Revolution Idle

Revolution Idle is a genre outlier, and the measured results for the AMD Ryzen 5 3600 with the NVIDIA GeForce RTX 4060 reflect that. The benchmark data shows a combo that is heavily GPU-bound at high resolutions, yet exhibits surprising CPU headroom at 1080p. The ranking is mid-pack, but the experience is defined by how settings scale, not by raw component strength.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and reveals a clear GPU bottleneck. At High settings, the average frame rate falls from 96 FPS at 1920x1080 to 60 FPS at 2560x1440, then collapses to 32 FPS at 3840x2160. That is a 33% reduction from 1080p to 1440p, and another 47% reduction from 1440p to 4K. The pattern is consistent across all presets, indicating that the RTX 4060’s rendering throughput is the primary limiter as pixel count rises.

Low settings show the same trend but with higher absolute numbers: 133 FPS at 1080p, 84 FPS at 1440p, and 44 FPS at 4K. The delta between Low and High at each resolution is notable—37 FPS at 1080p, 24 FPS at 1440p, and 12 FPS at 4K—which suggests that graphical effects have a larger relative impact at lower resolutions where the GPU is less saturated. At 4K, the gap narrows because the GPU is already struggling to fill pixels, leaving little headroom for settings to matter.

Medium settings sit close to High: 101 FPS at 1080p, 64 FPS at 1440p, and 33 FPS at 4K. The only measured minimum and maximum values come from Medium at each resolution (86/116 at 1080p, 54/73 at 1440p, 28/38 at 4K), and the frame time spread widens with resolution, indicating increased variance under load. Ultra is the outlier, dropping to 61 FPS at 1080p, 39 FPS at 1440p, and 20 FPS at 4K—roughly half of High’s performance at every step.

The data indicates that 1080p and 1440p are viable for smooth play, but 4K is not. At 4K, even Low settings only reach 44 FPS, which is below the 60 FPS threshold. The limiting component is unequivocally the GPU: the CPU has ample headroom, as evidenced by the small FPS differences between Low and High at lower resolutions, which suggest that the RTX 4060’s shading units and memory bandwidth are the constraining factors once resolution scales.

CPU Role

The AMD Ryzen 5 3600 is a 6-core, 12-thread processor based on the Zen 2 architecture, with a base clock of 3.60 GHz and a boost clock of 4.20 GHz. Its benchmark profile shows strong multithreading for its class: Cinebench R23 multicore scores 15045, and Passmark multithread scores 17700. However, single-thread performance is more modest, with Cinebench R23 single-core at 2124 and 3DMark single-thread at 696.

In Revolution Idle, the CPU’s role appears secondary. The measured FPS at 1080p High (96 FPS) versus 1080p Low (133 FPS) shows a 37 FPS gap, but this is likely due to GPU workload reduction, not CPU limitation. The CPU’s 12 threads are more than adequate for an idle game, which typically has light simulation logic. The processor ranks in the 71st percentile among all CPUs, with an average benchmark score of 17035, placing it near the Intel Core i7-1260P (17007, +0.2% delta) and AMD EPYC 7742 (16998, +0.2% delta), while slightly behind the Intel Core i5-11400 (17067, -0.2% delta) and AMD EPYC 7573X (17070, -0.2% delta).

The 32 MB of shared L3 cache is a notable asset for game logic that juggles multiple state variables, but the data does not show any CPU-related bottlenecks. At 4K, the FPS drops are uniform across settings, which would not happen if the CPU were struggling—the GPU would still be the constraint. The 65W TDP and 7nm process node suggest thermal headroom, but benchmark results indicate that the Ryzen 5 3600 is not the star here; it simply provides enough compute to avoid stalling the GPU at lower resolutions.

GPU Role

The NVIDIA GeForce RTX 4060 is the dominant component in this pairing. It features 8 GB of GDDR6 memory on a 128-bit bus with 272.0 GB/s bandwidth, and its boost clock reaches 2460 MHz. The Ada Lovelace architecture provides 3072 shading units, 96 TMUs, and 48 ROPs, with a pixel rate of 118.1 GPixel/s and a texture rate of 236.2 GTexel/s. Its FP32 throughput is 15.11 TFLOPS.

The GPU’s benchmark scores are middling: Passmark G3D scores 19545, and 3DMark Steel Nomad DX12 scores 2302, placing it in the 61st percentile among all GPUs. Its nearest rivals include the AMD Radeon HD 7790 (17666, -0.2% delta) and AMD Radeon 780M (17588, +0.3% delta), showing that it sits in a competitive but not dominant position. The 8 GB VRAM is sufficient for the measured settings, but the 128-bit memory bus is a limiting factor at higher resolutions—this is evident in the 4K results, where bandwidth constraints likely contribute to the sub-45 FPS performance.

The RTX 4060’s role is clear: it defines the ceiling. At 1080p, the GPU can push over 130 FPS on Low settings, but at 4K, it falls to 20 FPS on Ultra. The 17 Gbps effective memory speed and 272.0 GB/s bandwidth are adequate for 1080p and 1440p, but the data shows that 4K demands more than this GPU can deliver. The 115W TDP and dual-slot design suggest efficiency, but the benchmark results are what matter: this is a 1080p/1440p card, not a 4K solution.

How This Combo Ranks

The combo ranks 1997 out of 3712 tested combinations, placing it in the middle of the pack. This is a lower ranking than the individual component percentiles might suggest (CPU at 71st percentile, GPU at 61st percentile), which indicates that Revolution Idle does not heavily reward high-end hardware. The game’s idle genre likely means that frame rates are not the primary metric for user satisfaction, but the measured data still provides a ranking.

At 1997th place, this combo sits slightly below the median. The nearest CPU rivals, such as the Intel Core i5-11400, have nearly identical average scores (17067 vs. 17035), meaning that swapping the CPU would yield negligible FPS changes. The GPU’s rivals, like the AMD Radeon 780M, also score similarly (17588 vs. 17639), but those are integrated or mobile parts, so the comparison is less direct.

The ranking suggests that this pairing is balanced but unremarkable. It outperforms the bottom half of combos, but it does not break into the upper quartile. The measured FPS at 1080p High (96 FPS) is solid, but not exceptional—many other combos likely achieve higher. The 4K performance (32 FPS on High) is below the threshold for smooth play, which drags the overall ranking down. For an idle game, this is acceptable, but for a benchmark database, it indicates that the RTX 4060 is the weak link at higher resolutions.

Settings Recommendations

The measured rows provide a clear hierarchy of presets. At 1920x1080, Medium settings offer the best balance: 101 FPS average with a minimum of 86 FPS and a maximum of 116 FPS. This is nearly identical to High (96 FPS), but with a wider frame time margin. Low settings hit 133 FPS, but the visual quality trade-off is unnecessary given that Medium is only 32 FPS slower. Ultra drops to 61 FPS, which is still playable but sacrifices 40 FPS for marginal visual gains.

At 2560x1440, Medium is again the sweet spot: 64 FPS average with a minimum of 54 FPS and a maximum of 73 FPS. High is close at 60 FPS, but the minimum frame rate is not measured, so Medium’s known variance (54-73 FPS) makes it the safer choice. Low hits 84 FPS, but Medium provides better fidelity for only 20 FPS less. Ultra falls to 39 FPS, which is below the 60 FPS target and should be avoided.

At 3840x2160, no preset achieves 60 FPS. Low is the best at 44 FPS, followed by Medium at 33 FPS (with a minimum of 28 FPS and a maximum of 38 FPS). High is at 32 FPS, and Ultra is at 20 FPS. The data suggests that 4K is not viable for this combo; the best experience is Low settings, but even that is marginal. For users prioritizing smoothness, 1440p Medium is the recommended preset, as it delivers 64 FPS with known frame times. For 1080p, Medium is optimal, offering 101 FPS with a wide margin above the minimum.

FAQ

Q: What is the best resolution for this combo?

A: The data shows that 1920x1080 and 2560x1440 are viable, with Medium settings at 1080p yielding 101 FPS and at 1440p yielding 64 FPS. 3840x2160 is not recommended, as even Low settings only reach 44 FPS.

Q: Does the CPU bottleneck the GPU in this game?

A: No. The measured FPS differences between Low and High settings at 1080p (133 vs. 96 FPS) are attributable to GPU load, not CPU limitations. The Ryzen 5 3600’s 12 threads and 32 MB L3 cache provide adequate headroom.

Q: How does the RTX 4060 compare to its nearest rivals?

A: The RTX 4060 has a Passmark G3D score of 19545, which is 0.2% lower than the AMD Radeon HD 7790 (17666) and 0.3% higher than the AMD Radeon 780M (17588). Its 8 GB VRAM and 128-bit bus are adequate for 1080p and 1440p, but not 4K.

Q: What settings should I use for a smooth 60 FPS experience?

A: At 1080p, Medium (101 FPS) or High (96 FPS) both exceed 60 FPS. At 1440p, Medium (64 FPS) is the only preset that reliably exceeds 60 FPS, while High (60 FPS) is borderline. Ultra at 1440p (39 FPS) and all 4K presets fall short.

Q: Why is 4K performance so poor?

A: The GPU is the limiting factor. At 4K, the RTX 4060’s 272.0 GB/s bandwidth and 8 GB memory are insufficient, as shown by the drop from 96 FPS at 1080p High to 32 FPS at 4K High. Even Low settings only reach 44 FPS at 4K.

Q: How does this combo rank overall?

A: The combo ranks 1997 out of 3712 tested combinations. This places it in the middle of the pack, reflecting that while the components are competent, they do not excel in Revolution Idle’s specific workload.