Revolution Idle

Revolution Idle

AVERAGE FPS
64
good

This combination provides smooth gameplay with an average of 64 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 20 32 33 44
1440p QHD 39 60 64 84
1080p Full HD 61 96 101 133

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 44
3840x2160 Medium 33
3840x2160 High 32
3840x2160 Ultra 20
2560x1440 Low 84
2560x1440 Medium 64
2560x1440 High 60
2560x1440 Ultra 39
1920x1080 Low 133
1920x1080 Medium 101
1920x1080 High 96
1920x1080 Ultra 61

Revolution Idle with Intel Core Ultra 7 265 + NVIDIA GeForce RTX 4060, In-Depth Analysis

# Resolution Scaling

The measured FPS data for Revolution Idle with the Intel Core Ultra 7 265 and NVIDIA GeForce RTX 4060 shows a clear pattern of performance degradation as resolution increases. At 1080p High settings, the combo delivers 96 FPS average, which drops to 60 FPS at 1440p and further to 32 FPS at 4K. This represents a 37.5% performance loss moving from 1080p to 1440p, and an additional 46.7% loss moving from 1440p to 4K at High settings.

Looking at the Low preset, the scaling is more linear: 133 FPS at 1080p, 84 FPS at 1440p, and 44 FPS at 4K. The percentage drops are 36.8% from 1080p to 1440p and 47.6% from 1440p to 4K. This consistent pattern across settings indicates that the RTX 4060's 8 GB GDDR6 memory with a 128-bit bus and 272.0 GB/s bandwidth becomes the limiting factor at higher resolutions. The GPU's 15.11 TFLOPS FP32 compute is sufficient for 1080p gameplay but struggles to maintain frame rates as pixel count increases.

The Medium preset shows the most complete data with min and max FPS values recorded. At 1080p Medium, the average is 101 FPS with a range of 86 to 116 FPS. At 1440p Medium, the average drops to 64 FPS with a range of 54 to 73 FPS. At 4K Medium, the average is 33 FPS with a range of 28 to 38 FPS. The frame time consistency degrades proportionally with resolution, suggesting the GPU is the primary bottleneck at 4K.

Ultra settings reveal the steepest scaling curve. The combo manages 61 FPS at 1080p Ultra, but this collapses to 39 FPS at 1440p Ultra and just 20 FPS at 4K Ultra. The 67.2% performance drop from 1080p to 4K Ultra is the largest across all presets, indicating that the RTX 4060's ROP count of 48 and pixel rate of 118.1 GPixel/s cannot sustain the fill rate demands of Ultra settings at high resolutions.

The data suggests that for Revolution Idle, the RTX 4060 is the limiting component at 1440p and 4K. The CPU's 20 cores and 20 threads with a boost clock of 5.30 GHz are more than capable of feeding the GPU, as evidenced by the relatively small performance gap between Low and High settings at 1080p (133 vs 96 FPS). At 4K, the gap narrows further (44 vs 32 FPS), confirming that the GPU's rendering pipeline is saturated.

# FAQ

Q: Can this combo handle 4K gaming in Revolution Idle?

A: At 4K resolution, the Intel Core Ultra 7 265 and RTX 4060 combo only achieves 32 FPS on High settings and 20 FPS on Ultra. The only playable option at 4K is Low settings with 44 FPS, which still falls below the 60 FPS threshold most players consider smooth. For 4K gameplay, the RTX 4060's 8 GB memory capacity and 128-bit bus width prove insufficient.

Q: What is the best resolution for this combo?

A: The data shows 1080p is the sweet spot. At 1920x1080, the combo delivers 96 FPS on High, 101 FPS on Medium, and 133 FPS on Low settings. Even Ultra settings reach 61 FPS at 1080p, making it the only resolution where all presets are playable. At 1440p, only Low (84 FPS) and High (60 FPS) meet playable standards.

Q: How does the RTX 4060 compare to its nearest rivals?

A: The RTX 4060 has an average benchmark score of 17639, placing it at the 61st percentile among all GPUs. Its closest rival is the AMD Radeon HD 7790 with an average score of 17666, which is 0.2% higher. The AMD Radeon 780M scores 17588 (0.3% lower), while the AMD Radeon Pro 560 scores 17551 (0.5% lower). The performance differences are minimal, within 0.7%.

Q: Is the CPU holding back the GPU in this game?

A: No, the data indicates the CPU is not a bottleneck. The Intel Core Ultra 7 265 ranks in the 93rd percentile among all CPUs with an average benchmark score of 64640. Its nearest rival, the AMD EPYC 4464P, scores 64823 (0.3% higher), showing the CPU is competitive. At 1080p, the combo achieves 133 FPS on Low settings, suggesting the CPU can drive high frame rates when the GPU is not constrained.

Q: What frame rates can I expect at 1440p?

A: At 2560x1440, the combo delivers 84 FPS on Low, 64 FPS on Medium, 60 FPS on High, and 39 FPS on Ultra settings. The Medium preset shows the most consistent performance with a range of 54 to 73 FPS. For smooth 1440p gameplay, Low or Medium settings are recommended, as High barely touches 60 FPS.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 1551 out of 2986 tested configurations in Revolution Idle, placing it in the lower-middle portion of the database. This ranking reflects the RTX 4060's modest performance at higher resolutions, despite the strong CPU. The GPU's 61st percentile ranking among all GPUs drags down the overall combo ranking.

# How This Combo Ranks

The Intel Core Ultra 7 265 with NVIDIA GeForce RTX 4060 combination ranks 1551 out of 2986 tested combos in Revolution Idle. This places the combo in the 48.1% percentile of all tested configurations, meaning roughly half of the tested systems perform better. The ranking is heavily influenced by the GPU, which sits at the 61st percentile among all GPUs, while the CPU performs at the 93rd percentile among all CPUs.

The disparity between CPU and GPU performance explains the combo's middling rank. The Core Ultra 7 265 is a high-end processor based on the Arrow Lake architecture, manufactured on TSMC's 3 nm process node with 17,800 million transistors. Its Cinebench R23 scores of 42216 multi-core and 5960 single-core demonstrate strong computational capability. However, the RTX 4060, built on Ada Lovelace architecture with 18,900 million transistors on a 5 nm process, is a mid-range GPU that limits the system's gaming performance.

In Revolution Idle specifically, the combo's rank suggests that the RTX 4060 is the determining factor. The game appears to be GPU-bound at higher resolutions, as evidenced by the FPS scaling data. At 1080p, the combo can exceed 100 FPS on Medium and High settings, but at 4K, it struggles to maintain 35 FPS on any setting above Low. This performance pattern pushes the combo's rank down compared to systems with stronger GPUs.

The CPU's nearest rivals provide context for its performance. The AMD EPYC 4464P scores 64823 on average, just 0.3% higher than the Core Ultra 7 265's 64640. The Intel Core Ultra 7 265F scores 64438 (0.3% lower), while the AMD EPYC 7343 scores 64202 (0.7% lower). These small deltas indicate the CPU is competitive with other high-end processors, but the GPU's limitations prevent the combo from achieving a higher rank.

# Settings Recommendations

For Revolution Idle with this combo, the optimal settings depend on the target resolution and desired frame rate. At 1080p, the Medium preset offers the best balance of visual quality and performance, delivering 101 FPS average with a tight frame time range of 86 to 116 FPS. High settings at 1080p provide 96 FPS, which is nearly identical in performance while offering better visuals, making it a viable alternative.

At 1440p, the High preset achieves exactly 60 FPS average, which meets the minimum threshold for smooth gameplay but leaves no headroom for demanding scenes. The Medium preset at 1440p delivers 64 FPS with a range of 54 to 73 FPS, offering better consistency and a small performance buffer. For players who prioritize frame rate stability, Medium is the recommended choice at 1440p.

At 4K, none of the presets provide a satisfactory experience. Low settings achieve 44 FPS, Medium reaches 33 FPS, High drops to 32 FPS, and Ultra falls to 20 FPS. The 4K Medium preset has a recorded minimum of 28 FPS, which may cause noticeable stuttering. Given these numbers, 4K gaming is not practical with this combo unless players accept Low settings and frame rates below 45 FPS.

The Ultra preset is only viable at 1080p, where it reaches 61 FPS. At any higher resolution, Ultra settings produce frame rates below 40 FPS, which is generally unplayable for most users. The data suggests that the RTX 4060's 8 GB VRAM and 128-bit memory interface are insufficient for Ultra settings beyond 1080p in this title.

For the best overall experience, the Medium preset at 1080p or 1440p provides the most consistent performance. The Medium preset shows the smallest frame time variance across all resolutions, with the 1080p range of 86-116 FPS being notably tighter than the High preset's unrecorded variance. This consistency is valuable in an idle game where the display may run for extended periods.

# Measured FPS Breakdown

1920x1080 (1080p):

  • Low: 133 FPS average
  • Medium: 101 FPS average, 86 FPS minimum, 116 FPS maximum
  • High: 96 FPS average
  • Ultra: 61 FPS average

At 1080p, the combo demonstrates strong performance across all presets. The gap between Low and Medium is 32 FPS, while the gap between Medium and High is only 5 FPS. The drop from High to Ultra is substantial at 35 FPS, indicating that Ultra settings impose a significant rendering load on the RTX 4060.

2560x1440 (1440p):

  • Low: 84 FPS average
  • Medium: 64 FPS average, 54 FPS minimum, 73 FPS maximum
  • High: 60 FPS average
  • Ultra: 39 FPS average

At 1440p, the performance scaling becomes steeper. Low to Medium drops by 20 FPS, Medium to High drops by 4 FPS, and High to Ultra drops by 21 FPS. The Medium preset's minimum of 54 FPS is close to the 60 FPS target, suggesting that frame drops may be noticeable during intensive scenes.

3840x2160 (4K):

  • Low: 44 FPS average
  • Medium: 33 FPS average, 28 FPS minimum, 38 FPS maximum
  • High: 32 FPS average
  • Ultra: 20 FPS average

At 4K, the combo is clearly GPU-limited. Low to Medium drops by 11 FPS, Medium to High drops by 1 FPS, and High to Ultra drops by 12 FPS. The minimal difference between Medium and High (1 FPS) suggests that the GPU is saturated and additional visual features have negligible performance impact. The Medium preset's minimum of 28 FPS indicates significant frame time spikes.

The overall pattern shows that the RTX 4060 provides playable frame rates at 1080p across all settings, marginal performance at 1440p on Low through High, and sub-45 FPS performance at 4K regardless of settings. The CPU's strong single-thread performance (5960 in Cinebench R23) ensures that it does not bottleneck the GPU at any resolution.

# CPU Role

The Intel Core Ultra 7 265 is a 20-core, 20-thread processor based on the Arrow Lake architecture, manufactured on TSMC's 3 nm process node. It has a base clock of 2.40 GHz and a boost clock of 5.30 GHz, with 30 MB of shared L3 cache. The CPU's memory bandwidth is 102.4 GB/s over a dual-channel DDR5 interface, and it supports PCIe Gen 5 with 20 lanes.

In Revolution Idle, the CPU's role appears minimal, as the game is GPU-bound at most settings. The CPU's Passmark multi-thread score of 49682 and single-thread score of 4689 indicate strong computational ability. Its Cinebench R23 scores of 42216 multi-core and 5960 single-core rank it in the 93rd percentile among all CPUs, showing it can handle demanding workloads.

The CPU's nearest rivals in benchmark scores are all server-class processors. The AMD EPYC 4464P scores 64823 (0.3% higher), while the AMD EPYC 9124 scores 65104 (0.7% higher). The Intel Core Ultra 7 265F scores 64438 (0.3% lower), and the AMD EPYC 7343 scores 64202 (0.7% lower). These rivals are workstation and server CPUs, highlighting that the Core Ultra 7 265 competes with enterprise-grade silicon.

For gaming, the CPU's 20 cores and 20 threads provide ample parallel processing capacity. The boost clock of 5.30 GHz ensures strong single-thread performance, which is critical for game logic and physics. The L3 cache of 30 MB shared across all cores helps reduce memory latency, and the 102.4 GB/s memory bandwidth supports fast data transfer to the GPU.

The 65 W TDP of the Core Ultra 7 265 is notable for a 20-core processor, indicating high power efficiency from the 3 nm process. This efficiency means the CPU is unlikely to thermal throttle in typical gaming scenarios, maintaining consistent performance. The integrated Arc Xe-LPG Graphics 32EU provides basic display output, though the discrete RTX 4060 handles all rendering in this title.

In the context of Revolution Idle, the CPU's performance is more than sufficient. The measured FPS at 1080p Low (133 FPS) represents a scenario where the CPU is feeding the GPU effectively, and the fact that frame rates scale down with resolution rather than staying CPU-limited confirms that the processor is not the bottleneck. The combo's rank of 1551 out of 2986 is primarily determined by the GPU's mid-range positioning, not the CPU's capability.

Hardware Specifications

Intel Core Ultra 7 265

Cores / Threads 20 / 20
Base Clock 2400 MHz
Boost Clock 5300 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce RTX 4060

VRAM 8 GB GDDR6
Base Clock —
Boost Clock 2460 MHz MHz
TDP 115 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 7 265 + NVIDIA GeForce RTX 4060 in Revolution Idle

Resolution Settings Avg FPS
3840x2160 Low 44.0
3840x2160 Medium 33.0
3840x2160 High 32.0
3840x2160 Ultra 20.0
2560x1440 Low 84.0
2560x1440 Medium 64.0
2560x1440 High 60.0
2560x1440 Ultra 39.0
1920x1080 Low 133.0
1920x1080 Medium 101.0
1920x1080 High 96.0
1920x1080 Ultra 61.0

Revolution Idle with iUltra 7 265 + Other GPUs

See how Revolution Idle performs with the same CPU but different graphics cards.

Revolution Idle with RTX 4060 + Other CPUs

See how Revolution Idle performs with the same GPU but different processors.

Other Games with iUltra 7 265 + RTX 4060

Explore FPS benchmarks for other games using this same hardware combination.