Red Dead Redemption 2
This combination offers playable performance with an average of 45 FPS, though you may want to lower settings for smoother gameplay.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 20 | 29 | 32 | 42 |
| 1440p QHD | 30 | 39 | 49 | 66 |
| 1080p Full HD | 38 | 51 | 63 | 87 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with Intel Core i5-10400F + AMD Radeon RX 6600, In-Depth Analysis
The Intel Core i5-10400F and AMD Radeon RX 6600 combination produces a playable but heavily settings-dependent experience in Red Dead Redemption 2. The data shows this pairing lands at rank 1353 out of 1687 tested combos, placing it in the lower-mid tier of systems for this specific title. The 6-core, 12-thread processor with a base clock of 2.90 GHz and boost clock of 4.30 GHz provides solid multi-threaded headroom, evidenced by a Cinebench R23 multi-core score of 10297 and a PassMark multithread score of 12115. However, the benchmark results indicate that in this game, the GPU becomes the primary constraint at higher resolutions, while the CPU's single-thread performance—a Geekbench single-core score of 1454—keeps frame rates competitive at 1080p. The RX 6600, built on the RDNA 2.0 architecture with 8 GB of GDDR6 memory on a 128-bit bus, offers 224.0 GB/s of bandwidth, which proves sufficient for 1080p and 1440p but struggles to maintain fluid motion at 4K.
CPU Role
The Core i5-10400F brings six physical cores and twelve threads, a configuration that aligns well with Red Dead Redemption 2's engine demands. Its 3DMark scores reveal a scaling pattern: 1350 in the 2-thread test, 2560 in 4-thread, 3929 in 8-thread, and 4748 in 16-thread, indicating that the processor leverages additional cores effectively up to its full capacity. With a PassMark single-thread score of 2541, the CPU ranks in the 73rd percentile among all processors, meaning it outperforms roughly a quarter of the desktop market in general compute tasks. In this game, the CPU's role becomes most apparent at 1080p Low settings, where the average FPS reaches 87.3—the highest measured in the dataset—suggesting the processor can feed the GPU adequately when graphical load is light. The 12 MB of shared L3 cache and dual-channel DDR4 memory support with 42.7 GB/s bandwidth provide sufficient data throughput for the game's open-world streaming, though the processor's 14 nm process node and 65 W TDP indicate it is not a advanced part by modern standards. Compared to its nearest rivals, the i5-10400F sits within 1.2% of the AMD Ryzen 3 7320C and Intel Core i5-8500, with deltaPct values of -0.8 and -1.1 respectively, confirming that its compute power is competitive with those alternatives for this workload.
GPU Role
The AMD Radeon RX 6600 is the decisive component in this pairing, particularly as resolution increases. Its 8 GB of VRAM is adequate for 1080p and 1440p in Red Dead Redemption 2, but the 4K results—where High settings yield only 29.2 FPS and Ultra drops to 19.9 FPS—demonstrate that the 128-bit memory bus and 224.0 GB/s bandwidth become bottlenecks. The GPU's boost clock of 2491 MHz and game clock of 2044 MHz, combined with 1792 shading units and 64 ROPs, deliver a pixel rate of 159.4 GPixel/s and texture rate of 279.0 GTexel/s. These specifications translate to a PassMark G3D score of 15096, placing the GPU in the 69th percentile among all graphics cards. The nearest rivals for the RX 6600 include the AMD Radeon 890M with a deltaPct of 0, the RX 580 2048SP at -0.2, and the RTX 3060 Ti at 0.5, showing that this card is statistically indistinguishable from those in aggregate benchmark performance. In practical terms, the GPU's 8.928 TFLOPS of FP32 compute power is the ceiling for this system, and the data reveals that at 1440p High settings, the average FPS of 39.0 is only 24% higher than the 4K High result, indicating the card's memory bandwidth constraints become more pronounced at higher pixel counts.
Resolution Scaling
The FPS progression across resolutions tells a clear story about system balance. At 1080p Low, the combo achieves 87.3 FPS, but dropping to 1440p Low reduces that to 65.6 FPS—a 24.9% decrease—and 4K Low falls to 41.7 FPS, another 36.4% reduction from 1440p. This scaling pattern is characteristic of a GPU-limited scenario, where the RX 6600's fill rate and memory bandwidth are the determining factors. For Medium settings, the decline is steeper: 62.7 FPS at 1080p, 49.2 FPS at 1440p, and 32.0 FPS at 4K. The High preset shows 51.3 FPS at 1080p, 39.0 FPS at 1440p, and 29.2 FPS at 4K, with the 1080p-to-1440p drop of 24% closely mirroring the Low preset's relative decline. Ultra settings are the most demanding, yielding 38.1 FPS at 1080p, 29.8 FPS at 1440p, and 19.9 FPS at 4K. The consistent pattern—where each resolution step costs roughly 25-35% performance regardless of preset—confirms that the GPU is the limiting component across all tested configurations. The CPU's contribution is more visible at 1080p, where the 87.3 FPS Low result shows headroom exists, but the GPU's 8 GB VRAM capacity becomes a hard wall at 4K, particularly with Ultra settings that likely require more than the available memory.
FAQ
Q: What is the best resolution for this combo in Red Dead Redemption 2?
A: 1080p is the only resolution where the system consistently exceeds 60 FPS, achieving 87.3 FPS on Low and 62.7 FPS on Medium settings. At 1440p, even Low settings only reach 65.6 FPS, while High and Ultra fall below 40 FPS.
Q: How does the CPU compare to its closest rivals in synthetic benchmarks?
A: The i5-10400F has an average benchmark score of 14168, placing it 0.4% above the AMD EPYC 7552 (14115) and 0.8% below the AMD Ryzen 3 7320C (14277). It also trails the Intel Core i5-8500 by 1.1% and the AMD Ryzen Embedded V2546 by 1.2%.
Q: Is the RX 6600's 8 GB VRAM sufficient for 4K gaming?
A: No. The 4K results show average FPS ranging from 41.7 on Low to 19.9 on Ultra, indicating that the 128-bit memory bus and 224.0 GB/s bandwidth cannot sustain smooth gameplay at this resolution, likely due to both capacity and bandwidth limitations.
Q: What settings preset delivers the most balanced experience at 1080p?
A: Medium settings at 1080p produce 62.7 FPS, which is 22.4% higher than High settings (51.3 FPS) and only 28.2% lower than Low settings (87.3 FPS). This provides a 60 FPS baseline while maintaining visual fidelity above the minimum preset.
Q: How does the GPU's benchmark score compare to the RTX 3060 Ti?
A: The RX 6600 has an average benchmark score of 25235, while the RTX 3060 Ti scores 25120, giving the Radeon card a 0.5% advantage in aggregate performance metrics.
Q: Does the CPU bottleneck the GPU at any tested configuration?
A: At 1080p Low, the system reaches 87.3 FPS, which is the highest measured value, and the 3DMark 16-thread score of 4748 suggests the CPU has reserve capacity. The consistent FPS drops across all presets when moving from 1080p to 1440p indicate the GPU is the limiting factor, not the processor.
How This Combo Ranks
The combination ranks 1353rd out of 1687 tested combos in Red Dead Redemption 2, placing it in the bottom 20% of all systems evaluated. This ranking reflects the GPU's position in the 69th percentile among all graphics cards and the CPU's 73rd percentile standing, but the specific demands of this game—particularly its VRAM usage and shading complexity—expose the RX 6600's limitations more severely than synthetic benchmarks suggest. The gap between this combo and higher-ranked systems is substantial, as the 334 combos ranked below it likely feature older or lower-end hardware, while the 1352 combos above it benefit from more powerful GPUs or CPUs with higher memory bandwidth. In context, the combo's performance at 1080p Medium (62.7 FPS) is competitive with what many mid-range systems achieve, but the inability to maintain 60 FPS at 1440p High (39.0 FPS) keeps it firmly in the entry-to-mid tier for this title. The ranking also indicates that pairing this CPU with a stronger GPU would yield better results, as the processor's 12-thread performance is not the primary constraint in the measured data.
Measured FPS Breakdown
At 1920x1080, the system delivers 87.3 FPS on Low settings, 62.7 FPS on Medium, 51.3 FPS on High, and 38.1 FPS on Ultra. The step from Low to Medium costs 28.2% performance, while Medium to High costs 18.2%, and High to Ultra costs 25.7%, showing that each preset tier imposes a significant load increase. Moving to 2560x1440, the averages drop to 65.6 FPS (Low), 49.2 FPS (Medium), 39.0 FPS (High), and 29.8 FPS (Ultra). The 1440p results show that only Low settings approach 60 FPS, with a 24.9% reduction from the 1080p Low score. At 3840x2160, the system manages 41.7 FPS on Low, 32.0 FPS on Medium, 29.2 FPS on High, and 19.9 FPS on Ultra. The 4K Low result is 52.2% lower than the 1080p Low score, and the 4K Ultra result is 47.8% lower than the 1080p Ultra score, demonstrating that the GPU's memory bandwidth constraints amplify at higher pixel counts. Across all resolutions, the delta between Low and Ultra settings is consistent: 56.3% at 1080p, 54.6% at 1440p, and 52.3% at 4K, indicating that the relative cost of Ultra settings remains stable regardless of resolution.
Settings Recommendations
For players targeting 60 FPS, the only viable configuration is 1080p with Medium settings, which delivers 62.7 FPS and provides a comfortable margin above the 60 FPS threshold. At 1080p High, the 51.3 FPS average falls short of 60 FPS but remains smooth enough for most gameplay, while 1080p Low achieves 87.3 FPS but sacrifices visual quality. For those willing to accept lower frame rates, 1440p Medium at 49.2 FPS offers a good balance of image clarity and performance, though 1440p Low at 65.6 FPS is the better choice for maintaining smooth motion. The 4K resolution is not recommended for this combo, as even Low settings only reach 41.7 FPS, and the visual fidelity gains from 4K are undermined by the sub-30 FPS results on High and Ultra presets. The data suggests that the optimal experience is 1080p Medium, as it provides 60 FPS gameplay while retaining enough graphical detail to appreciate the game's art direction, and it leaves headroom for demanding scenes that may cause frame dips below the average. Players prioritizing visual quality over frame rate can use 1440p High at 39.0 FPS, but the 1080p Medium preset is the most balanced choice based on the measured results.
Hardware Specifications
Intel Core i5-10400F
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-10400F + AMD Radeon RX 6600 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 41.7 |
| 3840x2160 | Medium | 32.0 |
| 3840x2160 | High | 29.2 |
| 3840x2160 | Ultra | 19.9 |
| 2560x1440 | Low | 65.6 |
| 2560x1440 | Medium | 49.2 |
| 2560x1440 | High | 39.0 |
| 2560x1440 | Ultra | 29.8 |
| 1920x1080 | Low | 87.3 |
| 1920x1080 | Medium | 62.7 |
| 1920x1080 | High | 51.3 |
| 1920x1080 | Ultra | 38.1 |
Red Dead Redemption 2 with ii5-10400F + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RX 6600 + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with ii5-10400F + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.