Red Dead Redemption 2

Red Dead Redemption 2

AVERAGE FPS
92
good

This combination provides smooth gameplay with an average of 92 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 40 56 67 90
1440p QHD 61 85 102 131
1080p Full HD 82 114 130 144

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 90
3840x2160 Medium 67
3840x2160 High 56
3840x2160 Ultra 40
2560x1440 Low 131
2560x1440 Medium 102
2560x1440 High 85
2560x1440 Ultra 61
1920x1080 Low 144
1920x1080 Medium 130
1920x1080 High 114
1920x1080 Ultra 82

Red Dead Redemption 2 with Intel Core i5-9400 + NVIDIA GeForce RTX 5070 Ti, In-Depth Analysis

The Intel Core i5-9400 paired with the NVIDIA GeForce RTX 5070 Ti produces a distinctive performance profile in Red Dead Redemption 2, one defined by a substantial GPU capability that is frequently tempered by the processor's older architecture. Benchmark results across three resolutions and four quality presets show a system that can deliver high frame rates at 1080p and 1440p, but which also exhibits a sharp drop-off at 4K Ultra that reveals the limits of this specific combination. The data indicates a pairing where the RTX 5070 Ti's raw power is often the primary driver of performance, yet the i5-9400's six-core, six-thread configuration imposes a ceiling in the most demanding scenarios.

Resolution Scaling

The measured FPS data shows how the performance burden shifts as resolution increases, providing clear evidence of where the bottleneck lies in this system. At 1920x1080 with Low settings, the combination achieves an average of 144 FPS, which is the highest recorded figure across the entire test matrix. Moving to 2560x1440 Low, the average drops to 131 FPS, a reduction of 13 FPS or approximately 9%. At 3840x2160 Low, the average falls further to 90 FPS, which represents a 31% decrease from the 1440p result and a 37.5% decrease from the 1080p result. This scaling pattern suggests that even at the lowest quality settings, the GPU is still managing the increased pixel count effectively, though with diminishing returns as resolution climbs.

The scaling behavior changes character when examining the High preset. At 1080p High, the average is 114 FPS; at 1440p High, it drops to 85 FPS (a 25.4% reduction); and at 4K High, it falls to 56 FPS (a 34.1% reduction from 1440p). The percentage drops between each resolution step are larger for High settings than for Low settings, which indicates that the added graphical complexity of the High preset amplifies the resolution penalty. This is a classic sign of a GPU-bound scenario, where the RTX 5070 Ti's rendering workload scales with both pixel count and shader complexity.

The most revealing data point for bottleneck analysis comes from the Medium preset, which includes minimum and maximum FPS values. At 1080p Medium, the average is 130 FPS with a minimum of 110 FPS and a maximum of 149 FPS. At 1440p Medium, the average falls to 102 FPS, with a minimum of 87 FPS and a maximum of 117 FPS. The gap between minimum and maximum FPS narrows as resolution increases, from a 39 FPS spread at 1080p to a 30 FPS spread at 1440p. This tightening of the frame time variance suggests that the CPU is less able to feed the GPU at higher resolutions, causing the frame rate to become more consistent but lower overall.

At 4K Ultra, the average FPS plunges to 40, which is a 34.4% drop from the 1440p Ultra result of 61 FPS. The 4K High result of 56 FPS is only 16 FPS higher than 4K Ultra, while at 1080p the difference between High and Ultra is 32 FPS (114 vs 82). This compression of performance headroom at 4K indicates that the system is hitting a hard wall, likely due to the CPU's inability to issue draw calls and manage the game's simulation fast enough to keep the GPU saturated. The data shows that the RTX 5070 Ti has ample headroom at lower resolutions, but the i5-9400 becomes the limiting factor when pixel count and quality settings both push the frame rate down.

Settings Recommendations

Based on the measured rows, the optimal experience balancing frame rate and visual fidelity depends heavily on the target resolution. For 1080p displays, the High preset at 114 FPS average provides a strong baseline, but the Medium preset at 130 FPS with a minimum of 110 FPS offers a more consistent high-refresh experience. The data shows that the jump from Medium to High costs 16 FPS on average, while the jump from High to Ultra costs 32 FPS, making Ultra a poor trade for the frame rate loss. For competitive or fast-paced play, the Low preset at 144 FPS is the clear choice, but for most users, Medium provides the best balance of visual quality and smoothness, as it maintains a minimum above 100 FPS.

At 1440p, the recommendation shifts toward High settings. The High preset delivers 85 FPS average, which is well within the range for a smooth experience on most 1440p monitors. The Medium preset at 102 FPS is also viable, but the visual quality difference between Medium and High is often substantial in a game like Red Dead Redemption 2, which relies heavily on environmental detail and lighting. The Ultra preset at 61 FPS is technically playable but sits close to the 60 FPS threshold, and the data shows that the cost of Ultra over High is 24 FPS, which is a significant sacrifice. The Low preset at 131 FPS is unnecessarily high, as the visual downgrade is not worth the extra frame rate at this resolution.

For 4K resolution, the measured data paints a challenging picture. The High preset at 56 FPS is the highest playable average, but it falls short of a locked 60 FPS. The Medium preset at 67 FPS is actually a better option, as it provides a higher average and a minimum of 57 FPS, which means it is more likely to stay above the 60 FPS threshold in lighter scenes. The Low preset at 90 FPS is the only 4K option that offers substantial headroom, but it sacrifices significant visual quality. The Ultra preset at 40 FPS is effectively unplayable for most users, as the frame rate is too low for smooth motion. Therefore, the data suggests that 4K Medium is the best choice for this combination, with 4K High as an acceptable alternative for those who prioritize visuals over frame rate stability.

FAQ

Q: What is the highest average FPS recorded for this combination?

A: The highest average FPS is 144, achieved at 1920x1080 resolution with Low settings.

Q: How does the 4K Ultra preset compare to the 1440p Ultra preset?

A: The 4K Ultra preset averages 40 FPS, while the 1440p Ultra preset averages 61 FPS. This represents a 34.4% reduction in average frame rate when moving from 1440p to 4K at Ultra settings.

Q: Is the RTX 5070 Ti the limiting factor at 1080p Low settings?

A: The data shows that at 1080p Low, the system achieves 144 FPS, which is notably higher than at 1440p Low (131 FPS) and 4K Low (90 FPS). This suggests that the GPU is not fully saturated at 1080p Low, and the CPU may be imposing a frame rate ceiling around the 144 FPS mark.

Q: What is the minimum FPS recorded for the Medium preset at 1440p?

A: The minimum FPS for the Medium preset at 2560x1440 is 87, with a maximum of 117 and an average of 102.

Q: How does the performance gap between High and Ultra settings change with resolution?

A: At 1080p, the difference between High and Ultra is 32 FPS (114 vs 82). At 1440p, the difference is 24 FPS (85 vs 61). At 4K, the difference is 16 FPS (56 vs 40). The gap narrows as resolution increases, indicating that the system becomes more constrained at higher resolutions.

Q: Can this combination maintain 60 FPS at 4K?

A: At 4K Medium, the average is 67 FPS with a minimum of 57 FPS, so it can exceed 60 FPS on average but may dip below in demanding scenes. At 4K High, the average is 56 FPS, which is below the 60 FPS threshold.

Measured FPS Breakdown

The complete set of measured frame rates provides a detailed view of how this system performs across the tested configurations. At 1920x1080, the Low preset leads with an average of 144 FPS. The Medium preset follows at 130 FPS, with a minimum of 110 FPS and a maximum of 149 FPS. The High preset averages 114 FPS, while the Ultra preset drops to 82 FPS. The progression from Low to Ultra shows a total reduction of 62 FPS, or 43%, from the peak value.

At 2560x1440, the Low preset averages 131 FPS. The Medium preset averages 102 FPS, with a minimum of 87 FPS and a maximum of 117 FPS. The High preset averages 85 FPS, and the Ultra preset averages 61 FPS. The reduction from Low to Ultra at 1440p is 70 FPS, or 53.4%, which is a steeper percentage drop than at 1080p, indicating that the GPU is carrying a heavier load as resolution increases.

At 3840x2160, the Low preset averages 90 FPS. The Medium preset averages 67 FPS, with a minimum of 57 FPS and a maximum of 78 FPS. The High preset averages 56 FPS, and the Ultra preset averages 40 FPS. The reduction from Low to Ultra at 4K is 50 FPS, or 55.6%, which is the largest percentage drop across all resolutions. This confirms that the 4K Ultra preset places the most severe demand on the system.

The Medium preset is the only configuration with complete min/max data across all three resolutions. At 1080p, the spread between minimum and maximum is 39 FPS; at 1440p, it is 30 FPS; and at 4K, it is 21 FPS. This narrowing spread suggests that frame time consistency improves as resolution increases, but at the cost of average performance. The data indicates that the 4K Medium preset is the most stable option for this combination, with a minimum FPS that is closer to the average than at lower resolutions.

GPU Role

The NVIDIA GeForce RTX 5070 Ti is the dominant component in this pairing, and its specifications explain much of the observed performance. The GPU features 16 GB of GDDR7 memory on a 256-bit bus, yielding a bandwidth of 896.0 GB/s. This memory configuration is well-suited to high-resolution gaming, as the 4K results show that the GPU can maintain playable frame rates at Medium and High settings. The 16 GB capacity is also a factor in the game's performance, as Red Dead Redemption 2's open world can be memory-intensive at higher resolutions.

The GPU's clock speeds are listed as a base of 2295 MHz and a boost of 2452 MHz. The boost clock is the relevant figure for sustained gaming loads, and the data shows that the RTX 5070 Ti can push high frame rates at lower resolutions. The 1080p Low result of 144 FPS suggests that the GPU is capable of exceeding 144 FPS, but the CPU may be limiting the output. The GPU's percentile ranking of 86 among all tested GPUs places it in the upper tier, and its average benchmark score of 49957 is close to that of the AMD Radeon RX Vega 64, which has a deltaPct of -0.1, and the Intel Arc A550M, which has a deltaPct of 0.4.

The GPU's architecture, Blackwell 2.0, and its process node of 5 nm are key factors in its efficiency, but the measured FPS data shows that the RTX 5070 Ti is not the primary bottleneck in this system at lower resolutions. The 4K results, particularly the Ultra preset at 40 FPS, suggest that the GPU is being underutilized due to CPU limitations. The GPU's FP32 performance of 43.94 TFLOPS and its pixel rate of 235.4 GPixel/s are more than sufficient for this game, indicating that the i5-9400 is the component holding the system back in the most demanding scenarios.

CPU Role

The Intel Core i5-9400 is a six-core, six-thread processor with a base clock of 2.90 GHz and a boost clock of 4.10 GHz. Its benchmark scores place it at the 47th percentile among all CPUs, with an average benchmark score of 2254. This is a mid-range processor by modern standards, and its nearest rivals include the Intel Core i7-1068NG7 (deltaPct -0.2), the Intel Core i7-10710U (deltaPct 0.3), and the AMD Ryzen 5 PRO 1500 (deltaPct 0.4). The i5-9400's lack of hyper-threading means it has six threads total, which can be a limitation in games that scale well beyond six threads.

The CPU's cache configuration includes 64 KB of L1 per core, 256 KB of L2 per core, and 9 MB of shared L3 cache. This is a modest amount of cache for a modern gaming CPU, but the data shows that it is not the primary limiting factor in most tested scenarios. The memory support is DDR4 with a dual-channel bus and a bandwidth of 42.7 GB/s, which is lower than the GPU's memory bandwidth by a factor of over 20. This disparity is typical, but it highlights the different roles of the two components.

In Red Dead Redemption 2, the CPU's role is to manage the game's simulation, AI, and draw calls. The measured FPS data shows that the i5-9400 becomes a bottleneck at 1080p Low, where the frame rate is capped at 144 FPS. This is likely due to the CPU's single-threaded performance, as its single-core scores are relatively modest (e.g., a Cinebench R23 single-core score of 935). At higher resolutions, the GPU takes on more of the workload, but the CPU's limitations are still visible in the 4K Ultra result of 40 FPS, which is significantly lower than what the RTX 5070 Ti should be capable of on its own.

How This Combo Ranks

The combination of the Intel Core i5-9400 and the NVIDIA GeForce RTX 5070 Ti ranks 622nd out of 3714 tested combinations in Red Dead Redemption 2. This places it in the top 16.8% of all tested systems, which is a respectable position given the CPU's age. The rank reflects the fact that the RTX 5070 Ti is a high-end GPU, but the i5-9400 prevents the system from reaching the very top tiers of performance.

The ranking is consistent with the measured FPS data, which shows strong performance at 1080p and 1440p but a significant drop-off at 4K Ultra. The combo's rank of 622 suggests that there are over 600 other combinations that perform better, many of which likely pair the RTX 5070 Ti with a more capable CPU. The data indicates that this system is well-suited for 1080p and 1440p gaming, where it can achieve high frame rates with most presets, but it is not optimized for 4K Ultra gaming.

The GPU's percentile ranking of 86 is much higher than the CPU's percentile ranking of 47, which confirms that the CPU is the weaker link in this pairing. The combo rank of 622 out of 3714 is a reasonable outcome for a system with such a disparate pair of components, but it also highlights the potential for improvement. Upgrading the CPU to a newer model with more cores and higher single-thread performance would likely move this combo significantly higher in the rankings, as the RTX 5070 Ti has demonstrated its capability in the measured data. For users who own this combination, the benchmark results suggest that targeting 1440p with High or Medium settings is the sweet spot, as it provides a good balance of visual quality and frame rate without pushing the CPU into a severe bottleneck.

Hardware Specifications

Intel Core i5-9400

Cores / Threads 6 / 6
Base Clock 2900 MHz
Boost Clock 4100 MHz
TDP 65W
Socket Intel Socket 1151
View Full CPU Details →

NVIDIA GeForce RTX 5070 Ti

VRAM 16 GB GDDR7
Base Clock —
Boost Clock 2452 MHz MHz
TDP 300 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i5-9400 + NVIDIA GeForce RTX 5070 Ti in Red Dead Redemption 2

Resolution Settings Avg FPS
3840x2160 Low 90.0
3840x2160 Medium 67.0
3840x2160 High 56.0
3840x2160 Ultra 40.0
2560x1440 Low 131.0
2560x1440 Medium 102.0
2560x1440 High 85.0
2560x1440 Ultra 61.0
1920x1080 Low 144.0
1920x1080 Medium 130.0
1920x1080 High 114.0
1920x1080 Ultra 82.0

Red Dead Redemption 2 with ii5-9400 + Other GPUs

See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.

Other Games with ii5-9400 + RTX 5070 Ti

Explore FPS benchmarks for other games using this same hardware combination.