Roblox

Roblox is a sandbox title with a distinctive performance profile, and this specific pairing of an Intel Core Ultra 9 290K Plus and an NVIDIA GeForce RTX 3080 Ti produces remarkably high frame rates across all tested configurations. The data shows a system that is overwhelmingly capable of running the game far beyond typical display refresh rates, with the primary performance variable being the graphics settings preset rather than the resolution. This analysis breaks down the measured FPS data, contextualizes the component roles, and provides actionable settings guidance based strictly on the provided benchmark results.

Resolution Scaling

The measured FPS data reveals an unusual scaling pattern that is critical to understanding this game’s bottlenecks. At 1920x1080 with Low settings, the combo achieves 500 FPS. Moving to 2560x1440 Low drops that to 334 FPS, a reduction of 166 FPS (33.2%). At 3840x2160 Low, the average falls further to 189 FPS, which is 311 FPS lower than the 1080p result, representing a 62.2% decrease from the baseline. This steep decline indicates that even at Low settings, the GPU is becoming the limiting factor as pixel count increases, though the absolute numbers remain exceptionally high.

The scaling pattern shifts when examining the Medium settings preset. At 1080p Medium, the average is 455 FPS, which drops to 304 FPS at 1440p (a 33.2% reduction) and then to 172 FPS at 4K (a 62.2% reduction from 1440p). This consistent proportional drop across resolutions for the same settings suggests that the rendering workload scales predictably with pixel count, which is a hallmark of GPU-bound scenarios in this specific configuration. The frame time data for Medium settings shows the 4K run has a minimum of 146 FPS and a maximum of 197 FPS, indicating some variance but no catastrophic frame drops.

The Ultra preset exhibits the most dramatic scaling. At 1080p Ultra, the average is 326 FPS. At 1440p Ultra, it falls to 218 FPS (a 33.1% drop), and at 4K Ultra, it plummets to 123 FPS (a 43.6% drop from 1440p). The percentage drop from 1440p to 4K at Ultra is larger than the drop from 1080p to 1440p, suggesting that the Ultra preset’s additional graphical effects become disproportionately expensive at higher pixel counts. This points to the GPU’s shading units and memory bandwidth being pushed harder by the combination of high resolution and high settings.

The data indicates that the CPU is not the primary bottleneck at any tested resolution. The Intel Core Ultra 9 290K Plus, with its 24 cores and 24 threads, provides sufficient headroom that even at 1080p Low, where the GPU has the least work, the system still delivers 500 FPS. The fact that the FPS scales down consistently as resolution increases across all settings presets confirms that the RTX 3080 Ti’s rendering pipeline is the limiting component. The game’s relatively simple geometry and lighting, typical of sandbox titles, allows the CPU to feed frames rapidly without becoming a constraint.

FAQ

Q: What is the highest average frame rate recorded for this combo in Roblox?

A: The highest average FPS recorded is 500, achieved at 1920x1080 resolution with Low settings. This represents the ceiling of the measured data and indicates the system is far from stressed at this configuration.

Q: How does the 4K Ultra performance compare to the 1080p Low performance?

A: At 4K Ultra, the average FPS is 123, while at 1080p Low, it is 500. This represents a 75.4% reduction in frame rate from the lowest resolution/settings combination to the highest, showing a substantial performance cost for enabling maximum visual quality at 4K.

Q: Is there a measurable frame rate difference between Low and Medium settings at 1440p?

A: Yes. At 2560x1440, Low settings produce an average of 334 FPS, while Medium settings produce 304 FPS. The difference is 30 FPS, or approximately 9%. This is a relatively small gap, suggesting that the Medium preset does not introduce a significant additional GPU load over Low at this resolution.

Q: What are the minimum and maximum FPS values recorded for the 4K Medium configuration?

A: The 4K Medium configuration has a minimum FPS of 146 and a maximum FPS of 197, with an average of 172. The spread of 51 FPS between min and max indicates some frame time variance, but the minimum remains well above typical display refresh rates.

Q: Does the combo’s rank in the game’s benchmark database change the interpretation of the FPS data?

A: The comboRankInGame places this pairing at 766 out of 3010 tested combos, which is in the top 25.4% of all tested configurations. While this rank is useful for relative positioning, the absolute FPS numbers show the system is capable of delivering smooth gameplay at all tested settings and resolutions.

Q: Which resolution and settings combination yields the highest minimum FPS in the measured data?

A: The highest minimum FPS recorded is 387, which occurs at 1920x1080 with Medium settings. This is the only configuration in the data with a minimum FPS above 300, indicating a very stable frame delivery at this setting.

GPU Role

The NVIDIA GeForce RTX 3080 Ti is the central component in determining this game’s performance envelope. With 12 GB of GDDR6X memory on a 384-bit bus, the card provides 912.4 GB/s of memory bandwidth, which is ample for Roblox’s texture and geometry demands at any tested resolution. The GPU’s 10,240 shading units and 80 RT cores are not heavily taxed by this sandbox title, but the data shows that resolution scaling still impacts performance significantly, indicating that pixel throughput is the primary GPU workload.

The card’s clock speeds are specified at a base of 1365 MHz and a boost of 1665 MHz. These clocks, combined with the 34.10 TFLOPS FP32 compute rate, deliver sufficient raw processing power to achieve the high frame rates observed. The measured data shows that at 4K Ultra, the average FPS drops to 123, which is the lowest recorded. This suggests that the Ultra preset likely enables effects that increase the per-pixel work, pushing the GPU closer to its limits even with its high memory bandwidth and compute capabilities.

The RTX 3080 Ti’s position in the broader market is reflected in its percentileVsAllGpus score of 83, meaning it outperforms 83% of all GPUs in the benchmark database. Its nearest rivals include the NVIDIA GeForce RTX 5070, which is 2% ahead in average benchmark score, and the AMD Radeon Pro 5300, which is 0.8% behind. This relative positioning indicates that the 3080 Ti remains a competitive high-end GPU, though it is not at the very top of the current hierarchy. In Roblox specifically, the GPU’s performance is sufficient to maintain high frame rates, but the data shows that the 4K Ultra setting is where the card’s limitations become apparent.

The GPU’s memory configuration is particularly relevant for Roblox, which can have large texture sets in user-generated content. The 12 GB capacity is unlikely to be exceeded at these resolutions, and the high bandwidth ensures that any texture streaming is handled without stutter. The measured minimum FPS of 146 at 4K Medium, while lower than the average, still demonstrates that the memory subsystem can keep up with demand without causing severe frame drops.

Measured FPS Breakdown

The benchmark data provides a complete matrix of average FPS across three resolutions and four settings presets. At 1920x1080, the Low preset delivers 500 FPS, which is the highest score in the entire dataset. The Medium preset at 1080p yields 455 FPS, with a minimum of 387 and a maximum of 523. The High preset drops to 402 FPS, and the Ultra preset falls to 326 FPS. This progression from Low to Ultra at 1080p shows a 34.8% reduction in frame rate, indicating that the Ultra preset imposes a significant additional load over Low.

Moving to 2560x1440, the Low preset still delivers a very high 334 FPS. The Medium preset produces 304 FPS, with a minimum of 258 and a maximum of 349. The High preset averages 268 FPS, and the Ultra preset averages 218 FPS. The drop from Low to Ultra at this resolution is 116 FPS, or 34.7%, which is nearly identical to the percentage drop at 1080p. This consistency suggests that the relative cost of the Ultra preset scales linearly with resolution, reinforcing the GPU-bound nature of the workload.

At 3840x2160, the Low preset averages 189 FPS. The Medium preset produces 172 FPS, with a minimum of 146 and a maximum of 197. The High preset averages 152 FPS, and the Ultra preset averages 123 FPS. The gap between Low and Ultra at 4K is 66 FPS, or 34.9%, which again matches the percentage reduction seen at lower resolutions. This data indicates that the performance characteristics are highly predictable: each settings tier costs roughly the same percentage of performance regardless of resolution.

The variance between minimum and maximum FPS, where available, provides insight into frame pacing. At 1080p Medium, the min/max spread is 136 FPS (387 to 523), which is relatively wide but still maintains a high floor. At 1440p Medium, the spread narrows to 91 FPS (258 to 349). At 4K Medium, the spread is 51 FPS (146 to 197). This trend shows that as resolution increases, the frame rate becomes more consistent, likely because the GPU is more uniformly saturated and less prone to brief bursts of higher performance.

How This Combo Ranks

The comboRankInGame field places this specific pairing at rank 766 out of 3010 tested combinations in Roblox. This puts the system in the 74.6th percentile of all tested combos, meaning it outperforms roughly three-quarters of the configurations in the database. Given the absolute FPS numbers measured, this rank is likely constrained by other systems with even more powerful GPUs or configurations that are more optimized for this specific game engine.

The CPU’s own ranking provides context for its contribution. The Intel Core Ultra 9 290K Plus has a percentileVsAllCpus score of 96, indicating it is in the top 4% of all CPUs in the benchmark database. Its average benchmark score of 84003 places it just 0.2% ahead of the Intel Core Ultra 9 285K and 1.1% ahead of the AMD EPYC 4584PX. This high CPU ranking, combined with the GPU’s 83rd percentile ranking, suggests that the overall combo rank is pulled down by the GPU not being at the absolute top of its class.

The GPU’s nearest rivals in the database include the NVIDIA GeForce RTX 5070, which is 2% ahead in average score, and the AMD Radeon Pro 5300, which is 0.8% behind. The RTX 3080 Ti’s average benchmark score of 41187 is close to these competitors, indicating that its performance in Roblox is broadly in line with its general compute capabilities. The combo’s rank of 766 out of 3010 is consistent with a high-end CPU paired with a strong but not top-tier GPU.

It is worth remembering the rank is specific to Roblox and may not translate to other games. The data shows that this combo achieves frame rates well above the refresh rates of most monitors, so the practical experience is likely smooth regardless of the rank. The rank serves as a relative indicator for comparing against other tested systems, but the measured FPS data is the more actionable metric for understanding actual gameplay performance.

CPU Role

The Intel Core Ultra 9 290K Plus is a 24-core, 24-thread processor based on the Arrow Lake Refresh architecture, built on a 3 nm process from TSMC. Its base clock is 3.70 GHz with a boost clock of 5.80 GHz, and it has 36 MB of shared L3 cache. In Roblox, the CPU’s role is to handle game logic, physics, and the rendering thread, but the measured data shows that it is not the limiting factor at any tested configuration.

The CPU’s benchmark scores indicate exceptional single-threaded and multi-threaded performance. Its Cinebench R23 multi-core score is 51731, and its single-core score is 7303. These scores, combined with its PassMark single-thread score of 4823, demonstrate that the CPU can handle the game’s main thread without bottlenecking the GPU. The fact that the system achieves 500 FPS at 1080p Low, where CPU overhead per frame is highest relative to GPU workload, confirms that the CPU has ample headroom.

The CPU’s nearest rivals in the benchmark database include the Intel Core Ultra 9 285K, which is just 0.2% behind in average score, and the AMD EPYC 7F72, which is 1.3% ahead. These small deltas suggest that the 290K Plus is at the top of the consumer CPU performance curve. In Roblox, the CPU’s 24 cores and 24 threads are more than sufficient for the game’s demands, and the memory bandwidth of 115.2 GB/s (dual-channel DDR5) is adequate for feeding the GPU with data.

The data does not show any CPU-related dips in performance. Even at the lowest resolution and settings, where the GPU has the least work, the frame rate remains high, indicating that the CPU can sustain the frame generation rate necessary for 500 FPS. The CPU’s high boost clock of 5.80 GHz likely helps in maintaining low frame times in the game’s main loop, which is critical for high-refresh-rate gameplay.

Settings Recommendations

Based strictly on the measured FPS data, the optimal configuration depends on the target refresh rate and resolution. For a 60 Hz display, any tested resolution and settings combination provides more than enough performance, as the lowest recorded average is 123 FPS at 4K Ultra. For 144 Hz displays, the 4K Ultra preset at 123 FPS falls short, but the 4K High preset at 152 FPS and the 4K Medium preset at 172 FPS both exceed the target. The 4K Low preset at 189 FPS provides even more headroom.

For 240 Hz displays, the 1440p Ultra preset at 218 FPS is just below the target, while the 1440p High preset at 268 FPS and the 1440p Medium preset at 304 FPS comfortably exceed it. At 1080p, all settings presets exceed 240 FPS, with the Ultra preset at 326 FPS being the lowest. This suggests that for high-refresh-rate 1080p gaming, the Ultra preset is viable without sacrificing the refresh rate target.

For the best balance of visual quality and frame rate stability, the Medium preset at 1440p appears to be a strong choice. It delivers 304 FPS average with a minimum of 258 FPS, which ensures that even in demanding scenes, the frame rate stays above 240 FPS. The 4K Medium preset at 172 FPS average with a 146 FPS minimum is also a solid option for those prioritizing resolution over frame rate, as it maintains a consistent experience above 144 FPS.

The Ultra preset is only recommended for 1080p or 1440p displays with refresh rates up to 240 Hz, as the 4K Ultra performance at 123 FPS may result in visible frame pacing issues on high-refresh-rate monitors. The data shows that the performance difference between Medium and High is relatively small (e.g., 304 vs 268 FPS at 1440p), so selecting High over Medium does not provide a significant visual benefit for the small frame rate cost. In summary, the Medium preset offers the best measured combination of high average FPS, high minimum FPS, and presumably improved visual fidelity over Low, making it the recommended starting point for most users.