame rate when the GPU load is light. However, the data does not provide a direct measurement of CPU utilization, so the analysis must rely on the scaling behavior. The fact that frame rates drop significantly at higher resolutions indicates that the GPU becomes the limiting factor, which means the CPU’s potential is not fully utilized in those scenarios.

FAQ

Q: What is the average frame rate at 1080p with Ultra settings?

A: The measured average frame rate at 1920x1080 with Ultra settings is 68.9 FPS.

Q: How much of a performance drop is seen from 1440p to 4K at High settings?

A: At 1440p High, the average FPS is 58.9, while at 4K High, it is 38.5. This represents a drop of 20.4 FPS, or approximately 35% lower performance at 4K.

Q: Does the GTX 1080 Ti perform closer to its rivals at any specific resolution?

A: The GPU’s average benchmark score is 19402, which is nearly identical to the NVIDIA GeForce GTX 780 at 19405, a delta of 0%. It is also close to the AMD Radeon Pro 560X with a delta of -0.1%. These comparisons are based on aggregate benchmark averages, not specific Rust frame rates.

Q: What is the best performance result for this combo in the measured data?

A: The highest average frame rate recorded is 152.6 FPS, achieved at 1920x1080 with Low settings.

Q: How does the CPU compare to the Intel Core i9-11900K in average benchmark score?

A: The AMD Ryzen 7 5800X3D has an average benchmark score of 26574, while the Intel Core i9-11900K has an average score of 26546. This gives the AMD processor a delta of 0.1% over the Intel chip.

Q: At which resolution does the frame rate drop below 30 FPS?

A: The only measured configuration that falls below 30 FPS is 3840x2160 with Ultra settings, which produces an average of 29.3 FPS.

How This Combo Ranks

The combo of the AMD Ryzen 7 5800X3D and NVIDIA GeForce GTX 1080 Ti is ranked 983 out of 1717 tested combinations in the game Rust. This places it in the lower half of all tested systems, which is a notable finding given the individual components’ specifications. The rank implies that while the CPU is a high-performer in synthetic tests, the overall system performance is dragged down by the GPU.

This ranking becomes clearer when considering the GPU’s percentile. The GTX 1080 Ti sits in the 61st percentile among all GPUs, which is mid-range. The CPU, in contrast, is in the 83rd percentile. The disparity in their relative performance tiers suggests that the GPU is the weaker link in this pairing, which aligns with the resolution scaling analysis. The system’s rank of 983 out of 1717 suggests that many other combinations, likely those with more modern GPUs, achieve better results in Rust.

The rival comparisons for the GPU reinforce this perspective. The GTX 1080 Ti’s average score of 19402 is nearly identical to the NVIDIA TITAN Xp at 19184, with a delta of 1.1%. This indicates that the GPU is performing as expected for its class. The bottleneck is not a malfunction but a generational limitation; the GPU simply cannot keep pace with the CPU’s ability to process game logic and draw calls in a demanding title like Rust.

GPU Role

The NVIDIA GeForce GTX 1080 Ti is built on the Pascal architecture, using a 16 nm process at TSMC. It has 11 GB of GDDR5X memory on a 352-bit bus, providing a memory bandwidth of 484.4 GB/s. The base clock is 1481 MHz, with a boost clock of 1582 MHz. The GPU features 3584 shading units and 88 ROPs. Its FP32 performance is rated at 11.34 TFLOPS.

These specifications define the GPU’s role in Rust. The 11 GB of VRAM is a significant asset, as Rust can be memory-intensive with large map data and textures. The high memory bandwidth of 484.4 GB/s is also beneficial for streaming texture data at high resolutions. However, the raw compute power, while respectable for its generation, is insufficient for 4K gaming at high settings, as evidenced by the 38.5 FPS average at 4K High.

The GPU’s benchmark results show a Passmark G3D score of 18600, which places it in the 61st percentile. Its nearest rival in terms of average score is the GTX 780, with a delta of 0%. This suggests that while the 1080 Ti is a capable card, it is not a top-tier performer in the current landscape. In Rust, the role of the GPU is to render the scene, and the data shows that it struggles to maintain playable frame rates at 4K Ultra, where it averages 29.3 FPS. At 1440p, it performs better, with an average of 45.1 FPS at Ultra, but the system is clearly more comfortable at 1080p, where it delivers 68.9 FPS at the same settings. The GPU is the definitive limiting factor in this configuration.

Hardware Specifications

AMD Ryzen 7 5800X3D

Cores / Threads 8 / 16
Base Clock 3400 MHz
Boost Clock 4500 MHz
TDP 105W
Socket AMD Socket AM4
View Full CPU Details →

NVIDIA GeForce GTX 1080 Ti

VRAM 11 GB GDDR5X
Base Clock —
Boost Clock 1582 MHz MHz
TDP 250 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for AMD Ryzen 7 5800X3D + NVIDIA GeForce GTX 1080 Ti in Rust

Resolution Settings Avg FPS
3840x2160 Low 62.2
3840x2160 Medium 44.5
3840x2160 High 38.5
3840x2160 Ultra 29.3
2560x1440 Low 108.8
2560x1440 Medium 70.4
2560x1440 High 58.9
2560x1440 Ultra 45.1
1920x1080 Low 152.6
1920x1080 Medium 106.6
1920x1080 High 91.2
1920x1080 Ultra 68.9

Rust with Ryzen 7 5800X3D + Other GPUs

See how Rust performs with the same CPU but different graphics cards.

Rust with GTX 1080 Ti + Other CPUs

See how Rust performs with the same GPU but different processors.

Other Games with Ryzen 7 5800X3D + GTX 1080 Ti

Explore FPS benchmarks for other games using this same hardware combination.