Red Dead Redemption 2
This combination offers playable performance with an average of 44 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 24 | 33 | 41 |
| 1440p QHD | 28 | 41 | 44 | 63 |
| 1080p Full HD | 37 | 55 | 62 | 83 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core i5-9400 + AMD Radeon RX 6600, In-Depth Analysis
Red Dead Redemption 2 is a demanding title, and the data for the Intel Core i5-9400 + AMD Radeon RX 6600 combo shows a system that is heavily constrained by its graphics card at higher resolutions, while the CPU holds its ground at 1080p. The measured FPS figures reveal a clear pattern: this is a 1080p-oriented pairing that struggles to maintain playable frame rates as resolution climbs, with the gap between settings widening dramatically at 4K.
Resolution Scaling
The FPS drop from 1080p to 4K is steep and non-linear, which is typical for a GPU-bound title like Red Dead Redemption 2. At High settings, the average frame rate falls from 54.8 FPS at 1920x1080 to 41.0 FPS at 2560x1440, a reduction of roughly 25%. Pushing further to 3840x2160, the average collapses to 23.6 FPS, which is a 57% drop from the 1080p figure. This scaling pattern indicates that the Radeon RX 6600’s 8 GB of GDDR6 memory and 128-bit bus are simply overwhelmed by the pixel count at 4K.
The Low settings preset tells a similar story, though the absolute numbers are higher. At 1920x1080, the combo achieves 83.2 FPS, which is a very playable figure. At 2560x1440, it drops to 62.7 FPS, and at 3840x2160 it falls to 40.6 FPS. The 4K Low result is actually higher than the 1440p High result (40.6 vs 41.0), which suggests that reducing graphical complexity has a larger impact on performance than lowering resolution alone. This is a key insight: if you must play at 4K, dropping to Low settings yields a playable frame rate, but the visual compromise is severe.
The scaling between Medium and High settings is also telling. At 1080p, Medium produces 61.9 FPS while High produces 54.8 FPS, a difference of about 13%. At 1440p, the gap narrows to 7% (44.4 vs 41.0), and at 4K, Medium actually falls behind High (32.8 vs 23.6 is not a typo — wait, the data shows 32.8 for Medium and 23.6 for High at 4K, meaning Medium is faster than High, which is expected). The real outlier is Ultra, which at 4K delivers only 19.8 FPS, making it effectively unplayable. The data shows that the jump from High to Ultra is disproportionately expensive, costing about 35% performance at 1080p (54.8 to 36.5) and 43% at 1440p (41.0 to 27.7).
GPU Role
The AMD Radeon RX 6600 is the clear bottleneck in this pairing, particularly at resolutions above 1080p. Its specifications—8 GB of GDDR6 memory on a 128-bit bus with 224.0 GB/s bandwidth—are modest by modern standards. The boost clock of 2491 MHz and game clock of 2044 MHz are respectable, but the 1792 shading units and 64 ROPs are not enough to drive high frame rates at 1440p and 4K with demanding settings.
The GPU’s benchmark percentile (69th among all GPUs) places it in the upper-midrange, but the measured FPS data shows its real-world limits. In this game, the RX 6600’s 8 GB VRAM buffer is likely a limiting factor at 4K Ultra, where the 19.8 FPS average indicates the card is running out of memory bandwidth and fill rate. The texture rate of 279.0 GTexel/s and pixel rate of 159.4 GPixel/s are adequate for 1080p, but they cannot sustain the workload at higher resolutions.
The GPU’s nearest rivals in synthetic benchmarks are the AMD Radeon 890M (0.0% delta) and the AMD Radeon RX 6700M (0.2% delta), which shows that the RX 6600 is competitive with integrated and mobile parts in compute tasks. However, in a real game like Red Dead Redemption 2, the dedicated VRAM and drivers matter more than raw compute scores. The data suggests that the RX 6600 is best treated as a 1080p card for this title, with 1440p requiring Low settings to stay above 60 FPS.
CPU Role
The Intel Core i5-9400 is a six-core, six-thread processor with a base clock of 2.90 GHz and a boost clock of 4.10 GHz. It lacks hyper-threading, which is a potential weakness in CPU-bound scenes, but the measured FPS data shows that it is not the primary constraint in this game. At 1080p Low, the combo hits 83.2 FPS, which is a strong indicator that the CPU can feed the GPU adequately at lower resolutions.
The CPU’s synthetic benchmark scores—803 in Cinebench R15 multi-core and 7969 in Cinebench R23 multi-core—place it in the 50th percentile among all CPUs. Its nearest rival, the Intel Core i3-10305, scores 2300 with a delta of 0.2%, meaning the i5-9400 is essentially equivalent to that part in average benchmark score. The Xeon E-2134 is 0.4% behind, and the Core i7-8809G is 0.6% ahead. These tight margins indicate that the i5-9400 is a middle-of-the-pack CPU, but it has enough single-thread performance (113 in Cinebench R15 single-core) to avoid holding back the RX 6600 in most scenarios.
The lack of hyper-threading (6 threads total) could cause stutters in crowded scenes, but the average FPS data does not show evidence of this at 1080p. At 4K, the CPU’s load is lower because the GPU is the bottleneck, so the 6-core config is sufficient. The data indicates that upgrading the CPU would yield minimal gains at 4K, but at 1080p, a stronger CPU might help push the average FPS higher than 83.2 in Low settings.
How This Combo Ranks
In the database of tested combinations for Red Dead Redemption 2, this pairing ranks 1412 out of 1687 combos. That places it in the bottom 16% of all tested systems, which is a stark contrast to its individual component percentiles (CPU at 50th, GPU at 69th). The low combo rank suggests that while each component is mid-range, their combination is poorly suited for this specific game’s demands.
The rank of 1412 out of 1687 means that 275 other combinations perform worse, but 1411 perform better. This is a sobering statistic for a system with a dedicated GPU and a modern six-core CPU. The data implies that the RX 6600’s 8 GB VRAM and 128-bit bus are severe limitations in Red Dead Redemption 2, which is known for its high-resolution textures and open-world draw distances. The combo rank would likely improve significantly if the resolution were locked to 1080p, but as configured, it is a bottom-quartile performer.
FAQ
Q: Can this system run Red Dead Redemption 2 at 60 FPS?
A: Yes, but only at 1080p with Low settings, where it averages 83.2 FPS. At 1080p Medium, it drops to 61.9 FPS, and at High it falls to 54.8 FPS, so 60 FPS is achievable only with reduced settings.
Q: Is 4K playable with this combo?
A: Barely, and only on Low settings, which yields 40.6 FPS. High settings produce 23.6 FPS, Medium produces 32.8 FPS, and Ultra produces 19.8 FPS, all of which are below playable thresholds.
Q: Which is the bottleneck: CPU or GPU?
A: The GPU is the clear bottleneck at resolutions above 1080p. The FPS drop from 1080p to 4K is severe (from 54.8 to 23.6 at High), indicating the Radeon RX 6600 cannot handle the pixel load. The CPU’s 6-core config is sufficient to avoid being the primary limit.
Q: How does the Ultra preset compare to High?
A: Ultra is significantly more demanding. At 1080p, Ultra averages 36.5 FPS versus 54.8 FPS on High, a 33% reduction. At 1440p, Ultra delivers 27.7 FPS versus 41.0 FPS. The visual gain is not worth the performance cost.
Q: What is the best resolution for this combo?
A: 1920x1080 is the only resolution where the system can consistently exceed 50 FPS across most settings. At 1440p, only Low settings (62.7 FPS) provide a smooth experience, while High and Medium hover in the low 40s.
Q: How does this GPU compare to its closest rivals?
A: In synthetic benchmarks, the RX 6600 is within 0.2% of the AMD Radeon 890M and 0.2% ahead of the AMD Radeon RX 6700M. It is 0.5% behind the NVIDIA GeForce RTX 3060 Ti in average score, showing it is competitive in compute but not in this game’s specific workload.
Measured FPS Breakdown
At 1920x1080, the system delivers its best results. Low settings produce an average of 83.2 FPS, which is smooth and responsive. Medium settings drop to 61.9 FPS, still playable. High settings yield 54.8 FPS, which is acceptable but not ideal for fast-paced action. Ultra settings fall to 36.5 FPS, which is below the 60 FPS target and indicates that the Ultra preset is too demanding for this GPU at 1080p.
At 2560x1440, the performance takes a noticeable hit. Low settings average 62.7 FPS, which is the only preset at this resolution that stays above 60 FPS. Medium settings drop to 44.4 FPS, High to 41.0 FPS, and Ultra to 27.7 FPS. The gap between Low and Medium is 29%, showing that the Medium preset increases GPU load significantly.
At 3840x2160, the system is severely challenged. Low settings average 40.6 FPS, which is the only playable option. Medium settings drop to 32.8 FPS, High to 23.6 FPS, and Ultra to 19.8 FPS. The difference between Low and Ultra is over 50%, and none of the presets above Low achieve a consistent 30 FPS. The data suggests that 4K is only viable with the lowest graphical settings, and even then, the frame rate is marginal.
Hardware Specifications
Intel Core i5-9400
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-9400 + AMD Radeon RX 6600 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 40.6 |
| 3840x2160 | Medium | 32.8 |
| 3840x2160 | High | 23.6 |
| 3840x2160 | Ultra | 19.8 |
| 2560x1440 | Low | 62.7 |
| 2560x1440 | Medium | 44.4 |
| 2560x1440 | High | 41.0 |
| 2560x1440 | Ultra | 27.7 |
| 1920x1080 | Low | 83.2 |
| 1920x1080 | Medium | 61.9 |
| 1920x1080 | High | 54.8 |
| 1920x1080 | Ultra | 36.5 |
Red Dead Redemption 2 with ii5-9400 + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Other Games with ii5-9400 + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.