Red Dead Redemption 2
This combination may struggle with this title, averaging 26 FPS. Consider upgrading hardware or significantly lowering settings.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 13 | 17 | 18 | 21 |
| 1440p QHD | 19 | 25 | 29 | 35 |
| 1080p Full HD | 23 | 29 | 36 | 49 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core i5-12400F + AMD Radeon RX 580, In-Depth Analysis
The AMD Radeon RX 580 paired with the Intel Core i5-12400F delivers playable frame rates in Red Dead Redemption 2 only at 1080p with reduced settings, and the data shows a steep performance cliff as resolution and quality settings increase. The measured results place this combination at rank 1561 out of 1687 tested combos for this game, indicating it sits in the lower performance tier, yet the CPU’s strong synthetic scores suggest the graphics card is the primary constraint in most scenarios.
Resolution Scaling
The frame rate drop from 1080p to 4K is dramatic and reveals a GPU-bound workload. At High settings, the average FPS falls from 28.5 at 1920x1080 to 25.0 at 2560x1440, a modest 12.3% reduction, but then collapses to 17.4 at 3840x2160, representing a 38.9% drop from the 1440p figure. This pattern indicates that the RX 580’s memory bandwidth and pixel throughput are overwhelmed as pixel count increases, with the 4K resolution demanding more than four times the pixels of 1080p.
The scaling behavior across settings at 4K is particularly telling. Low settings yield 21.3 FPS, Medium drops to 18.0, High manages 17.4, and Ultra falls to 12.7. The gap between Low and Ultra at 4K is 40.4%, showing that quality settings have a substantial impact even when the resolution is already taxing the GPU. At 1080p, the same Low-to-Ultra spread is 51.5% (48.6 down to 23.0), which suggests the GPU has more headroom at lower resolutions to absorb the extra shading work.
The limiting component is clearly the GPU. The RX 580’s 256-bit memory bus and 256.0 GB/s bandwidth, combined with 32 ROPs, cannot sustain high fill rates at 4K. The pixel rate of 42.88 GPixel/s is insufficient for 3840x2160 at demanding settings, which explains why even Low settings only reach 21.3 FPS. The data indicates that 1080p is the practical ceiling for this configuration, and even there, only Low settings approach the 48.6 FPS mark.
GPU Role
The RX 580 is built on the Polaris 20 chip using GCN 4.0 architecture on a 14 nm process from GlobalFoundries. Its 5,700 million transistors and 232 mm² die size house 2304 shading units, 144 TMUs, and 32 ROPs. The GPU operates at a base clock of 1257 MHz with a boost of 1340 MHz, while the 8 GB of GDDR5 memory runs at 2000 MHz (8 Gbps effective) across a 256-bit interface. This configuration yields 6.175 TFLOPS of FP32 compute and a texture rate of 193.0 GTexel/s.
In Red Dead Redemption 2, the GPU’s 8 GB VRAM capacity is adequate for 1080p and 1440p, but the bandwidth becomes the bottleneck at higher resolutions. The benchmark scores reflect a mid-range position: the GPU’s average benchmark score of 13559 places it at the 53rd percentile of all GPUs. Its nearest rivals include the NVIDIA GeForce GTX 570 (scoring 13564, a 0% delta) and the GTX 950 (scoring 13549, a 0.1% delta), showing that the RX 580 sits in a tightly contested performance band.
The DirectX 12 benchmark score of 43 from PassMark is notably low, which matters for a game like Red Dead Redemption 2 that uses modern graphics APIs. The GPU supports DirectX 12 (12_0), OpenGL 4.6, and Vulkan 1.3, but the 3DMark Steel Nomad DX12 score of 1005 indicates limited headroom for next-generation rendering techniques. The measured FPS at 1080p Medium (36.3) and High (28.5) suggest that the GPU can handle the game’s geometry and textures at moderate settings, but Ultra settings at 23.0 FPS push beyond its comfortable operating range.
FAQ
Q: What is the best resolution for this CPU-GPU combination in Red Dead Redemption 2?
A: The data shows 1920x1080 as the only resolution where average FPS exceeds 40, specifically 48.6 FPS at Low settings. At 2560x1440, the highest average is 34.9 FPS (Low), and at 3840x2160, even Low settings only reach 21.3 FPS.
Q: How much performance is lost when going from 1080p to 1440p?
A: At High settings, the average FPS drops from 28.5 to 25.0, a 12.3% reduction. At Low settings, the drop is from 48.6 to 34.9, a 28.2% reduction, showing that lower settings amplify the resolution penalty.
Q: Does the RX 580 have enough VRAM for this game?
A: The GPU has 8 GB of GDDR5 memory with 256.0 GB/s bandwidth. Given that Ultra settings at 1080p produce 23.0 FPS and 4K Ultra produces 12.7 FPS, the capacity appears sufficient, but the bandwidth limit becomes apparent at higher resolutions.
Q: How does the RX 580 compare to its nearest GPU rivals?
A: The RX 580’s average benchmark score of 13559 is essentially tied with the NVIDIA GeForce GTX 570 (13564, 0% delta) and the GTX 950 (13549, 0.1% delta). It is 1.1% ahead of the AMD Radeon Pro 455 (13416) and 1.1% behind the NVIDIA P106-090 (13716).
Q: What settings should be used for a target of 30 FPS?
A: At 1080p, Medium settings achieve 36.3 FPS, which exceeds 30 FPS. At 1440p, Medium settings yield 28.8 FPS, just below the target. High settings at 1440p produce 25.0 FPS, so 1080p Medium is the highest quality setting that reliably hits 30 FPS.
Q: Is the CPU holding back the GPU in this game?
A: The CPU’s Cinebench R23 multicore score of 16518 and single-core score of 2332 indicate strong performance. The 3DMark single-thread score of 909 suggests adequate headroom. Given the GPU’s 53rd percentile ranking versus the CPU’s 77th percentile, the GPU is the limiting factor.
Measured FPS Breakdown
At 1920x1080, the settings ladder shows a clear progression. Low settings deliver 48.6 FPS average, Medium drops to 36.3, High falls to 28.5, and Ultra bottoms out at 23.0. The step from Low to Medium is a 25.3% reduction, while Medium to High is a 21.5% reduction, and High to Ultra is a 19.3% reduction. This indicates that each quality tier imposes a similar relative cost on the GPU.
Moving to 2560x1440, the performance envelope tightens. Low settings achieve 34.9 FPS, which is the only 1440p setting above 30 FPS. Medium produces 28.8 FPS, High yields 25.0, and Ultra drops to 19.2. The scaling from 1080p to 1440p at Low settings is a 28.2% reduction, but at Ultra settings, the reduction is 16.5% (from 23.0 to 19.2), suggesting that the GPU is already saturated at 1080p Ultra.
At 3840x2160, all settings produce sub-30 FPS results. Low achieves 21.3, Medium 18.0, High 17.4, and Ultra 12.7. The gap between Medium and High is only 3.3%, while the gap between High and Ultra is 27.0%. This non-linear scaling at 4K indicates that Ultra settings introduce effects that disproportionately tax the GPU’s 32 ROPs and 193.0 GTexel/s texture rate.
The overall dataset shows that the RX 580’s performance in this game is heavily dependent on resolution. At 1080p, the GPU can provide a playable experience at Low and Medium settings, with 48.6 and 36.3 FPS respectively. At 1440p, only Low settings clear 30 FPS. At 4K, no setting reaches 25 FPS, making the resolution impractical for this combination.
CPU Role
The Intel Core i5-12400F provides robust processing power that does not bottleneck the RX 580 in this title. This 6-core, 12-thread processor from the Core 12th Gen series uses the Alder Lake architecture with a base clock of 2.50 GHz and a boost clock of 4.40 GHz. Its 18 MB of shared L3 cache and 1.25 MB L2 per core help maintain consistent frame delivery in CPU-intensive scenes.
Synthetic benchmarks place this CPU well above the GPU in relative performance. The Cinebench R23 multicore score of 16518 and single-core score of 2332 demonstrate strong multi-threaded and single-threaded capability. The 3DMark scores show scaling from 909 (single-thread) to 5912 (max threads), with 2-thread at 1699, 4-thread at 3067, and 8-thread at 4779. This scaling pattern indicates efficient utilization of additional cores up to 6 cores, after which gains flatten.
The CPU’s average benchmark score of 19221 places it at the 77th percentile of all CPUs, with nearest rivals including the Intel Core i7-8700K (19210, 0.1% delta) and the AMD Ryzen 5 7533HS (19364, -0.7% delta). The PassMark multithread score of 19433 and single-thread score of 3481 reinforce that this processor has ample headroom for Red Dead Redemption 2’s game logic and physics.
Given that the GPU’s percentile (53rd) is significantly lower than the CPU’s (77th), the data strongly suggests that the RX 580 is the performance limiter. Even at 1080p Low settings, where the GPU produces 48.6 FPS, the CPU could likely drive higher frame rates if paired with a stronger graphics card. The CPU’s 65 W TDP and support for DDR4 and DDR5 memory make it a balanced partner, but the measured FPS values across all resolutions and settings consistently reflect GPU-bound behavior.
Hardware Specifications
Intel Core i5-12400F
AMD Radeon RX 580
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-12400F + AMD Radeon RX 580 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 21.3 |
| 3840x2160 | Medium | 18.0 |
| 3840x2160 | High | 17.4 |
| 3840x2160 | Ultra | 12.7 |
| 2560x1440 | Low | 34.9 |
| 2560x1440 | Medium | 28.8 |
| 2560x1440 | High | 25.0 |
| 2560x1440 | Ultra | 19.2 |
| 1920x1080 | Low | 48.6 |
| 1920x1080 | Medium | 36.3 |
| 1920x1080 | High | 28.5 |
| 1920x1080 | Ultra | 23.0 |
Red Dead Redemption 2 with ii5-12400F + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RX 580 + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with ii5-12400F + RX 580
Explore FPS benchmarks for other games using this same hardware combination.