Rust

The AMD Ryzen 5 5600F paired with the AMD Radeon RX 7600 delivers a playable but demanding experience in Rust, with performance scaling that clearly shifts the bottleneck between the CPU and GPU depending on the resolution and settings. Measured data for this combo places it at rank 2044 out of 2953 tested combinations, indicating that while the pairing is functional, it sits in the lower half of the database for this title.

Resolution Scaling

The FPS drop from 1080p to 4K reveals a classic transition from a CPU-bound scenario at lower resolutions to a GPU-bound one at higher resolutions. At 1080p Low settings, the combo produces 138 FPS, but this falls to 95 FPS at 1440p Low and 56 FPS at 4K Low. The scaling from 1080p to 1440p represents a 31% reduction in frame rate, while the drop from 1440p to 4K is a further 41% reduction. This progressive deceleration indicates that the RX 7600 begins to struggle as pixel count increases, even with the relatively light Low preset.

At Medium settings, the pattern is similar but the absolute numbers are lower. The 1080p Medium result of 93 FPS drops to 64 FPS at 1440p Medium (a 31% decrease) and then to 38 FPS at 4K Medium (a 41% decrease from 1440p). The consistency of these percentage drops across Low and Medium presets suggests that the scaling behavior is primarily driven by resolution rather than by the specific settings applied.

The High preset shows a steeper initial drop. From 78 FPS at 1080p High, the frame rate falls to 54 FPS at 1440p High, a reduction of 31%, but then drops further to 32 FPS at 4K High, which is a 41% decline from 1440p. The Ultra preset follows the same relative pattern, with 60 FPS at 1080p, 41 FPS at 1440p, and 24 FPS at 4K, representing a 32% and 41% drop respectively. The consistent 41% reduction from 1440p to 4K across all settings strongly indicates that the GPU becomes the limiting component at 4K, regardless of the visual fidelity selected.

The data suggests that at 1080p, the Ryzen 5 5600F with its six cores and twelve threads is capable of feeding the RX 7600 adequately, as evidenced by the 138 FPS Low result. However, the scaling to 1440p and 4K shows that the GPU's 128-bit memory bus and 8 GB of GDDR6 memory become the primary constraint. The 4K results, particularly the 24 FPS Ultra figure, are below the threshold for smooth gameplay, indicating that this resolution is not viable for this combo in Rust without significant graphical compromises.

Settings Recommendations

The measured rows provide a clear picture of which preset offers the best balance of visual quality and frame rate for this combo. At 1080p, the Medium preset delivers 93 FPS average with a minimum of 79 FPS and a maximum of 107 FPS. This is a substantial improvement over the High preset's 78 FPS, and the minimum frame rate of 79 FPS remains above the 60 FPS threshold that most players consider acceptable for a survival game. The Low preset at 1080p yields 138 FPS, which is excellent for competitive play, but the visual downgrade is significant given that Rust's environment is a core part of the gameplay experience.

For 1440p, the Medium preset produces 64 FPS average with a minimum of 54 FPS and a maximum of 73 FPS. This is the only preset at 1440p that stays above the 60 FPS average mark, making it the recommended choice for users with 1440p monitors. The High preset at 1440p drops to 54 FPS, which is borderline for smooth play, while the Low preset at 95 FPS is smooth but sacrifices too much visual detail for a game where spotting enemies in the environment is critical.

At 4K, no preset achieves a playable average frame rate. The best 4K result is the Low preset at 56 FPS, which is technically above 30 FPS but below the 60 FPS target. The Medium preset at 4K yields 38 FPS, and the High preset drops to 32 FPS. The Ultra preset at 4K produces just 24 FPS, which is not viable for any real gameplay. Given these results, the data suggests that this combo is best suited for 1080p Medium or 1440p Medium, with the 1080p Medium preset providing the most consistent experience with a minimum frame rate of 79 FPS and a maximum of 107 FPS.

The choice between 1080p Medium and 1440p Medium depends on the user's priority. If frame rate consistency is paramount, the 1080p Medium preset with its 93 FPS average and tight 79-107 FPS range is the safest option. For users who prefer higher resolution, the 1440p Medium preset at 64 FPS average with a 54 FPS minimum is acceptable, though it will experience more noticeable frame dips during intense moments.

How This Combo Ranks

This combination of the AMD Ryzen 5 5600F and AMD Radeon RX 7600 ranks 2044 out of 2953 tested combos in Rust, placing it in the 31st percentile of all configurations in the database. This ranking indicates that the pairing is below average for this specific game, which is notable given the individual component benchmarks. The CPU has a Passmark multi-thread score of 19236 and a single-thread score of 2872, placing it in the 85th percentile of all CPUs, while the GPU has a Passmark G3D score of 16634 and sits in the 57th percentile of all GPUs.

The discrepancy between the component-level percentiles and the combo's overall rank in Rust suggests that the game is particularly demanding on the GPU, and the RX 7600's mid-range positioning holds the combo back. The CPU's nearest rivals include the Intel Core Ultra 5 225 with an average score of 36938, the AMD Ryzen 5 5500X3D at 37018, and the AMD Ryzen AI 7 PRO 450 at 37093, all within 0.5% of the 5600F's average score of 36945. This indicates that the CPU performance is competitive with its peers, but the GPU's nearest rivals tell a different story.

The RX 7600's nearest rivals include the NVIDIA GeForce RTX 3050 OEM with an average score of 15199, the AMD Radeon Pro 560X at 15082, and the AMD Radeon 680M at 15270. The RX 7600's average benchmark score is 15171, which is 0.2% lower than the RTX 3050 OEM and 0.7% lower than the Radeon 680M. This tight grouping suggests that the GPU is at the lower end of its performance class, and this directly impacts the combo's ranking in a game like Rust that appears to favor stronger GPUs.

The combo rank of 2044 out of 2953 means that roughly 69% of tested combinations perform better in Rust. This is a significant finding for users considering this pairing, as it indicates that while the individual components are capable, the combination does not synergize well for this particular title. The data implies that users would need to either upgrade the GPU to move up the rankings or accept lower settings to achieve playable frame rates.

Measured FPS Breakdown

At 1920x1080, the combo demonstrates its best performance across all settings. The Low preset achieves 138 FPS average, which is the highest measured result in the entire dataset. The Medium preset produces 93 FPS average with a minimum of 79 FPS and a maximum of 107 FPS, providing a solid range for gameplay. The High preset delivers 78 FPS average, while the Ultra preset drops to 60 FPS average. The progression from Low to Ultra at 1080p shows a 56% reduction in frame rate, from 138 FPS to 60 FPS, which illustrates the significant cost of the Ultra preset's visual enhancements.

At 2560x1440, the performance drops are consistent across all settings. The Low preset yields 95 FPS average, which is still smooth for most users. The Medium preset produces 64 FPS average with a minimum of 54 FPS and a maximum of 73 FPS, making it the only 1440p setting that maintains an average above 60 FPS. The High preset falls to 54 FPS average, and the Ultra preset drops to 41 FPS average. The reduction from 1080p to 1440p is approximately 31% for each setting, indicating a proportional scaling that is consistent with the increase in pixel count.

At 3840x2160, the combo struggles to maintain playable frame rates. The Low preset achieves 56 FPS average, which is below the 60 FPS target but technically playable. The Medium preset drops to 38 FPS average with a minimum of 32 FPS and a maximum of 43 FPS, while the High preset falls to 32 FPS average. The Ultra preset produces just 24 FPS average, which is not suitable for any interactive gameplay. The 4K results show a 32% reduction from 1440p for Low, 41% for Medium, 41% for High, and 41% for Ultra, with the larger drops at higher presets indicating that the GPU is overwhelmed by the combination of high resolution and complex rendering.

The minimum frame rate data is only provided for the Medium preset at each resolution. At 1080p Medium, the minimum is 79 FPS, at 1440p Medium it is 54 FPS, and at 4K Medium it is 32 FPS. These values suggest that the Medium preset provides the most predictable performance, with the minimum frame rate staying within 15% of the average at 1080p and 1440p, but falling to 16% below the average at 4K.

GPU Role

The AMD Radeon RX 7600 is built on the RDNA 3.0 architecture with the Navi 33 chip, manufactured on a 6 nm process at TSMC. The GPU features 2048 shading units, 128 texture mapping units, and 64 render output units, with 32 ray tracing cores. The clock speeds are set to a base of 1720 MHz, a game frequency of 2250 MHz, and a boost clock of 2655 MHz. The memory configuration consists of 8 GB of GDDR6 on a 128-bit bus, providing a bandwidth of 288.0 GB/s.

In Rust, the GPU's memory bandwidth and capacity play a critical role in the 4K performance degradation. The 8 GB of VRAM is likely sufficient for 1080p and 1440p, but the 4K results at High and Ultra settings show severe frame rate drops that suggest memory pressure. The 128-bit bus width limits the memory bandwidth to 288.0 GB/s, which is modest for a modern GPU and likely contributes to the 41% performance drop from 1440p to 4K across all settings.

The GPU's texture rate of 339.8 GTexel/s and pixel rate of 169.9 GPixel/s are adequate for 1080p and 1440p, but the FP32 performance of 21.75 TFLOPS is not sufficient to maintain high frame rates at 4K with complex shading. The Passmark G3D score of 16634 places the GPU in the 57th percentile of all GPUs, and its average benchmark score of 15171 is comparable to the NVIDIA GeForce RTX 3050 OEM, which scores 15199 and has a delta of -0.2%. This close grouping indicates that the RX 7600 is at the lower end of its performance tier.

The GPU's clock behavior is notable, with a boost clock of 2655 MHz that is significantly higher than the base clock of 1720 MHz. The game clock of 2250 MHz represents the typical sustained frequency during gaming workloads. The measured FPS data suggests that the GPU maintains higher clocks at lower resolutions but is likely throttled or limited by other factors at 4K, as evidenced by the disproportionate performance drop when moving from 1440p to 4K.

CPU Role

The AMD Ryzen 5 5600F is a six-core, twelve-thread processor based on the Zen 3 architecture, codenamed Vermeer, and manufactured on a 7 nm process at TSMC. The base clock is 3.00 GHz with a boost clock of 4.00 GHz, and the CPU has a 32 MB shared L3 cache. The memory support is DDR4 with a dual-channel interface, providing a memory bandwidth of 51.2 GB/s.

In Rust, the CPU's role is primarily evident at 1080p, where the frame rates are highest. The 138 FPS result at 1080p Low indicates that the CPU is capable of driving high frame rates without being a bottleneck at this resolution. The Passmark single-thread score of 2872 and multi-thread score of 19236 suggest that the CPU has solid per-core performance, which is important for a game like Rust that may rely on single-threaded physics and world simulation.

The CPU's performance relative to its rivals shows that it is competitive. The Intel Core Ultra 5 225 has an average score of 36938, which is essentially identical to the 5600F's score of 36945, with a delta of 0%. The AMD Ryzen 5 5500X3D scores 37018, just 0.2% higher, and the AMD Ryzen AI 7 PRO 450 scores 37093, 0.4% higher. This grouping indicates that the CPU is not the limiting factor in this combo's Rust performance.

The CPU's 65 W TDP and 7 nm process node contribute to its efficiency, but the data shows that the CPU is not the primary constraint in Rust. The scaling from 1080p to 4K shows that the frame rate drops are consistent regardless of CPU load, which suggests that the GPU is the limiting component at higher resolutions. At 1080p, the CPU's performance is sufficient to avoid bottlenecking the GPU, as evidenced by the 138 FPS Low result, which is higher than what the GPU could deliver at 1440p or 4K.

The CPU's L3 cache of 32 MB is shared across all six cores, which can be beneficial for games that use shared data structures. The Passmark data compression score of 232836 and integer math score of 59339 indicate strong computational throughput, but these metrics are less relevant to gaming performance than the single-thread and physics scores. The Passmark physics score of 1043 is moderate, suggesting that the CPU can handle basic physics calculations without issue, but it may not be optimized for the most demanding simulation scenarios in Rust.