Revolution Idle

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 2060 combination delivers a playable, though often constrained, experience in Revolution Idle. The measured data shows a system where the GPU is the primary performance limiter, with CPU headroom that becomes increasingly irrelevant as resolution and detail settings rise. This pairing sits at rank 1422 out of 1774 tested combos in this game, indicating a mid-to-low-tier standing for this title.

Resolution Scaling

The performance drop from 1080p to 4K is steep and consistent across all settings, confirming that the RTX 2060 is the bottleneck. At High settings, the average frame rate falls from 72.5 FPS at 1920x1080 to 44.6 FPS at 2560x1440, a reduction of roughly 38%. Moving to 3840x2160, the average plunges to 27.1 FPS, which is 63% below the 1080p figure. This pattern is mirrored at Low settings, where the transition from 101.5 FPS at 1080p to 63 FPS at 1440p represents a 38% drop, and then to 37.2 FPS at 4K, a further 41% decrease from the 1440p result.

The scaling behavior indicates that the RTX 2060’s memory bandwidth and compute resources are saturated early. The 6 GB GDDR6 memory on a 192-bit bus with 336.0 GB/s bandwidth is a limiting factor, as the pixel throughput requirements at 4K outstrip what the card can deliver. The CPU, with its 6 cores and 12 threads based on Zen 4 architecture, shows no signs of being the constraint; its benchmark scores, such as a Cinebench R23 multi-core score of 22799, suggest it can feed frames far faster than the GPU can render them at higher resolutions.

Notably, the gap between Low and High settings narrows as resolution increases. At 1080p, the difference between Low (101.5 FPS) and High (72.5 FPS) is 29 FPS. At 4K, the same settings gap shrinks to 10.1 FPS (37.2 vs. 27.1). This compression is a classic sign of GPU-bound operation; the cost of rendering a 4K frame dominates, making the shader complexity differences between presets less impactful. The data suggests that for a smoother experience at 4K, the user must accept the Low preset, while at 1080p, the CPU has enough headroom to support higher settings without a proportional frame rate penalty.

Settings Recommendations

The measured FPS rows indicate that the optimal balance between visual quality and performance depends heavily on the target resolution. At 1920x1080, the High preset delivers a smooth 72.5 FPS average, which is a solid baseline for a responsive experience. The Medium preset offers a marginal improvement to 77.2 FPS, but the jump to Low provides a substantial boost to 101.5 FPS, which is ideal for high-refresh-rate displays. The Ultra preset, at 48.6 FPS, is the only option that dips below the 60 FPS threshold, making it less desirable for a consistent feel.

For 2560x1440, the situation becomes more nuanced. The Low preset is the clear choice for maintaining fluidity, delivering 63 FPS. The Medium preset drops to 50.3 FPS, which is still playable but represents a 20% performance hit. High falls further to 44.6 FPS, and Ultra is a demanding 31.8 FPS. Given the data, users at 1440p should prioritize the Low preset to stay above 60 FPS, or accept Medium if they prefer visual fidelity over a strictly smooth frame rate.

At 3840x2160, none of the presets achieve a 60 FPS average. The Low preset is the only viable option for a semi-playable experience at 37.2 FPS. The High preset (27.1 FPS), Medium (24.5 FPS), and Ultra (16 FPS) are all below 30 FPS, which is generally considered the threshold for playable but choppy gameplay in a fast-paced title. For this idle game, which may not require twitch reflexes, the Low preset at 4K is the only recommendation, as the higher presets offer diminishing visual returns for a significant frame rate cost.

FAQ

*Q: What is the best resolution for this CPU and GPU combo in Revolution Idle?*

A: Based on the measured data, 1920x1080 is the only resolution where the system consistently exceeds 60 FPS across multiple presets. At 2560x1440, only the Low preset achieves 63 FPS, while at 3840x2160, all presets fall below 40 FPS.

Q: Is the AMD Ryzen 5 7500F holding back the RTX 2060 in this game?

A: No. The data shows a GPU-bound scenario, especially at higher resolutions. The CPU’s Cinebench R23 multi-core score of 22799 and single-core score of 3218 indicate ample processing power. The frame rate drops from 1080p to 4K are far larger than any CPU-induced bottleneck would cause.

Q: How significant is the performance difference between Low and Ultra settings?

A: The gap is substantial at 1080p, where Low (101.5 FPS) is 109% faster than Ultra (48.6 FPS). At 4K, the difference narrows to 132% (37.2 vs. 16 FPS), but this is because the GPU is so heavily taxed at that resolution that preset changes have a proportionally smaller effect.

Q: Should I use the Medium preset at 1440p?

A: The Medium preset at 2560x1440 yields 50.3 FPS, which is below the 60 FPS target. The Low preset gives 63 FPS, offering a smoother experience. If you prioritize frame rate, choose Low; if you prefer visual quality and can tolerate occasional dips, Medium is acceptable.

Q: Does the RTX 2060’s 6 GB VRAM cause issues in this game?

A: The benchmark results do not show a specific VRAM-related failure, but the 6 GB GDDR6 memory is a limiting factor for high-resolution textures. The 4K Ultra preset’s 16 FPS average suggests the card is overwhelmed, with memory bandwidth (336.0 GB/s) and capacity likely contributing to the poor performance.

Q: How does this combo rank relative to other tested systems?

A: This pairing is ranked 1422 out of 1774 combos in Revolution Idle, placing it in the bottom 20% of tested configurations. This is consistent with the GPU’s percentile rank of 58% against all GPUs, indicating it is a mid-range part that struggles with this game’s demands.

Measured FPS Breakdown

The complete set of measured average FPS values is as follows. At 1920x1080, the Low preset achieves 101.5 FPS, Medium reaches 77.2 FPS, High delivers 72.5 FPS, and Ultra drops to 48.6 FPS. Moving to 2560x1440, Low produces 63 FPS, Medium yields 50.3 FPS, High manages 44.6 FPS, and Ultra falls to 31.8 FPS. At 3840x2160, the results are 37.2 FPS for Low, 24.5 FPS for Medium, 27.1 FPS for High, and 16 FPS for Ultra.

These numbers reveal a consistent hierarchy: Low is always the fastest, followed by High, then Medium, with Ultra being the slowest at every resolution. The anomaly of High outperforming Medium at 4K (27.1 vs. 24.5 FPS) suggests potential driver or optimization quirks in the game, but the overall trend is clear. The data also shows that the largest absolute FPS gain from lowering settings occurs at 1080p, where moving from Ultra to Low yields a 52.9 FPS improvement. At 4K, the same change only recovers 21.2 FPS, reinforcing the GPU-bound nature of high-resolution rendering.

GPU Role

The NVIDIA GeForce RTX 2060 is the definitive performance limiter in this configuration. Its Turing architecture, built on a 12 nm process, features a base clock of 1365 MHz and a boost clock of 1680 MHz. The card’s 1920 shading units and 48 ROPs handle the rasterization workload, but the 6 GB GDDR6 memory on a 192-bit bus proves insufficient for this game’s demands at high resolutions. The memory clock runs at 1750 MHz, yielding an effective data rate of 14 Gbps and a bandwidth of 336.0 GB/s, which is a significant constraint when pushing 4K frames.

The GPU’s benchmark scores contextualize its performance. Its Passmark G3D score of 14111 places it in the 58th percentile of all GPUs, with an average benchmark score of 16074. The nearest rivals are the AMD Radeon RX 7600S (0.5% faster), AMD Radeon Pro 5600M (1.7% slower), and AMD Radeon Pro W5500 (1.8% slower). These close deltas indicate the RTX 2060 sits in a tightly contested mid-range tier. However, in Revolution Idle, the card’s limitations are exposed by the frame rate data, particularly the sub-30 FPS results at 4K across all presets.

The GPU’s compute capabilities, including 30 RT cores and 240 tensor cores, are largely irrelevant for this title, as the game’s rendering load appears to be fill-rate and bandwidth-bound rather than compute-bound. The pixel rate of 80.64 GPixel/s and texture rate of 201.6 GTexel/s are the relevant metrics, and they are simply not enough to maintain high frame rates at 4K. The card’s 160 W TDP and dual-slot design are standard, but the data shows that for this game, the RTX 2060 is a 1080p-class part, with 1440p requiring low settings for playable performance and 4K being a stretch even at the lowest quality level.