Barony
This combination provides smooth gameplay with an average of 95 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 33 | 46 | 49 | 68 |
| 1440p QHD | 61 | 84 | 95 | 129 |
| 1080p Full HD | 94 | 131 | 150 | 205 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Barony with Intel Core i3-12100F + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis
The Intel Core i3-12100F paired with the NVIDIA GeForce RTX 3050 4 GB delivers a distinctive performance profile in Barony, a roguelike title from 2015. Benchmark data reveals that this combination ranks 1526th out of 1702 tested combos, placing it in the lower third of the field. The measured frame rates show a system that is heavily constrained by its graphics card at higher resolutions, yet capable of exceeding 200 FPS at 1080p on Low settings. This analysis dissects the CPU’s role, the combo’s standing, resolution scaling behavior, and exact FPS measurements across all tested configurations.
CPU Role — cores, clocks, and how they relate to this game's results
The Intel Core i3-12100F is a 4-core, 8-thread processor based on the Alder Lake architecture, built on Intel’s 10 nm process node. Its base clock is 3.30 GHz with a boost clock of 4.30 GHz, and it carries 12 MB of shared L3 cache. The CPU’s benchmark scores indicate strong single-threaded performance relative to its multi-threaded capabilities: it scores 893 in 3dMark single-thread and 2224 in Geekbench single-core, while multi-threaded results reach 4023 in 3dMark max threads and 7413 in Geekbench multicore. In Cinebench R23, it achieves 1681 single-core and 11912 multi-core.
In Barony, a roguelike that is not typically demanding on CPU resources, the i3-12100F’s 4-core/8-thread configuration is sufficient to avoid becoming the primary bottleneck at most settings. The CPU’s percentile rank is 72 against all CPUs, meaning it outperforms 72% of processors in the database. Its average benchmark score of 13516 sits within 0.1% of the AMD Ryzen Threadripper PRO 3975WX (13534) and 0.4% ahead of the Intel Core i7-1250U (13462). The 3dmark 16-thread score of 4051 and 4-thread score of 2859 show that scaling from 4 to 16 threads yields only marginal gains, which aligns with a game that relies more on per-core performance than thread count.
The single-threaded strength is particularly relevant: PassMark single-thread score of 3444 and Cinebench R20 single-core of 706 indicate that the CPU can feed frames quickly at lower resolutions. However, the data suggests that at 1080p with Low settings, the combo reaches 205.2 FPS, which is closer to a GPU limit than a CPU ceiling, given the RTX 3050’s 4 GB VRAM and 192.0 GB/s bandwidth. The CPU’s 58 W TDP and lack of integrated graphics mean all rendering falls to the discrete GPU, but the 4-core design does not show signs of holding back frame rates in this title.
How This Combo Ranks — use comboRankInGame vs other tested combos
The combo sits at rank 1526 out of 1702 tested combinations, which places it in the 89.7th percentile of the worst-performing combos—meaning only 176 combos rank lower. This is a low standing, but the measured FPS data tells a more nuanced story than the raw rank suggests. The rank reflects the entire test suite, not just Barony, so the combo’s performance in this specific roguelike may be better than its overall standing indicates.
At 1080p with Ultra settings, the combo delivers 93.6 FPS, which is still above the 60 FPS threshold for smooth gameplay. At 1440p with High settings, it achieves 84.3 FPS, and at 4K with Low settings, it reaches 67.9 FPS. These numbers show that the combo can handle Barony at playable frame rates across most configurations, even if the rank suggests otherwise. The CPU’s nearest rivals—the AMD Ryzen Threadripper PRO 3975WX (deltaPct -0.1), Intel Core i7-1250U (deltaPct 0.4), Intel Core i3-10105 (deltaPct 0.6), and Intel Core i7-7700K (deltaPct 1.8)—are all within 2% of its average benchmark score, indicating that the i3-12100F is competitively positioned for CPU-bound scenarios.
The rank is likely dragged down by the GPU’s modest capabilities. The RTX 3050 4 GB has a percentile rank of 50 against all GPUs, meaning it sits exactly at the median. With only 4 GB of GDDR6 memory, the GPU may struggle with texture-heavy scenes at higher resolutions, which could explain the steep FPS drops from 1080p to 4K. The combo’s rank of 1526 reflects a GPU that is more suited to 1080p gaming, while the CPU is capable of supporting higher frame rates if paired with a stronger graphics card.
Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component
The FPS scaling across resolutions clearly identifies the GPU as the limiting component in this combo. At 1080p with Low settings, the combo achieves 205.2 FPS. Dropping to 1440p Low yields 129.4 FPS, a 37% reduction, and further dropping to 4K Low yields 67.9 FPS, a 67% reduction from 1080p. This pattern is consistent with a GPU-bound scenario, where increasing pixel count directly taxes the graphics card’s fill rate and memory bandwidth.
The RTX 3050 4 GB has a pixel rate of 55.68 GPixel/s and a texture rate of 111.4 GTexel/s, with a memory bandwidth of 192.0 GB/s. At 4K, the 8.3 million pixels (3840x2160) require substantial bandwidth, and the 4 GB VRAM may also become a limiting factor. The FPS drop from 1080p to 4K is more severe at higher settings: at High settings, FPS falls from 130.9 to 46, a 65% reduction; at Ultra settings, it falls from 93.6 to 32.7, a 65% reduction. This consistency across settings suggests the GPU is the bottleneck regardless of visual complexity.
The CPU’s role is more prominent at lower resolutions where the GPU is less taxed. The i3-12100F’s single-threaded performance allows the combo to reach 205.2 FPS at 1080p Low, but the FPS does not scale proportionally with resolution decreases, indicating the CPU is not the primary limiter. If the CPU were the bottleneck, we would expect FPS to remain flat or drop less steeply as resolution increases. The data shows the opposite, confirming the GPU is the limiting component. The 4 GB VRAM is likely a key factor, as Barony’s textures may exceed this capacity at 4K, causing frame time spikes or reduced performance.
Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers
At 1920x1080, the combo shows a wide range of performance across settings. Low settings yield 205.2 FPS, Medium settings produce 150.2 FPS, High settings achieve 130.9 FPS, and Ultra settings drop to 93.6 FPS. The gap between Low and Ultra is 111.6 FPS, or 54%, indicating that visual settings have a significant impact on frame rates at this resolution. All values exceed 90 FPS, making 1080p the sweet spot for this combo, with even Ultra settings providing smooth gameplay.
At 2560x1440, the FPS figures are lower but still playable. Low settings produce 129.4 FPS, Medium settings yield 95.1 FPS, High settings achieve 84.3 FPS, and Ultra settings drop to 61 FPS. The drop from 1080p to 1440p is roughly 30-40% across all settings, consistent with the increased pixel count. Ultra settings at 1440p hover near the 60 FPS threshold, making it a viable option for gamers who prefer higher fidelity over frame rate.
At 3840x2160, the combo struggles to maintain high frame rates. Low settings produce 67.9 FPS, which is still above 60, but Medium settings drop to 48.6 FPS, High settings yield 46 FPS, and Ultra settings fall to 32.7 FPS. The 4K Ultra result is below 33 FPS, making it borderline unplayable for fast-paced action. The data shows that 4K is only viable at Low settings, and even then, the FPS is marginal. The RTX 3050’s 4 GB VRAM and 192.0 GB/s bandwidth are insufficient for 4K gaming at higher settings in Barony.
FAQ
Q: What is the best resolution and settings for this combo in Barony?
A: Based on measured FPS, 1080p with Ultra settings delivers 93.6 FPS, which is smooth and visually detailed. For higher frame rates, 1080p Low reaches 205.2 FPS, while 1440p Low provides 129.4 FPS.
Q: Why does the combo rank 1526th out of 1702 if it can achieve over 200 FPS?
A: The combo rank reflects performance across all tested games, not just Barony. The RTX 3050 4 GB has a median percentile rank of 50, which drags down the overall standing despite strong results in this specific roguelike.
Q: Is the CPU or GPU the bottleneck at 1080p?
A: At 1080p Low settings, the combo reaches 205.2 FPS, which is likely GPU-limited. The i3-12100F’s single-thread score of 893 in 3dMark and 3444 in PassMark indicates it can handle high frame rates, but the RTX 3050’s 4 GB VRAM and 192.0 GB/s bandwidth cap performance.
Q: Can this combo handle 4K gaming in Barony?
A: Only at Low settings, where it achieves 67.9 FPS. Medium settings drop to 48.6 FPS, High to 46 FPS, and Ultra to 32.7 FPS, making 4K viable only at the lowest visual quality.
Q: How does the CPU compare to its nearest rivals?
A: The i3-12100F scores 13516 on average, within 0.1% of the AMD Ryzen Threadripper PRO 3975WX (13534) and 1.8% ahead of the Intel Core i7-7700K (13280). This places it in a competitive position for CPU-bound tasks.
Q: What is the FPS difference between Medium and Ultra at 1440p?
A: At 1440p, Medium settings produce 95.1 FPS, while Ultra settings yield 61 FPS, a difference of 34.1 FPS or 36%. This shows that Ultra settings at 1440p are playable but require a significant frame rate trade-off.
Hardware Specifications
Intel Core i3-12100F
NVIDIA GeForce RTX 3050 4 GB
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 3050 4 GB in Barony
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 67.9 |
| 3840x2160 | Medium | 48.6 |
| 3840x2160 | High | 46.0 |
| 3840x2160 | Ultra | 32.7 |
| 2560x1440 | Low | 129.4 |
| 2560x1440 | Medium | 95.1 |
| 2560x1440 | High | 84.3 |
| 2560x1440 | Ultra | 61.0 |
| 1920x1080 | Low | 205.2 |
| 1920x1080 | Medium | 150.2 |
| 1920x1080 | High | 130.9 |
| 1920x1080 | Ultra | 93.6 |
Barony with RTX 3050 4 GB + Other CPUs
See how Barony performs with the same GPU but different processors.
Other Games with ii3-12100F + RTX 3050 4 GB
Explore FPS benchmarks for other games using this same hardware combination.