Roblox

The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3050 4 GB lands at rank 1639 out of 1800 tested combos in Roblox. That places this configuration in the bottom tenth of the database, a surprisingly modest showing for a modern discrete GPU and a 12th-generation CPU. The combination is not a top performer, but the benchmark results show it is far from unusable, with playable frame rates across most settings and resolutions.

How This Combo Ranks

The combo’s rank of 1639 out of 1800 places it in the 9th percentile of all tested pairings. This is a low position, driven primarily by the GPU’s 4 GB VRAM ceiling and the CPU’s modest four-core architecture. While the processor itself holds a respectable 72nd percentile among all CPUs, the overall combo ranking suffers because Roblox can be demanding on both the graphics pipeline and the render thread. The data indicates this pairing is outclassed by the vast majority of tested systems, but the actual frame rates tell a more nuanced story, as the game still runs smoothly at many settings.

Relative to its closest CPU rivals, the i3-12100F holds its own. Its average benchmark score of 13516 is nearly identical to the AMD Ryzen Threadripper PRO 3975WX’s 13534, a delta of only -0.1%. It also edges out the Intel Core i7-1250U (13462, +0.4% delta), the Intel Core i3-10105 (13430, +0.6%), and the Intel Core i7-7700K (13280, +1.8%). This suggests the processor is not the limiting factor in this pairing; rather, the GPU’s limited memory capacity and bandwidth are what drag the combo down in the rankings.

GPU Role

The NVIDIA GeForce RTX 3050 4 GB is built on the Ampere architecture with the GA107 chip, fabricated on Samsung’s 8 nm process. It packs 2048 shading units, 64 texture mapping units, and 32 ROPs, along with 16 ray tracing cores and 64 tensor cores. The GPU’s base clock is 1545 MHz with a boost clock of 1740 MHz, and the memory runs at 1500 MHz, translating to 12 Gbps effective on a 128-bit bus. This yields a bandwidth of 192.0 GB/s, which is the key constraint.

With only 4 GB of GDDR6 memory, the card is heavily limited in Roblox’s higher settings, particularly at 4K resolution. The data shows that at 3840x2160 with Ultra settings, the average FPS drops to 50.3, a significant fall from the 68.6 seen at High settings. This is a direct consequence of the VRAM ceiling; the card cannot hold the textures and geometry required for Ultra presets, causing the frame rate to crater. The GPU’s FP32 performance is 7.127 TFLOPS, which is adequate for the game’s lighting and shading, but the memory subsystem is the clear bottleneck.

CPU Role

The Intel Core i3-12100F is a four-core, eight-thread processor based on the Alder Lake architecture, manufactured on Intel’s 10 nm process. It has a base clock of 3.30 GHz and a boost clock of 4.30 GHz, with a 58 W TDP. The cache layout includes 80 KB of L1 per core, 1.25 MB of L2 per core, and 12 MB of shared L3 cache. The CPU supports both DDR4 and DDR5 memory in dual-channel mode and connects via PCIe Gen 5 with 16 lanes.

In Roblox, the CPU’s single-thread performance is crucial. The processor scores 1681 in Cinebench R23 single-core and 893 in 3DMark single-thread, which are solid numbers for a budget chip. Its multi-threaded scores, such as 11912 in Cinebench R23 multi-core, are less relevant for this game, as Roblox typically scales with one or two primary threads. The benchmark results confirm that the CPU is rarely the limiting factor in this combo; even at 1080p with Low settings, where the GPU has the least work, the average FPS hits 214.8, indicating the CPU can feed the GPU well beyond what the graphics card can render at higher presets.

Measured FPS Breakdown

At 1920x1080, the combo delivers strong performance. With Low settings, the average FPS is 214.8, which is exceptionally smooth. Medium settings drop to 195.9, still far above the refresh rate of most monitors. High settings yield 176.4, and even Ultra settings maintain a playable 142.2 FPS. These numbers show that at 1080p, the 4 GB VRAM is sufficient for most presets, and the GPU’s raw compute is enough to handle the game’s demands.

Moving to 2560x1440, the performance remains solid. Low settings produce 142.9 FPS, Medium settings 134.2, and High settings 114.1. Ultra settings fall to 96.4 FPS, which is still playable but shows the first signs of strain. The gap between Low and Ultra at this resolution is about 46 FPS, indicating that the GPU is working harder as the pixel count increases.

At 3840x2160, the limits become apparent. Low settings average 79.5 FPS, and Medium settings hit 77.0 FPS. High settings drop to 68.6 FPS, but Ultra settings plummet to 50.3 FPS. This is a massive drop of 29.2 FPS from High to Ultra, a clear indicator that the 4 GB VRAM buffer is being exhausted. The card simply cannot maintain smooth frame rates at 4K with the highest quality presets, making this resolution best suited for Low or Medium settings if a consistent frame rate is the goal.

Resolution Scaling

The scaling from 1080p to 4K reveals where the bottleneck lies. At 1080p Low, the combo produces 214.8 FPS. At 1440p Low, that drops to 142.9 FPS, a 33.5% reduction. At 4K Low, the frame rate falls to 79.5 FPS, a further 44.4% reduction from 1440p. This steep decline suggests the GPU is the limiting factor as the pixel count rises, though the CPU still has headroom.

For Ultra settings, the pattern is more extreme. At 1080p Ultra, the average is 142.2 FPS. At 1440p Ultra, it drops to 96.4 FPS, a 32.2% decrease. At 4K Ultra, it plunges to 50.3 FPS, a 47.8% drop from 1440p. This disproportionate fall at 4K Ultra is the signature of a VRAM capacity issue rather than pure compute limits. The 192.0 GB/s bandwidth and 4 GB capacity are insufficient for the asset loading required at that resolution, causing the frame rate to collapse.

The data shows that the combo scales well from 1080p to 1440p, with only moderate frame rate losses. However, the jump to 4K is punishing, especially at higher settings. At 1080p, the system is likely CPU-bound at Low settings, given the 214.8 FPS result, but becomes GPU-bound at higher presets. At 4K, the GPU is unequivocally the limiting component, with the VRAM buffer acting as a hard cap on performance. For users targeting 1080p or 1440p, this combo is a capable performer, but 4K Ultra is out of reach, and the benchmark results make it clear that the 4 GB memory allocation is the Achilles’ heel of this otherwise balanced pairing.