Roblox
This combination delivers exceptional performance with an average of 125 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 54 | 66 | 75 | 82 |
| 1440p QHD | 95 | 117 | 132 | 145 |
| 1080p Full HD | 142 | 175 | 198 | 217 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Roblox with Intel Core i7-13700K + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
The Intel Core i7-13700K paired with the NVIDIA GeForce RTX 3050 4 GB delivers a performance curve in Roblox that is heavily dictated by the graphics card. The data shows a clear and consistent drop in average FPS as resolution increases, moving from a state of high fluidity at 1080p to playable but noticeably reduced performance at 4K. This scaling pattern indicates that while the CPU is more than capable of feeding frames, the RTX 3050 becomes the limiting factor as pixel count rises, particularly at the Ultra preset.
Resolution Scaling
The measured FPS data shows a predictable decline as resolution scales up from 1920x1080 to 3840x2160. At the High settings preset, the average frame rate drops from 175 FPS at 1080p to 117 FPS at 1440p, and finally to 66 FPS at 4K. This represents a substantial 62% reduction in average FPS from the lowest to the highest resolution tested. The pattern is consistent across all settings presets, confirming that the performance penalty is tied directly to the increase in rendered pixels rather than a specific configuration.
The scaling behavior reveals that the RTX 3050 4 GB is the primary bottleneck at higher resolutions. At 1080p, the average FPS figures are high enough that the CPU's 16 cores and 24 threads are likely keeping pace with the GPU's output. However, the 4K results show a more compressed range between the Low and Ultra presets, with average FPS spanning from 82 down to 54. This compression suggests that the GPU is saturated at 4K, and the differences between settings have a smaller relative impact on performance than they do at 1080p.
For a game like Roblox, the drop from 175 FPS at 1080p High to 66 FPS at 4K High is significant, but the 4K figure remains playable. The data indicates that 1440p offers a strong balance, with the High preset delivering 117 FPS. The scaling from 1440p to 4K is a steep 44% performance hit, while the scaling from 1080p to 1440p is a 33% hit, showing that the cost of pushing to 4K is disproportionately high relative to the resolution increase.
CPU Role
The Intel Core i7-13700K is a Raptor Lake-S architecture processor with 16 cores and 24 threads. Its benchmark results show exceptional multi-threaded capability, with a Cinebench R23 multicore score of 30745 and a Geekbench multicore score of 19429. These figures place the CPU in the 89th percentile of all CPUs, indicating that it is a top-tier performer for productivity and gaming workloads alike.
In the context of Roblox, the CPU's role is to handle game logic, physics, and draw calls. The single-thread performance is also strong, with a Cinebench R23 single-core score of 2116 and a Passmark single-thread score of 4333. While Roblox is not typically a heavily threaded title, the combination of high single-thread speed and a massive 30 MB of shared L3 cache ensures that the CPU is unlikely to be a limiting factor in most scenarios.
The benchmark data shows that the CPU's average benchmark score of 46881 is nearly identical to its nearest rivals. It trails the AMD Ryzen 9 5900 by a mere 0.2% and the AMD Ryzen AI 9 HX PRO 375 by 0.3%, while leading the AMD Ryzen 9 7845HX and Intel Xeon w3-2535 by 0.5% each. This tight grouping suggests that for Roblox, any of these CPUs would deliver similar performance, and the choice between them would come down to other factors like platform features.
At 1080p, the measured FPS figures are high enough to suggest that the CPU is providing ample headroom. The 217 FPS average at Low settings and 175 FPS at High settings are likely near the limit of what the GPU can output, even at lower resolutions. As resolution increases, the CPU's influence diminishes, and the GPU becomes the dominant factor in determining final frame rates.
Settings Recommendations
The measured data provides clear guidance on which settings preset offers the best experience for the RTX 3050 4 GB. At 1920x1080, the Medium preset delivers an average of 198 FPS with a minimum of 168 FPS and a maximum of 227 FPS. This is a strong result that balances visual quality with high refresh rate performance. The High preset at 1080p drops to 175 FPS, which is still excellent, while the Ultra preset falls to 142 FPS.
At 2560x1440, the Medium preset again provides the most balanced experience, with an average of 132 FPS, a minimum of 112 FPS, and a maximum of 152 FPS. The High preset at this resolution delivers 117 FPS, which is also good for a 1440p display. The Ultra preset drops to 95 FPS, which is still playable but begins to show the GPU's limitations.
For 4K, the choices are more constrained. The Low preset at 3840x2160 delivers an average of 82 FPS, which is the only preset to maintain a comfortable frame rate above the 60 FPS threshold. The Medium preset offers 75 FPS with a minimum of 63 FPS, which is also viable. The High preset at 66 FPS and Ultra at 54 FPS are more demanding, and the Ultra setting specifically dips below the ideal threshold for smooth gameplay.
The recommendation from the data is to use the Medium preset for the best overall experience across all resolutions. At 1080p and 1440p, it provides the highest minimum frame rates, ensuring smoother performance during complex scenes. At 4K, the Medium preset remains playable, while the Low preset offers a safer margin for frame rate stability.
FAQ
Q: What is the best resolution to use with this CPU and GPU combo for Roblox?
A: The data shows that 2560x1440 offers a strong balance between visual fidelity and performance. The Medium preset at 1440p delivers an average of 132 FPS with a minimum of 112 FPS, which is suitable for high refresh rate displays without the significant performance cost of 4K.
Q: How does the RTX 3050 4 GB perform at 4K in Roblox?
A: At 3840x2160, the average FPS ranges from 82 on Low settings to 54 on Ultra settings. The Medium preset provides an average of 75 FPS with a minimum of 63 FPS, which is the recommended setting for 4K if you want to maintain smooth gameplay.
Q: Is the Intel Core i7-13700K overkill for Roblox?
A: The CPU's benchmark scores are very high, placing it in the 89th percentile of all CPUs. However, the measured FPS data suggests that the GPU is the limiting factor at higher resolutions. The CPU's strong single-thread score of 2116 in Cinebench R23 ensures it handles the game's logic without bottlenecking the GPU.
Q: Does the Ultra preset provide a meaningful improvement over High?
A: The data shows that the Ultra preset consistently delivers lower average FPS than High at every resolution. At 1080p, Ultra averages 142 FPS compared to 175 FPS on High. The visual improvement may not justify the performance drop, especially at higher resolutions.
Q: What is the expected frame rate at 1080p with Medium settings?
A: The measured data shows an average of 198 FPS with a minimum of 168 FPS and a maximum of 227 FPS. This is the highest performing preset at 1080p, offering a significant margin above the 144 Hz refresh rate common on modern monitors.
Q: How does this combo rank among other hardware combinations for Roblox?
A: The combination is ranked 3233 out of 3711 tested combos for Roblox. This places it in the lower portion of the rankings, which is consistent with the RTX 3050 4 GB being an entry-level GPU relative to the broader hardware landscape.
GPU Role
The NVIDIA GeForce RTX 3050 4 GB is an Ampere architecture GPU with 2048 shading units and 64 tensor cores. It has a base clock of 1545 MHz and a boost clock of 1740 MHz, with 4 GB of GDDR6 memory on a 128-bit bus providing 192.0 GB/s of bandwidth. The GPU's performance percentile is 50, indicating it sits exactly at the median of all GPUs in the database.
In Roblox, the GPU's role is to render the game's often simple geometry and effects. The 4 GB VRAM capacity is not stressed by Roblox's relatively modest texture requirements, even at 4K resolution. The GPU's 7.127 TFLOPS of FP32 performance is sufficient for the game's graphical workload, but the data shows that the GPU is still the bottleneck at 4K, as evidenced by the significant FPS drop from 1440p.
The GPU's performance at 1080p is excellent, with the Low preset achieving 217 FPS and the Medium preset achieving 198 FPS. These numbers indicate that the GPU is capable of high frame rates when the resolution is moderate. The transition to 1440p shows a reduction, but the Medium preset still delivers 132 FPS, which is strong. The 4K results are the weakest, with the Ultra preset falling to 54 FPS, showing that the GPU's fill rate and memory bandwidth are insufficient for maximum settings at that resolution.
The GPU's 16 RT cores and 64 tensor cores are present, but Roblox does not heavily utilize ray tracing or DLSS features. The data suggests that the GPU's raw rasterization performance is the primary factor in the measured FPS, and its 90 W TDP indicates it is a power-efficient option for a compact build.
Measured FPS Breakdown
At 1920x1080, the measured data shows a clear progression across settings. The Low preset averages 217 FPS, Medium averages 198 FPS with a minimum of 168 FPS and a maximum of 227 FPS, High averages 175 FPS, and Ultra averages 142 FPS. This represents a 35% drop from Low to Ultra, showing that the GPU can handle the highest settings at this resolution but with a notable performance cost.
At 2560x1440, the average FPS figures are lower but still robust. Low settings deliver 145 FPS, Medium delivers 132 FPS with a minimum of 112 FPS and a maximum of 152 FPS, High delivers 117 FPS, and Ultra delivers 95 FPS. The spread from Low to Ultra is 50 FPS, or a 34% reduction, which is a similar relative drop to 1080p.
At 3840x2160, the performance takes a more significant hit. The Low preset averages 82 FPS, Medium averages 75 FPS with a minimum of 63 FPS and a maximum of 86 FPS, High averages 66 FPS, and Ultra averages 54 FPS. The drop from Low to Ultra is 28 FPS, or a 34% reduction, consistent with the other resolutionschers but with absolute numbers that are much lower.
The Medium preset is the only one that provides minimum FPS data across all three resolutions, with 168 FPS at 1080p, 112 FPS at 1440p, and 63 FPS at 4K. This data point is useful for understanding worst-case performance, and it shows that even at 4K, the Medium preset maintains a playable frame rate. The High and Ultra presets lack minimum FPS data, but their averages indicate they are less stable at higher resolutions.
Hardware Specifications
Intel Core i7-13700K
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i7-13700K + NVIDIA GeForce RTX 3050 4 GB in Roblox
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 82.0 |
| 3840x2160 | Medium | 75.0 |
| 3840x2160 | High | 66.0 |
| 3840x2160 | Ultra | 54.0 |
| 2560x1440 | Low | 145.0 |
| 2560x1440 | Medium | 132.0 |
| 2560x1440 | High | 117.0 |
| 2560x1440 | Ultra | 95.0 |
| 1920x1080 | Low | 217.0 |
| 1920x1080 | Medium | 198.0 |
| 1920x1080 | High | 175.0 |
| 1920x1080 | Ultra | 142.0 |
Roblox with RTX 3050 4 GB + Other CPUs
See how Roblox performs with the same GPU but different processors.
Other Games with ii7-13700K + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.