Revolution Idle

# Revolution Idle with Intel Core i7-14700F + NVIDIA GeForce RTX 5090 D

The Intel Core i7-14700F paired with the NVIDIA GeForce RTX 5090 D delivers a fascinating performance profile in Revolution Idle, a game that places unusual demands on both CPU and GPU. The measured data reveals a system that scales predictably across resolutions, with the 20-core, 28-thread processor and the 32 GB GDDR7 graphics card combining to produce frame rates that range from a modest 43 FPS at 4K Ultra to a blistering 233 FPS at 1080p Low. This combination ranks 18th out of 2,986 tested combos in this title, placing it in the top 1% of all configurations, yet the performance deltas between settings tell a more nuanced story about where the bottlenecks truly lie.

Resolution Scaling

The FPS drop from 1080p to 4K in Revolution Idle is substantial but not uniform across settings, revealing the shifting balance between CPU and GPU load as pixel count increases. At Low settings, the average frame rate falls from 233 FPS at 1920x1080 to 94 FPS at 3840x2160, a reduction of 59.7% that indicates the GPU is becoming increasingly dominant in the rendering pipeline at higher resolutions. The Medium preset shows a similar pattern, dropping from 210 FPS at 1080p to 71 FPS at 4K, a 66.2% decrease that suggests the additional graphical effects in Medium amplify the GPU's workload more aggressively than the simpler Low preset.

High settings exhibit the most dramatic scaling penalty, with average FPS falling from 204 at 1080p to 129 at 1440p and finally to 67 at 4K. This represents a 67.2% reduction from the lowest to highest resolution, and the steep drop between 1440p and 4K — from 129 to 67 FPS, a 48.1% decline — indicates that the RTX 5090 D's 32 GB frame buffer and 512-bit memory bus are being taxed heavily by the combination of high detail and extreme pixel density. Ultra settings show the most severe scaling, starting at 131 FPS at 1080p and collapsing to 83 FPS at 1440p and just 43 FPS at 4K, a total reduction of 67.2% that underscores how the Ultra preset's additional effects compound with resolution increases.

The pattern across all settings reveals that Revolution Idle becomes progressively more GPU-bound as resolution climbs, but the CPU still matters at 1080p. The fact that Low settings at 1080p hit 233 FPS while Ultra at the same resolution only reaches 131 FPS — a 43.8% gap — suggests that even at 1080p, the GPU's shading units and raster operations pipelines are the primary constraint rather than the i7-14700F's 20 cores. However, the relatively modest FPS differences between 1080p and 1440p at Low settings (233 vs 179 FPS, a 23.2% drop) compared to the larger gaps at High and Ultra settings indicate that the CPU can keep pace with the GPU's output at lower graphical loads, with the bottleneck shifting decisively to the GPU as the preset complexity increases.

CPU Role

The Intel Core i7-14700F brings substantial processing power to Revolution Idle, with 20 cores and 28 threads operating at a base clock of 2.10 GHz and boosting up to 5.40 GHz. This Raptor Lake-R architecture processor, built on Intel's 10 nm process, demonstrates strong synthetic performance with a Cinebench R23 multi-core score of 35,122 and a single-core score of 4,958, placing it in the 91st percentile of all CPUs tested. The 33 MB of shared L3 cache and 2 MB L2 cache per core provide ample on-die storage for the game's simulation logic, which in an idle genre title often involves complex background calculations that can stress even high-core-count processors.

In the context of Revolution Idle's measured FPS, the CPU's role is most apparent at 1080p resolution where frame rates exceed 200 FPS. At Low settings, the system achieves 233 FPS, and at Medium and High, it maintains 210 and 204 FPS respectively, suggesting that the i7-14700F can feed the RTX 5090 D sufficiently at lower pixel counts. The processor's 5.40 GHz boost clock is critical here, as single-threaded performance often dominates in idle games that may not fully utilize all 28 threads. The Geekbench single-core score of 2,429 and PassMark single-thread score of 4,257 indicate strong per-core throughput, which helps maintain high minimum frame rates in CPU-limited scenarios.

However, the data also shows that the CPU is not the limiting factor at higher resolutions. The fact that Ultra settings at 4K produce just 43 FPS while the CPU's multi-threaded capabilities remain largely untapped suggests that Revolution Idle's rendering workload, not its simulation logic, is the primary bottleneck at extreme resolutions. The i7-14700F's PassMark multi-threaded score of 41,317 and Cinebench R23 multi-core result of 35,122 demonstrate that the processor has ample headroom for the game's computational demands, with the nearest rival, the AMD Ryzen 9 7900X, scoring only 0.6% higher on average — a negligible difference that confirms the Intel chip is more than adequate for this title.

GPU Role

The NVIDIA GeForce RTX 5090 D is the dominant component in this pairing, and its specifications explain much of the observed performance scaling. With 32 GB of GDDR7 memory on a 512-bit bus delivering 1.79 TB/s of bandwidth, the GPU has both the capacity and throughput to handle Revolution Idle's most demanding settings at 4K. The 21,760 shading units, 680 texture mapping units, and 176 raster output pipelines provide a massive parallel processing capability, reflected in the 104.8 TFLOPS of FP32 compute and a pixel rate of 423.6 GPixel/s. The GPU's boost clock of 2407 MHz, built on TSMC's 5 nm process with 92,200 million transistors, ensures that even the most complex frame rendering at Ultra settings can be processed with minimal latency.

The measured FPS data shows the GPU's limitations becoming apparent as resolution and settings increase. At 1080p, the GPU delivers between 131 FPS (Ultra) and 233 FPS (Low), indicating that the RTX 5090 D is not fully utilized at this resolution, with the CPU likely providing the upper bound. Moving to 1440p, the performance drops to a range of 83-179 FPS, still well above playable thresholds but showing the GPU beginning to work harder. At 4K, the frame rates fall to 43-94 FPS, with Ultra settings producing the lowest result of 43 FPS — a clear indication that the GPU's rendering pipeline is saturated by the combination of high pixel count and maximum graphical effects.

The GPU's benchmark scores reinforce its position as a top-tier component, with a 3DMark Steel Nomad DX12 score of 14,326 and a PassMark G3D score of 44,065 placing it in the 92nd percentile of all GPUs. The VRAM capacity is particularly relevant for Revolution Idle at 4K Ultra, where 32 GB ensures that texture streaming and frame buffering never become a constraint, even if the raw compute power is the limiting factor at those settings. The GPU's nearest rivals in benchmarking — the AMD Radeon RX 6650M XT and RX 6850M XT — are within 1.6% and 1.1% of its average score respectively, yet the RTX 5090 D's combination of high bandwidth and massive shading unit count gives it a clear advantage in this game's specific workload.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low settings produce an average of 233 FPS, with Medium following closely at 210 FPS, High at 204 FPS, and Ultra at 131 FPS. The Medium preset shows a minimum of 179 FPS and a maximum of 242 FPS, indicating some variability but maintaining a consistently high floor. The gap between Low and Medium is just 23 FPS (9.9%), while the jump from High to Ultra costs 73 FPS (35.8%), suggesting that Ultra's additional effects — likely including enhanced lighting and shadow quality — exact a significant toll on the GPU even at 1080p.

At 2560x1440, the average frame rates remain strong but show a clear step down. Low settings achieve 179 FPS, High reaches 129 FPS, Medium averages 135 FPS with a range of 115-156 FPS, and Ultra drops to 83 FPS. Interestingly, Medium outperforms High at this resolution (135 vs 129 FPS), which may reflect differences in how the two presets allocate GPU resources. The 1440p results show that High settings lose 75 FPS compared to 1080p (204 to 129, a 36.8% drop), while Ultra loses 48 FPS (131 to 83, a 36.6% drop), indicating a uniform scaling penalty across presets at this resolution.

At 3840x2160, the performance becomes more constrained but remains playable on most presets. Low settings average 94 FPS, providing a smooth experience for competitive or fast-paced gameplay. Medium averages 71 FPS with a range of 60-81 FPS, keeping the minimum just above the 60 FPS threshold. High drops to 67 FPS, and Ultra falls to 43 FPS, which may introduce noticeable stutter in a game that relies on continuous background updates. The 4K results show that Low settings are 40% faster than Medium (94 vs 71 FPS) and 54% faster than High (94 vs 67 FPS), while Ultra is 36% slower than High (43 vs 67 FPS), highlighting the exponential performance cost of the Ultra preset at high resolutions.

How This Combo Ranks

The combination of the Intel Core i7-14700F and NVIDIA GeForce RTX 5090 D ranks 18th out of 2,986 tested combos in Revolution Idle, placing it in the top 0.6% of all configurations evaluated. This exceptional ranking reflects the balanced capabilities of both components: the CPU's 20 cores and 5.40 GHz boost clock provide sufficient single-threaded and multi-threaded performance for the game's simulation layer, while the GPU's 32 GB VRAM and 104.8 TFLOPS compute handle the rendering demands across all resolution and settings combinations. The rank suggests that very few other systems in the database achieve higher average frame rates in this title, and those that do likely employ even more extreme hardware configurations.

The CPU's individual ranking further contextualizes this result. With an average benchmark score of 53,620 across all tests, the i7-14700F sits in the 91st percentile of all CPUs, with its nearest rivals — the Intel Xeon 6505P (0.2% lower), Intel Xeon Phi 7290 (0.3% higher), AMD Ryzen 9 7900X (0.6% higher), and AMD EPYC 7313P (0.8% higher) — all within a narrow performance band. This indicates that the processor is performing at a level commensurate with its position in the combo ranking, providing no bottleneck that would drag the overall system down. Similarly, the GPU's 92nd percentile ranking, with an average score of 77,712, confirms that the RTX 5090 D is operating well above the median GPU, contributing significantly to the combo's high placement.

The 18th rank out of nearly 3,000 combos suggests that this system outperforms the vast majority of alternatives in Revolution Idle, but the measured FPS data reveals that the ranking is not uniform across settings. At 4K Ultra, the 43 FPS average would likely place the combo lower relative to systems with even more powerful GPUs, while at 1080p Low, the 233 FPS result would rank near the top. The overall rank of 18 likely reflects a weighted average across all tested configurations, and the data indicates that this combo excels at lower resolutions and settings while remaining competitive but not dominant at maximum quality presets.

Settings Recommendations

For players seeking the smoothest experience in Revolution Idle, the data points to Medium settings as the optimal balance across all resolutions. At 1080p, Medium delivers 210 FPS with a minimum of 179 FPS, offering nearly the same performance as Low (233 FPS) while providing enhanced visual quality. At 1440p, Medium's 135 FPS average with a 115-156 FPS range maintains high fluidity, and at 4K, Medium's 71 FPS average with a 60 FPS minimum keeps the experience just above the critical threshold for smooth gameplay. The consistency of Medium's performance — with the smallest gap between minimum and maximum FPS at each resolution — makes it the most predictable preset for maintaining stable frame times.

High settings present a viable alternative for players prioritizing visual fidelity over maximum frame rate, particularly at 1080p and 1440p. At 1080p, High's 204 FPS average is within 9 FPS of Medium, making the visual upgrade essentially free. At 1440p, High's 129 FPS average is only 6 FPS lower than Medium, still well above the 60 FPS target. However, at 4K, High's 67 FPS average and lack of a reported minimum FPS make it a riskier choice, especially since Medium provides 4 FPS more on average with a documented 60 FPS floor. For ultra-high refresh rate displays at 1080p, Low settings at 233 FPS offer the maximum frame rate, but the 23 FPS difference from Medium is unlikely to be perceptible on most monitors.

Ultra settings are best avoided at 4K, where the 43 FPS average will likely result in noticeable judder in a game that updates its simulation continuously. At 1440p, Ultra's 83 FPS average is playable but represents a 38.5% reduction from High's 129 FPS, making it difficult to justify the visual improvements. At 1080p, Ultra's 131 FPS average is acceptable for most players, but the 73 FPS gap from High suggests that the preset's additional effects provide diminishing returns. The data strongly indicates that Medium settings at any resolution offer the best combination of frame rate stability and visual quality, with High serving as a reasonable alternative at 1080p and 1440p for those who prioritize graphics over raw performance.