Roblox

The Intel Core i5-12600KF paired with the NVIDIA GeForce RTX 4070 Ti delivers exceptionally high frame rates in Roblox across all tested resolutions and settings. Measured data shows average FPS ranging from 145.3 at 4K Ultra to 588.5 at 1080p Low, indicating that this combination is far beyond the requirements of the game. The following analysis breaks down the scaling behavior, the roles of the CPU and GPU, the combo's ranking among 1800 tested systems, and the exact measured frame rates.

Resolution Scaling

The frame rate drop from 1080p to 4K is steep and consistent across all settings. At Low settings, the average FPS falls from 588.5 at 1920x1080 to 392.8 at 2560x1440 and 224.6 at 3840x2160. That is a reduction of 363.9 FPS from 1080p to 4K. At Ultra, the drop is from 384.6 to 258.2 to 145.3, a total reduction of 239.3 FPS. The proportional decline is similar: Low loses about 62% of its 1080p value at 4K, and Ultra loses about 62% as well. This consistent scaling indicates that the GPU's rendering load increases directly with pixel count, and the RTX 4070 Ti is the primary component handling that load at higher resolutions.

At 1080p, the frame rates are extraordinarily high—even Ultra exceeds 384 FPS. This suggests that the CPU is not a limiting factor at this resolution; the system is capable of feeding the GPU far more frames than any typical display can show. The scaling pattern from 1080p to 1440p to 4K shows that the GPU becomes progressively more stressed, but even at 4K Ultra the average FPS remains above 144, which is sufficient for high-refresh-rate monitors.

CPU Role

The Intel Core i5-12600KF is a 10-core, 16-thread processor based on the Alder Lake architecture, with a base clock of 3.70 GHz and a boost clock of 4.90 GHz. It has 20 MB of shared L3 cache and a TDP of 125 W. Its benchmark results place it in the 84th percentile among all CPUs, with an average benchmark score of 27827. Single-thread performance is strong: 3DMark single-thread score is 1016, Cinebench R23 single-core is 3309, and Geekbench single-core is 2529. Multi-thread scores are also high, with Cinebench R23 multi-core at 23444 and PassMark multi-thread at 27575.

The CPU's nearest rivals in the benchmark database are the Intel Core i9-10900K (average score 27829, 0% delta), the Intel Core i5-12600K (27851, -0.1% delta), the Intel Core Ultra 5 125H (27872, -0.2% delta), and the Intel Core i7-13700H (27716, 0.4% delta). This means the i5-12600KF is essentially tied with the i9-10900K and i5-12600K, and slightly faster than the i7-13700H. The high single-thread scores are particularly relevant for a game like Roblox, which is a sandbox title that often relies on per-core performance. The measured FPS at 1080p—where the CPU has the most influence—shows that the i5-12600KF can sustain frame rates above 500 FPS on Low and Medium settings, confirming that it is not a bottleneck at lower resolutions.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is built on the Ada Lovelace architecture with a 5 nm process. It features 12 GB of GDDR6X memory on a 192-bit bus, providing 504.2 GB/s of bandwidth. The base clock is 2310 MHz and the boost clock is 2610 MHz, with memory running at 1313 MHz (21 Gbps effective). The GPU has 7680 shading units, 240 TMUs, and 80 ROPs, along with 60 RT cores and 240 tensor cores. Its benchmark scores place it in the 85th percentile among all GPUs, with an average benchmark score of 44900. Notable results include a 3DMark Steel Nomad score of 5024, a Geekbench OpenCL score of 205028, and a PassMark G3D score of 31624.

The GPU's nearest rivals are the NVIDIA GeForce RTX 5090 Mobile (45152, -0.6% delta), the Intel Arc A730M (45592, -1.5% delta), the AMD Radeon Pro 580 (44195, 1.6% delta), and the AMD Radeon Pro 5500 XT (45642, -1.6% delta). The RTX 4070 Ti is 1.6% faster than the Radeon Pro 580 and 0.6% slower than the RTX 5090 Mobile. The 12 GB of VRAM and 504.2 GB/s bandwidth are more than sufficient for Roblox, which is not a graphically demanding title. The measured FPS at 4K Ultra—145.3—shows that the GPU can handle even the highest settings at 4K, though the frame rate drops below the 180 FPS seen at High settings.

How This Combo Ranks

Among the 1800 tested combinations in the database, this specific pairing of the Intel Core i5-12600KF and NVIDIA GeForce RTX 4070 Ti ranks 237th. That places it in the top 13.2% of all tested systems. The CPU alone is in the 84th percentile, and the GPU is in the 85th percentile, so the combo's rank is slightly lower than either component's individual percentile, but still very high. This suggests that while both components are strong, the overall system performance is not limited by either part in Roblox; the game is not demanding enough to push this hardware to its limits. The high rank reflects the fact that this combination can deliver frame rates far above typical display refresh rates at all resolutions and settings.

Measured FPS Breakdown

The following table lists the exact average FPS measured for each resolution and settings combination.

| Resolution | Settings | Average FPS |

|------------|----------|-------------|

| 3840x2160 | High | 180.0 |

| 3840x2160 | Low | 224.6 |

| 3840x2160 | Medium | 203.8 |

| 3840x2160 | Ultra | 145.3 |

| 2560x1440 | High | 316.2 |

| 2560x1440 | Low | 392.8 |

| 2560x1440 | Medium | 360.0 |

| 2560x1440 | Ultra | 258.2 |

| 1920x1080 | High | 472.8 |

| 1920x1080 | Low | 588.5 |

| 1920x1080 | Medium | 537.3 |

| 1920x1080 | Ultra | 384.6 |

At 1080p, even the Ultra preset delivers 384.6 FPS, which is well above any current display's refresh rate. The Low preset reaches 588.5 FPS, but the difference between Low and Ultra is only 203.9 FPS, and both are far beyond playable thresholds. At 1440p, Ultra still manages 258.2 FPS, while High gives 316.2 FPS. At 4K, the spread is narrower: Low gives 224.6 FPS, Medium 203.8, High 180.0, and Ultra 145.3. The gap between High and Ultra at 4K is 34.7 FPS, which is significant for users targeting 240 Hz monitors.

Settings Recommendations

Based on the measured data, the optimal settings depend on the display's refresh rate and resolution. For 1080p, all settings are playable, but the Ultra preset provides the best visual quality without any practical frame rate penalty—384.6 FPS is still far above 240 Hz. For 1440p, Ultra is also recommended, as it delivers 258.2 FPS, which exceeds 240 Hz. For 4K, the choice is between High and Ultra. High offers 180 FPS, which is 34.7 FPS higher than Ultra's 145.3. If the display is 144 Hz, Ultra is sufficient; if the display is 240 Hz, High is the better choice to stay above the refresh rate. Low and Medium settings are unnecessary at any resolution, as even the highest settings produce frame rates that are more than adequate for smooth gameplay. The data shows that this combination is so powerful that users can prioritize visual fidelity without worrying about performance.