Rust

The AMD Ryzen 5 5600GT paired with the NVIDIA GeForce RTX 2060 delivers a playable, if not always smooth, experience in Rust, with the data showing a clear trade-off between visual fidelity and frame rate. This combination lands at rank 1413 out of 1717 tested combos, placing it in the lower half of the database but with enough headroom to find a workable settings preset depending on your resolution and performance targets.

Settings Recommendations

The measured rows show a consistent pattern: dropping from Ultra to Low settings provides a massive frame rate uplift at every resolution. At 1080p, the jump from Ultra to Low takes the average FPS from 51.6 to 123.1, which is more than doubling the performance. For competitive play or high-refresh-rate monitors, the Low preset is the clear choice, as it is the only setting tier that pushes past the 120 FPS mark at 1080p.

For players prioritizing visual quality while maintaining decent frame rates, the Medium preset offers the best balance. At 1080p, Medium delivers 86.1 FPS, which is 34.5 FPS higher than High and 34.5 FPS below Low, providing a comfortable middle ground. At 1440p, Medium hits 60.3 FPS, which is just above the 60 FPS threshold for smooth gameplay, making it the only non-Low preset to achieve that at this resolution. The High preset is a viable option only at 1080p, where it holds 73.6 FPS, but it falls to 46.5 FPS at 1440p and 26.8 FPS at 4K, making it unsuitable for those higher resolutions.

The Ultra preset is essentially a showcase mode. It produces the lowest frame rates across all resolutions, with a 20.5 FPS average at 4K and 38 FPS at 1440p. The data suggests that Ultra is only usable at 1080p if you can tolerate a 51.6 FPS average, which may feel choppy in a fast-paced survival game. In summary, the Low preset is for maximum performance, Medium is for balanced play, and High/Ultra are for screenshots or hardware that can push beyond this combo's limits.

GPU Role

The NVIDIA GeForce RTX 2060 is a Turing-architecture GPU with a 6 GB GDDR6 memory buffer and a 192-bit memory bus, providing 336.0 GB/s of bandwidth. Its boost clock is rated at 1680 MHz. The data shows that the GPU is a significant bottleneck at higher settings, as evidenced by the steep FPS drops when moving from Low to Ultra. At 1080p, the average FPS falls from 123.1 on Low to 51.6 on Ultra, a 71.5 FPS difference that is almost entirely attributable to the GPU's shading units and memory subsystem being saturated by the increased graphical load.

The 6 GB VRAM capacity is a critical factor in Rust. The game's open-world environments with complex textures and draw distances can quickly consume memory. The benchmark results indicate that at 4K Ultra, the combo manages only 20.5 FPS, suggesting that the RTX 2060 is not only compute-bound but also potentially hitting memory capacity limits, forcing the engine to swap assets. In contrast, the Low preset at 4K yields 52.6 FPS, indicating that reducing texture quality and effects alleviates the memory pressure and allows the GPU to focus on rendering geometry. The GPU's 30 RT cores and 240 tensor cores are present, but Rust does not heavily utilize ray tracing, so their impact on these results is minimal; the traditional rasterization performance is what drives these numbers.

How This Combo Ranks

This pairing of the Ryzen 5 5600GT and RTX 2060 sits at rank 1413 out of 1717 combos tested in Rust. This places it in the 18th percentile of all tested systems, meaning it outperforms roughly 18% of configurations. The ranking reflects a mid-range GPU paired with a mid-range CPU, and the data implies that this is not a top-tier combination for Rust, especially at higher resolutions.

The CPU itself, the Ryzen 5 5600GT, has a percentile vs all CPUs of 78, which is quite high, but the GPU's percentile vs all GPUs is only 58. This discrepancy suggests the GPU is the limiting factor in this combo's overall rank. The GPU's nearest rival, the AMD Radeon RX 7600S, has an average benchmark score that is 0.5% higher, while the AMD Radeon Pro 5600M and Pro 5700 are 1.7% higher. These small deltas indicate that the RTX 2060 is competitive with its direct peers, but none of these are high-end parts. The combo rank is a function of this GPU's mid-pack performance, and the measured FPS data confirms that it cannot consistently drive high refresh rates at demanding settings.

Measured FPS Breakdown

Across all resolutions, the Low preset is the standout performer. At 1080p Low, the combo reaches 123.1 FPS average. At 1440p Low, it drops to 84.4 FPS, and at 4K Low, it falls to 52.6 FPS. The Medium preset shows a significant step down: 86.1 FPS at 1080p, 60.3 FPS at 1440p, and 33.7 FPS at 4K. The High preset continues the decline with 73.6 FPS at 1080p, 46.5 FPS at 1440p, and 26.8 FPS at 4K. Finally, the Ultra preset is the most demanding, yielding 51.6 FPS at 1080p, 38 FPS at 1440p, and 20.5 FPS at 4K.

The data shows a clear linear progression where each settings tier costs roughly 15-20% performance at the same resolution. For instance, at 1440p, going from Medium to High drops the average from 60.3 to 46.5 FPS, which is a 13.8 FPS reduction. This consistency suggests that the game's settings scale predictably, and the RTX 2060's architecture handles the increased load uniformly across the presets. The min and max FPS values are not provided, so an analysis of frame time variance is not possible from this data, but the averages alone indicate that only the Low preset provides a consistently high frame rate experience.

Resolution Scaling

The performance drop from 1080p to 4K is steep and reveals the bottleneck. At Low settings, the average FPS falls from 123.1 at 1080p to 52.6 at 4K, a 57.3% reduction. At Medium settings, it falls from 86.1 to 33.7, a 60.9% reduction. At High settings, the drop is from 73.6 to 26.8, a 63.6% reduction, and at Ultra, it goes from 51.6 to 20.5, a 60.3% reduction.

These percentages are remarkably consistent across settings, hovering around 60%. This consistency indicates that the scaling is primarily resolution-driven, not settings-driven. The GPU is rendering roughly four times the pixels at 4K compared to 1080p, and the frame rate drops accordingly. The CPU, with 6 cores and 12 threads, is likely not the limiting factor here. The Ryzen 5 5600GT's boost clock of 4.60 GHz is sufficient to feed the GPU at lower resolutions, but as the pixel count increases, the GPU's shading units and memory bandwidth become the ceiling. The fact that the FPS drop is similar across all presets suggests that the GPU is hitting its raw throughput limit at 4K, regardless of how much load the settings add. The 1440p results sit roughly halfway between 1080p and 4K in terms of FPS, further confirming that pixel count is the primary driver of performance degradation for this combo.

FAQ

Q: What is the best settings preset for 1080p gaming with this combo?

A: The Low preset delivers the highest average FPS at 123.1, making it ideal for high-refresh-rate monitors. For a balance of visuals and performance, the Medium preset offers 86.1 FPS, while High and Ultra drop to 73.6 and 51.6 FPS, respectively.

Q: Can this combo handle 1440p gaming?

A: Yes, but with limitations. At 1440p, the Low preset achieves 84.4 FPS, and Medium hits 60.3 FPS. High and Ultra presets fall below 47 FPS, which may not be smooth enough for fast-paced gameplay.

Q: How does the RTX 2060 compare to its nearest rivals?

A: The RTX 2060 has an average benchmark score that is 0.5% lower than the AMD Radeon RX 7600S and 1.7% lower than the AMD Radeon Pro 5600M and Pro 5700, indicating very similar performance levels.

Q: Is 6 GB of VRAM enough for Rust?

A: The data suggests it is sufficient for Low and Medium settings, with 52.6 FPS at 4K Low. However, at 4K Ultra, the average FPS drops to 20.5, indicating that the VRAM capacity or bandwidth is likely a limiting factor at high resolutions and settings.

Q: What is the combo's overall rank in the database?

A: This configuration is ranked 1413 out of 1717 tested combos for Rust, placing it in the lower portion of the performance spectrum.

Q: Which component is the bottleneck?

A: The GPU is the primary bottleneck. The CPU has a high percentile rank of 78, while the GPU sits at 58. The FPS scaling from 1080p to 4K shows a consistent ~60% drop, indicating the GPU's rendering capabilities are the ceiling.

CPU Role

The AMD Ryzen 5 5600GT is a 6-core, 12-thread processor based on the Zen 3 architecture, with a base clock of 3.60 GHz and a boost clock of 4.60 GHz. It has a 16 MB L3 cache and supports DDR4 memory. The CPU's benchmark scores show strong multi-threaded performance, with a Cinebench R23 multicore score of 17272 and a single-core score of 2438. Its average benchmark score is 20740, placing it at the 78th percentile of all CPUs.

In Rust, the CPU's role is to handle game logic, entity updates, and physics calculations. The data indicates that this CPU is not the limiting factor in most scenarios. At 1080p Low, the combo achieves 123.1 FPS, which is high enough to suggest the CPU is keeping up with the GPU's output. The CPU's nearest rival, the Intel Core i7-10700, has a nearly identical average score with a delta of 0%, while the AMD Ryzen 5 5600X is just 0.3% higher. This places the 5600GT in strong company for gaming workloads.

However, the CPU's performance becomes less relevant as resolution increases. At 4K, the GPU is clearly the bottleneck, as the FPS drops are uniform across settings. The CPU's 12 threads are sufficient to handle Rust's multi-threaded nature, and the high boost clock ensures responsive single-thread performance. The 65W TDP suggests thermal headroom is not a concern, allowing sustained boost clocks. In this combo, the CPU provides a solid foundation, but its potential is capped by the RTX 2060's mid-range capabilities. If paired with a stronger GPU, the 5600GT would likely be able to push higher frame rates, but with this GPU, the CPU is rarely the constraint.