Revolution Idle
This combination offers playable performance with an average of 55 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 18 | 28 | 26 | 40 |
| 1440p QHD | 31 | 52 | 56 | 72 |
| 1080p Full HD | 55 | 82 | 84 | 113 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Revolution Idle with Intel Core i3-12100F + NVIDIA GeForce RTX 2060 SUPER, In-Depth Analysis
Revolution Idle is an idle game that places minimal graphical demands on a system, yet the measured frame rates for the Intel Core i3-12100F and NVIDIA GeForce RTX 2060 SUPER combination reveal a wide performance spread across resolutions and presets. The data indicates that this pairing is capable of delivering smooth gameplay at standard high refresh rate monitors, but struggles to maintain fluid motion at 4K with maximum settings. The following analysis breaks down the benchmark results, focusing on the interaction between the CPU, GPU, and the game's settings to determine the optimal configuration for this specific hardware.
FAQ
Q: What is the best resolution and settings combo for this hardware?
A: At 1920x1080 with Low settings, the combo achieves an average of 112.6 FPS, the highest measured result. However, a more balanced experience is found at 2560x1440 with High settings, which produces an average of 51.8 FPS, offering a significant resolution upgrade while remaining comfortably playable.
Q: How does the RTX 2060 SUPER perform at 4K resolution?
A: The data shows that 4K (3840x2160) is the weakest area for this GPU. At 4K High, the average frame rate is 27.6 FPS, and at 4K Ultra, it drops to 18.4 FPS. These figures are below the threshold for smooth gameplay, suggesting that 4K is not a viable option for this title with this card.
Q: What is the difference in performance between Low and Ultra settings at 1080p?
A: The jump from Low to Ultra at 1920x1080 results in a significant performance cost. The average frame rate drops from 112.6 FPS on Low to 54.7 FPS on Ultra, a reduction of more than half the frame rate, indicating that the Ultra preset is demanding for this GPU even at the lowest resolution.
Q: How does the CPU's single-thread performance compare to its multi-thread performance?
A: The CPU's benchmark scores show a strong single-thread capability relative to its multi-thread scores. For instance, it scores 1681 in Cinebench R23 single-core and 11912 in multi-core. This suggests the processor excels in tasks that rely on few cores, which is common for game logic.
Q: What is the ranking of this CPU+GPU combo among all tested configurations?
A: The combo ranks 1209 out of 1774 total tested combinations in Revolution Idle. This places it in the lower half of the performance distribution, indicating that while it is not a top-tier setup, it is far from the bottom of the list.
Q: Is the RTX 2060 SUPER's performance closer to the RTX 2070 or the GTX TITAN?
A: According to the benchmark data, the RTX 2060 SUPER has an average benchmark score of 19774. This is 0.5% higher than the RTX 2070's score of 19680 and 0.3% higher than the GTX TITAN's score of 19706, placing its raw compute performance directly between these two cards, but slightly closer to the TITAN.
Settings Recommendations
The measured FPS data suggests that the optimal experience depends heavily on the user's display resolution. For 1080p displays, the High preset at 81.9 FPS is the clear sweet spot, offering a substantial visual upgrade over Low (112.6 FPS) while maintaining frame rates well above the 60 FPS threshold. The Medium preset also performs well at 84.2 FPS, but High provides a better visual return for a negligible performance loss. The Ultra preset at 54.7 FPS is playable but sacrifices the fluidity that higher refresh rate monitors can provide.
For 1440p displays, the High preset at 51.8 FPS is the recommended starting point. While not hitting 60 FPS, it is a smooth and visually rich experience. The Medium preset at 56.1 FPS is a viable alternative for users who prioritize frame rate over maximum visual fidelity. The Low preset at 71.7 FPS is the best choice for competitive or high-refresh-rate play, but the visual downgrade is noticeable. The Ultra preset at 30.5 FPS is not recommended, as the visual gains do not justify the significant drop in smoothness.
At 4K resolution, none of the presets deliver an acceptable experience. The highest average frame rate is 40.1 FPS on Low, which is playable but not ideal. The High preset at 27.6 FPS and Medium at 26.1 FPS are both below the 30 FPS threshold for acceptable motion fluidity. The Ultra preset at 18.4 FPS is effectively unplayable. Users with 4K displays should strongly consider downscaling to 1440p to achieve a better balance of visual quality and performance. The data clearly shows that 1440p High is the most balanced configuration for this hardware, providing a strong mix of image clarity and performance.
GPU Role
The NVIDIA GeForce RTX 2060 SUPER is the primary driver of frame rate in Revolution Idle, as is typical for games with modest CPU demands. The GPU's 8 GB of GDDR6 memory on a 256-bit bus provides a 448.0 GB/s memory bandwidth, which is ample for this title's asset streaming. The GPU is based on the Turing architecture and features 2176 shading units, 136 texture mapping units, and 64 ROPs. Its boost clock of 1650 MHz and base clock of 1470 MHz allow it to reach a pixel rate of 105.6 GPixel/s and a texture rate of 224.4 GTexel/s.
The performance scaling across resolutions highlights the GPU's memory bandwidth and compute limitations. At 1080p, the GPU is less stressed, allowing it to push high frame rates; the difference between Low (112.6 FPS) and High (81.9 FPS) is significant but not extreme. However, as resolution increases to 1440p and then 4K, the pixel throughput demands rise sharply. The frame rate drops from 81.9 FPS at 1080p High to 51.8 FPS at 1440p High, and then to 27.6 FPS at 4K High. This demonstrates that the GPU is the limiting factor at higher resolutions, with its 7.181 TFLOPS of FP32 performance becoming insufficient for 4K rendering. The GPU's raw compute power is reflected in its benchmark scores, where it sits 0.5% above the RTX 2070 and 1.3% above the Tesla K40m in average score, showing it is a capable mid-range performer from its generation.
How This Combo Ranks
The Intel Core i3-12100F and NVIDIA GeForce RTX 2060 SUPER combo holds a rank of 1209 out of 1774 tested combinations in Revolution Idle. This places it in the 68th percentile of all tested systems, meaning it outperforms roughly two-thirds of the other configurations. This ranking is somewhat surprising given the game's low graphical demands, suggesting that the ranking is heavily influenced by the CPU's performance in other benchmarks, as the game itself is not likely to be a heavy GPU load.
The GPU's individual percentile is 63, meaning it performs better than 63% of all GPUs in the database. The CPU's percentile is higher at 72. This discrepancy suggests that the CPU is a relatively stronger component than the GPU in this pairing. The combo's rank of 1209 is a result of this balance, placing it below the top-tier systems that likely pair high-end CPUs with flagship GPUs. The data indicates that this is a solid mid-range setup, capable of handling the game with ease at 1080p and 1440p, but it is not a high-end configuration. The deltaPct values for the GPU's nearest rivals show it is very closely matched with the RTX 2070 (0.5% faster) and the GTX TITAN (0.3% faster), confirming its position in the market.
CPU Role
While the GPU handles the rendering, the Intel Core i3-12100F plays a crucial role in maintaining the frame rate, particularly at lower resolutions where the GPU is not the bottleneck. This processor features 4 cores and 8 threads, with a base clock of 3.30 GHz and a boost clock of 4.30 GHz. Its Alder Lake architecture and 12 MB of shared L3 cache provide solid single-thread performance, which is critical for game logic and physics calculations. The CPU's benchmark results, such as a Cinebench R23 single-core score of 1681 and a Geekbench single-core score of 2224, demonstrate its strength in this area.
The CPU's influence is most evident when comparing the performance deltas between Low and High settings at 1080p. The frame rate only drops from 112.6 FPS to 81.9 FPS, a 27% reduction, whereas the drop from 1080p High to 1440p High is a 37% reduction (from 81.9 to 51.8 FPS). This suggests that at 1080p Low, the CPU is capable of feeding the GPU enough data to reach 112 FPS, but it is not the primary limiter. The CPU's performance is more likely to be a factor in the minimum frame rates, which are not measured here, but the average FPS data shows it is sufficient for this game. With an average benchmark score of 13516 and a percentile of 72, it outperforms the Intel Core i7-7700K by 1.8% and the Core i3-10105 by 0.6%, making it a strong budget-conscious choice for a gaming build. The 58W TDP and dual-channel memory support round out a processor that provides no bottleneck for this GPU in this specific title.
Hardware Specifications
Intel Core i3-12100F
NVIDIA GeForce RTX 2060 SUPER
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i3-12100F + NVIDIA GeForce RTX 2060 SUPER in Revolution Idle
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 40.1 |
| 3840x2160 | High | 27.6 |
| 3840x2160 | Medium | 26.1 |
| 3840x2160 | Ultra | 18.4 |
| 2560x1440 | Low | 71.7 |
| 2560x1440 | Medium | 56.1 |
| 2560x1440 | High | 51.8 |
| 2560x1440 | Ultra | 30.5 |
| 1920x1080 | Low | 112.6 |
| 1920x1080 | Medium | 84.2 |
| 1920x1080 | High | 81.9 |
| 1920x1080 | Ultra | 54.7 |
Revolution Idle with ii3-12100F + Other GPUs
See how Revolution Idle performs with the same CPU but different graphics cards.
Revolution Idle with RTX 2060 SUPER + Other CPUs
See how Revolution Idle performs with the same GPU but different processors.
Other Games with ii3-12100F + RTX 2060 SUPER
Explore FPS benchmarks for other games using this same hardware combination.