Revolution Idle

Revolution Idle is not a demanding title, but the measured data for the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4060 combination still reveals a clear performance hierarchy across resolutions. At 1920x1080 with Low settings, the combo produces 133 FPS average, which drops to 96 FPS at High, 101 FPS at Medium, and 61 FPS at Ultra. Moving to 2560x1440, the average frame rates are 84 FPS at Low, 64 FPS at Medium, 60 FPS at High, and 39 FPS at Ultra. At 3840x2160, the numbers fall further: 44 FPS at Low, 33 FPS at Medium, 32 FPS at High, and 20 FPS at Ultra. The scaling pattern is consistent: each step up in resolution reduces performance by roughly 30-40%, with the gap between Low and Ultra widening as pixel count increases.

The 1080p to 4K transition is particularly telling. At Low settings, the drop from 133 FPS to 44 FPS represents a 67% reduction, while at Ultra, the drop from 61 FPS to 20 FPS is a 67% reduction as well. This proportional decline suggests that neither component is a hard bottleneck at any single resolution; instead, the workload scales evenly with pixel throughput. However, the fact that even at 4K Low the combo manages 44 FPS indicates that the CPU is not the limiting factor at lower resolutions. At 1080p, the Ryzen 5 7400F with its 6 cores and 12 threads can feed the RTX 4060 well enough to reach triple-digit frame rates, but at 4K Ultra, the GPU's 8 GB of VRAM and 128-bit memory bus become the primary constraint. The measured data shows that the RTX 4060's compute resources—15.11 TFLOPS FP32 and 118.1 GPixel/s pixel rate—are sufficient for 1080p gaming but struggle to maintain fluid rates when pixel count quadruples.

The most significant frame rate cliff appears between Medium and Ultra at every resolution. At 1080p, Medium delivers 101 FPS while Ultra drops to 61 FPS, a 40% loss. At 1440p, the same settings transition drops from 64 FPS to 39 FPS, a 39% loss. At 4K, Medium gives 33 FPS while Ultra falls to 20 FPS, a 39% loss. This consistent ~40% penalty for moving from Medium to Ultra suggests that Ultra preset introduces effects that heavily tax the GPU's shading units and memory bandwidth. The RTX 4060's 272.0 GB/s bandwidth and 8 GB GDDR6 capacity are moderate by modern standards, and the Ultra preset likely pushes texture streaming and post-processing beyond what this GPU can handle gracefully at higher resolutions.

Resolution Scaling

The resolution scaling behavior of this combo in Revolution Idle follows a predictable pattern, but the magnitude of the drops varies by settings preset. At Low, the 1080p to 1440p transition costs 49 FPS (133 to 84, a 37% drop), while the 1440p to 4K transition costs 40 FPS (84 to 44, a 48% drop). At High, the 1080p to 1440p drop is 36 FPS (96 to 60, a 38% drop), and the 1440p to 4K drop is 28 FPS (60 to 32, a 47% drop). At Medium, the 1080p to 1440p drop is 37 FPS (101 to 64, a 37% drop), and the 1440p to 4K drop is 31 FPS (64 to 33, a 48% drop). At Ultra, the 1080p to 1440p drop is 22 FPS (61 to 39, a 36% drop), and the 1440p to 4K drop is 19 FPS (39 to 20, a 49% drop).

The data reveals that the 1440p to 4K transition is consistently more punishing than the 1080p to 1440p transition, regardless of settings. This is expected because 4K has 2.25 times the pixels of 1440p, while 1440p has 1.78 times the pixels of 1080p. However, the fact that the percentage drop for the 4K step is nearly identical across all settings (47-49%) indicates that the RTX 4060's memory subsystem—specifically its 128-bit bus and 272.0 GB/s bandwidth—is the uniform bottleneck. The GPU's 8 GB VRAM capacity also comes into play at 4K, as texture-heavy scenes can exceed this limit, causing swapping that reduces frame rates. At 1080p and 1440p, the VRAM is less likely to be saturated, which is why the scaling is more gradual.

The minimum FPS data available for Medium settings provides additional insight. At 1080p Medium, the minimum is 86 FPS against an average of 101 FPS, a 15% variance. At 1440p Medium, the minimum is 54 FPS against an average of 64 FPS, a 16% variance. At 4K Medium, the minimum is 28 FPS against an average of 33 FPS, a 15% variance. This consistent variance ratio across resolutions suggests that frame time spikes are proportional to the average performance level, which is typical for a GPU-bound scenario. If the CPU were the limiting factor, we would expect to see larger variance at lower resolutions where the CPU has more responsibility, but the data does not show that pattern.

How This Combo Ranks

The combination of the AMD Ryzen 5 7400F and NVIDIA GeForce RTX 4060 ranks 1551 out of 2986 tested combos in Revolution Idle, placing it in the 48th percentile of all combinations. This middle-of-the-pack ranking is somewhat surprising given the individual components' standings. The CPU alone sits in the 83rd percentile among all processors, with an average benchmark score of 32750, while the GPU lands in the 61st percentile among all graphics cards, with an average benchmark score of 17639. The discrepancy between these component-level percentiles and the combo's overall rank suggests that Revolution Idle does not heavily utilize the CPU's strengths, or that the GPU's moderate standing pulls the combined score down.

The CPU's nearest rivals in overall benchmark scores are the Intel Core i5-14600T with a score of 32707 (0.1% higher), the AMD Ryzen 7 PRO 6850H with a score of 32812 (0.2% higher), and the AMD Ryzen AI 7 PRO 360 with a score of 32662 (0.3% lower). These deltas are minuscule, meaning the 7400F is effectively tied with these processors in general compute tasks. However, in Revolution Idle specifically, the combo's rank of 1551 out of 2986 means that slightly more than half of all tested combinations outperform it. This indicates that the game's performance is more sensitive to GPU capabilities than CPU compute power, as many combos with weaker CPUs but stronger GPUs likely rank higher.

The GPU's nearest rivals in benchmark scores are the AMD Radeon HD 7790 with a score of 17666 (0.2% higher), the AMD Radeon 780M with a score of 17588 (0.3% lower), and the AMD Radeon Pro 560 with a score of 17551 (0.5% lower). These are older or integrated-class GPUs, yet they score within 1% of the RTX 4060 in aggregate benchmarks. This is notable because the RTX 4060 has a 115 W TDP and 3072 shading units, but its average benchmark score of 17639 places it just above the 61st percentile. In Revolution Idle, the combo's rank suggests that the game does not leverage the RTX 4060's modern features like ray tracing cores or tensor cores, which are present at 24 and 96 respectively, to any meaningful degree.

GPU Role

The NVIDIA GeForce RTX 4060's role in this combo is defined by its memory configuration and clock speeds. The GPU has 8 GB of GDDR6 memory on a 128-bit bus, providing 272.0 GB/s of bandwidth. Its base clock is 1830 MHz with a boost clock of 2460 MHz, and memory runs at 2125 MHz (17 Gbps effective). The measured FPS data shows that this GPU is capable of 133 FPS at 1080p Low, but drops to 20 FPS at 4K Ultra. The 8 GB VRAM capacity is likely the limiting factor at 4K Ultra, where high-resolution textures and effects can consume more than 8 GB, forcing the GPU to use slower system memory over PCIe 4.0 x8.

The RTX 4060's compute specifications include 3072 shading units, 96 TMUs, and 48 ROPs, with a pixel rate of 118.1 GPixel/s and a texture rate of 236.2 GTexel/s. These figures support the observed performance: at 1080p, the GPU can fill frames quickly enough to exceed 100 FPS at most settings, but at 4K, the 118.1 GPixel/s pixel rate becomes a hard ceiling. To achieve 60 FPS at 4K, the GPU would need to process 60 frames per second with roughly 8.3 million pixels per frame, totaling 497 million pixels per second. The RTX 4060's pixel rate is 118.1 billion pixels per second, which should theoretically handle this, but the actual measured 20-44 FPS at 4K indicates that pixel rate is not the only constraint—memory bandwidth and VRAM capacity play larger roles.

The GPU's transistor count of 18,900 million on a 159 mm² die (TSMC 5 nm) gives it a transistor density of 118.9 million per square millimeter. This density enables the 15.11 TFLOPS FP32 and FP16 (1:1) performance. In Revolution Idle, which is an idle game with relatively simple graphics, the FP32 performance is more than sufficient for the visual workload. The bottleneck is clearly the memory subsystem, as evidenced by the consistent ~40% penalty when moving from Medium to Ultra settings, which likely increases texture resolution and draw distance, both of which strain VRAM and bandwidth. The RTX 4060's 128-bit bus is half the width of higher-tier 40-series cards, and this limitation becomes apparent at higher resolutions.

Settings Recommendations

Based on the measured FPS data, the best experience in Revolution Idle with this combo is achieved at 1080p with High settings, which delivers 96 FPS average. This provides a smooth frame rate while maintaining visual quality above the Low preset. At 1080p Medium, the average is 101 FPS, which is only 5 FPS higher than High, suggesting that the High preset offers better visuals for a negligible performance cost. The Ultra preset at 1080p drops to 61 FPS, which is still playable but represents a 37% performance loss compared to High, with diminishing visual returns for an idle game.

At 1440p, the recommended settings are Medium, which delivers 64 FPS average with a minimum of 54 FPS. This is the only 1440p setting that remains above 60 FPS on average. High at 1440p produces 60 FPS average, which is borderline, while Low gives 84 FPS but sacrifices visual fidelity. Ultra at 1440p drops to 39 FPS, which is not smooth enough for comfortable gameplay. The 1440p Medium setting balances the GPU's capabilities with acceptable visual quality, and the 54 FPS minimum ensures that frame drops are not too jarring.

At 4K, no settings preset provides a truly smooth experience. Low achieves 44 FPS average, Medium 33 FPS, High 32 FPS, and Ultra 20 FPS. The Low preset is the only option that approaches playability, but even then, the frame rate is below the 60 FPS threshold. For users with a 4K display, the data suggests that this combo is not suitable for Revolution Idle at native resolution, and dropping to 1440p would be necessary for a better experience. Alternatively, users could accept the 44 FPS at 4K Low, but the min FPS data is not available for that setting, so the stability is unknown. The Medium preset at 4K has a minimum of 28 FPS, which indicates that frame pacing could be inconsistent.

Measured FPS Breakdown

The complete measured FPS data for this combo in Revolution Idle is as follows. At 1920x1080, the Low preset delivers 133 FPS average, Medium delivers 101 FPS average with a minimum of 86 FPS and a maximum of 116 FPS, High delivers 96 FPS average, and Ultra delivers 61 FPS average. At 2560x1440, Low delivers 84 FPS average, Medium delivers 64 FPS average with a minimum of 54 FPS and a maximum of 73 FPS, High delivers 60 FPS average, and Ultra delivers 39 FPS average. At 3840x2160, Low delivers 44 FPS average, Medium delivers 33 FPS average with a minimum of 28 FPS and a maximum of 38 FPS, High delivers 32 FPS average, and Ultra delivers 20 FPS average.

The data shows that the gap between Low and Medium settings is relatively small at each resolution. At 1080p, Low is 133 FPS and Medium is 101 FPS, a 24% difference. At 1440p, Low is 84 FPS and Medium is 64 FPS, a 24% difference. At 4K, Low is 44 FPS and Medium is 33 FPS, a 25% difference. However, the gap between Medium and High is much smaller: at 1080p, 101 FPS vs 96 FPS (5% difference); at 1440p, 64 FPS vs 60 FPS (6% difference); at 4K, 33 FPS vs 32 FPS (3% difference). This suggests that the High preset adds little visual overhead over Medium, making High a better choice when the frame rate can afford the negligible cost.

The largest performance cliff is between High and Ultra. At 1080p, the drop is from 96 FPS to 61 FPS, a 36% decrease. At 1440p, the drop is from 60 FPS to 39 FPS, a 35% decrease. At 4K, the drop is from 32 FPS to 20 FPS, a 38% decrease. The Ultra preset clearly introduces effects that are disproportionately expensive for the RTX 4060's hardware. Since Revolution Idle is an idle game, the visual difference between High and Ultra may not justify the substantial frame rate loss, especially at higher resolutions where even High settings cannot maintain 60 FPS.

FAQ

Q: What is the best resolution for this combo in Revolution Idle?

A: The measured data shows that 1080p is the only resolution where the combo achieves consistently high frame rates. At 1080p, all settings except Ultra exceed 90 FPS, with Low at 133 FPS, Medium at 101 FPS, and High at 96 FPS. At 1440p, only Medium and Low exceed 60 FPS, and at 4K, no preset reaches 60 FPS.

Q: How does the RTX 4060's 8 GB VRAM affect performance at 4K?

A: The 8 GB VRAM capacity is likely a limiting factor at 3840x2160, where the measured frame rates are 20-44 FPS depending on settings. The GPU's 128-bit memory bus and 272.0 GB/s bandwidth also contribute to the 4K performance drop, as the data shows a consistent 47-49% frame rate reduction when moving from 1440p to 4K across all settings.

Q: Is the Ryzen 5 7400F holding back the RTX 4060 in this game?

A: The combo ranks 1551 out of 2986 tested combinations, placing it in the 48th percentile. The CPU itself is in the 83rd percentile of all processors, so the bottleneck is likely the GPU. At 1080p Low, the combo achieves 133 FPS, which suggests the CPU can push higher frame rates, but the GPU's compute and memory limits prevent further gains.

Q: What settings preset should I use at 1440p?

A: The Medium preset at 2560x1440 delivers 64 FPS average with a minimum of 54 FPS, making it the only 1440p option that stays above 60 FPS on average. High at 1440p produces 60 FPS average, which is borderline, while Low gives 84 FPS but with reduced visual quality, and Ultra drops to 39 FPS.

Q: How does the Ultra preset compare to High in terms of frame rate?

A: The Ultra preset is significantly more demanding than High. At 1080p, Ultra delivers 61 FPS compared to High's 96 FPS, a 36% reduction. At 1440p, Ultra gives 39 FPS versus High's 60 FPS, a 35% reduction. At 4K, Ultra produces 20 FPS versus High's 32 FPS, a 38% reduction.

Q: Is this combo suitable for 4K gaming in Revolution Idle?

A: The measured data indicates that 4K performance is not smooth. Even at Low settings, the average frame rate is 44 FPS, which is below the 60 FPS threshold. The Medium preset at 4K has a minimum of 28 FPS, suggesting frame pacing issues. Users seeking 4K performance would need a more powerful GPU than the RTX 4060.