Red Dead Redemption 2
This combination delivers exceptional performance with an average of 120 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 52 | 72 | 86 | 115 |
| 1440p QHD | 79 | 109 | 131 | 175 |
| 1080p Full HD | 105 | 146 | 175 | 197 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5090 D, In-Depth Analysis
The AMD Ryzen 7 5700 paired with the NVIDIA GeForce RTX 5090 D produces a distinctive performance profile in Red Dead Redemption 2, one that shifts character dramatically depending on the resolution and quality preset selected. The measured frame rates reveal a system that is overwhelmingly GPU-bound at 4K, yet shows signs of CPU limitation at 1080p with lower settings, where the frame rates approach levels that begin to test the processor's single-thread capabilities. This analysis walks through the data step by step, examining how the two primary components share the workload across the tested scenarios.
Resolution Scaling
The frame rate scaling from 1080p to 4K follows the expected pattern of a high-resolution GPU workload, but the magnitude of the drops reveals useful information about the bottleneck. At High settings, the transition from 1920x1080 to 2560x1440 reduces the average frame rate from 146 FPS to 109 FPS, a drop of 37 FPS or roughly 25%. Moving from 1440p to 4K (3840x2160) further reduces the average to 72 FPS, a decrease of 37 FPS again, representing another 34% reduction. This consistent absolute drop across both resolution steps suggests the GPU is scaling predictably with pixel count, as one would expect when the rendering load is the primary constraint.
The scaling behavior at lower settings tells a different story. At Low settings, the 1080p to 1440p transition sees a drop from 197 FPS to 175 FPS, only 22 FPS or about 11%. However, the step from 1440p to 4K at Low settings is much steeper, falling from 175 FPS to 115 FPS, a 60 FPS or 34% reduction. This non-linear scaling at Low settings is a classic indicator that the 1080p result is being held back by something other than the GPU — in this case, the CPU's ability to feed the frame pipeline. At 1080p Low, the system is likely approaching a CPU-imposed ceiling, which is why the 4K Low result (115 FPS) is proportionally closer to the 1080p Low result (197 FPS) than the pixel count alone would suggest.
At Medium settings, the scaling is more uniform. The 1080p result averages 175 FPS with a minimum of 149 FPS and a maximum of 202 FPS. Moving to 1440p Medium drops the average to 131 FPS (minimum 111 FPS, maximum 150 FPS), a 25% reduction. The 4K Medium result averages 86 FPS (minimum 74 FPS, maximum 99 FPS), another 34% reduction from 1440p. These consistent percentage drops indicate that the Medium preset keeps the workload balanced enough that the GPU remains the dominant limiting factor throughout the resolution range.
The Ultra settings show the smallest absolute frame rates, which is expected given the increased rendering complexity. At 1080p Ultra, the average is 105 FPS. This drops to 79 FPS at 1440p Ultra, a 25% reduction, and then to 52 FPS at 4K Ultra, a 34% reduction from 1440p. The fact that the percentage drops at Ultra closely mirror those at High and Medium suggests that even at the highest quality settings, the RTX 5090 D is still the primary bottleneck, with the CPU not becoming a limiting factor until frame rates climb much higher than what Ultra settings allow.
CPU Role
The AMD Ryzen 7 5700 is a Zen 3 architecture processor built on the Cezanne codename, featuring 8 cores and 16 threads. Its base clock is 3.70 GHz with a boost clock of 4.60 GHz, and it carries a TDP of 65 watts. The processor's benchmark scores place it in the 78th percentile against all CPUs, with an average benchmark score of 25517. Its nearest rivals in the database include the Intel Xeon D-2752TER with a delta of -0.1%, the AMD Ryzen 5 7640U with a delta of +0.1%, and the AMD Ryzen 5 6600H with a delta of -0.1%. These extremely small deltas indicate that the Ryzen 7 5700 sits in a tightly packed performance band where single-thread and multi-thread performance are both well balanced.
In Red Dead Redemption 2, the CPU's role becomes visible primarily at 1080p with lower settings, where the frame rates climb high enough to stress the processor. The single-thread benchmark scores are particularly relevant here: the 3dmark_single_thread score is 901, and the passmark_single_thread score is 3296. These are respectable but not exceptional numbers, and they correlate with the observed behavior at 1080p Low where the average frame rate of 197 FPS likely approaches the CPU's practical limit for this game engine. The 1080p Medium result of 175 FPS is lower than the Low result, which suggests that even with the additional GPU load of Medium settings, the frame rate is still partially influenced by CPU throughput.
The multi-thread performance of the Ryzen 7 5700 is strong for its class. The cinebench_r23_multicore score of 20655 and the geekbench_multicore score of 9959 both indicate that the 8-core, 16-thread configuration is well-suited to modern game workloads that can utilize multiple threads. Red Dead Redemption 2 is known to use multiple CPU cores for physics, AI, and streaming, and the 16 MB of L3 cache helps maintain smooth frame pacing. The memory bandwidth of 51.2 GB/s on a dual-channel DDR4 interface is adequate but not exceptional, and in a game like this one, that could contribute to the CPU appearing as a mild constraint at the highest frame rates.
The 3dmark_16_threads score of 6628 and 3dmark_8_threads score of 5585 suggest that the processor scales well up to 8 threads, with diminishing returns beyond that point. This aligns with the gaming performance observed, where the CPU can handle the game's thread demands without becoming a severe bottleneck, but it does not have the headroom to push frame rates significantly beyond the 197 FPS ceiling seen at 1080p Low.
GPU Role
The NVIDIA GeForce RTX 5090 D is a Blackwell 2.0 architecture GPU built on a 5 nm process, featuring 21,760 shading units, 680 texture mapping units, and 176 render output units. Its base clock is 2017 MHz with a boost clock of 2407 MHz, and it comes with 32 GB of GDDR7 memory on a 512-bit bus, providing a memory bandwidth of 1.79 TB/s. The GPU's benchmark scores place it in the 92nd percentile against all GPUs, with an average benchmark score of 77712. Its nearest rivals include the AMD Radeon RX 6650M XT with a delta of +1.1%, the AMD Radeon RX 6850M XT with a delta of -1.6%, and the NVIDIA Tesla P100 PCIe 12 GB with a delta of -2.1%. These deltas show that the RTX 5090 D is competitive with high-end mobile GPUs and professional workstation cards in synthetic benchmarks.
In Red Dead Redemption 2, the GPU is the dominant force across nearly all tested configurations. The 4K Ultra result of 52 FPS average is the lowest measured, and it reflects the massive rendering load that the game's highest quality settings place on even the most powerful GPUs. The 4K High result of 72 FPS is playable, while 4K Medium at 86 FPS offers a smoother experience. The 4K Low result of 115 FPS shows that the GPU still has substantial headroom even at 4K when settings are reduced.
The GPU's memory capacity of 32 GB is far beyond what Red Dead Redemption 2 requires, but the bandwidth of 1.79 TB/s is a more relevant factor. The game's open-world streaming benefits from high memory bandwidth, and the 512-bit bus ensures that texture streaming and draw calls are not starved for data. The pixel rate of 423.6 GPixel/s and texture rate of 1,636.8 GTexel/s are both exceptionally high, which explains why the GPU maintains strong frame rates at 1440p and 1080p even with Ultra settings.
The RTX 5090 D's benchmark results are notable for their consistency across APIs. The passmark_directx_12 score of 219 and the passmark_directx_11 score of 371 indicate that the GPU performs well in both modern and legacy graphics APIs, which is relevant for Red Dead Redemption 2's engine that primarily uses DirectX 12. The geekbench_vulkan score of 376915 and geekbench_opencl score of 310674 further confirm the GPU's compute capabilities, though these are less directly relevant to frame rate in this particular game.
FAQ
Q: What is the highest average frame rate achieved by this combo in Red Dead Redemption 2?
A: The highest measured average frame rate is 197 FPS, which occurs at 1920x1080 resolution with Low settings.
Q: How does the combo perform at 4K with Ultra settings?
A: At 3840x2160 with Ultra settings, the average frame rate is 52 FPS, which is the lowest measured result across all tested configurations.
Q: What is the minimum frame rate recorded at 1440p Medium settings?
A: At 2560x1440 with Medium settings, the minimum frame rate is 111 FPS, with a maximum of 150 FPS and an average of 131 FPS.
Q: Is the CPU or GPU the primary bottleneck at 1080p Low settings?
A: The data suggests the CPU becomes a limiting factor at 1080p Low, as the 197 FPS average is likely constrained by the Ryzen 7 5700's single-thread performance rather than the GPU, which could likely render more frames.
Q: What is the frame rate difference between High and Ultra settings at 1440p?
A: At 2560x1440, High settings produce an average of 109 FPS, while Ultra settings produce an average of 79 FPS, a difference of 30 FPS or approximately 28%.
Q: How does the 4K Medium result compare to the 1080p Ultra result?
A: The 4K Medium result averages 86 FPS, while the 1080p Ultra result averages 105 FPS, showing that the higher resolution with lower quality settings can still achieve reasonably high frame rates.
How This Combo Ranks
The AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5090 D combination ranks 46th out of 2902 tested combos for Red Dead Redemption 2, placing it in the top 1.6% of all configurations tested. This is a strong result, though it is worth remembering the ranking is based on overall performance across all tested resolutions and settings, which means the combo's high frame rates at 1080p and 1440p contribute positively to its position.
The 46th rank out of 2902 combos indicates that while this pairing is very capable, there are 45 other combinations that achieve higher overall scores in this game. Given that the RTX 5090 D is one of the most powerful GPUs available, the ranking is likely influenced by the CPU's mid-range position. The Ryzen 7 5700's 78th percentile ranking among all CPUs suggests that pairing a top-tier GPU with a mid-tier CPU does not yield the absolute best results in this game, but the combination still outperforms the vast majority of systems.
The data implies that the combo's ranking could be improved by pairing the RTX 5090 D with a stronger CPU, but the current configuration still delivers excellent playable frame rates at all tested resolutions. At 4K Ultra, the 52 FPS average is near the edge of smooth playability, but the 4K High and Medium results offer comfortable margins at 72 FPS and 86 FPS respectively.
Measured FPS Breakdown
At 1920x1080, the measured results show the following averages: Low settings produce 197 FPS, Medium settings produce 175 FPS with a minimum of 149 FPS and a maximum of 202 FPS, High settings produce 146 FPS, and Ultra settings produce 105 FPS. The spread from Low to Ultra is 92 FPS, which is the largest range of any resolution tested, indicating that the GPU has substantial headroom at 1080p but is partially constrained by the CPU at the lowest settings.
At 2560x1440, the results are: Low settings average 175 FPS, Medium settings average 131 FPS with a minimum of 111 FPS and a maximum of 150 FPS, High settings average 109 FPS, and Ultra settings average 79 FPS. The spread here is 96 FPS, slightly larger than at 1080p, which suggests that the GPU is becoming more dominant as the pixel count increases.
At 3840x2160, the results are: Low settings average 115 FPS, Medium settings average 86 FPS with a minimum of 74 FPS and a maximum of 99 FPS, High settings average 72 FPS, and Ultra settings average 52 FPS. The spread at 4K is 63 FPS, which is the smallest range, reflecting that the GPU is now the clear limiting factor across all settings.
The Medium preset is the only one that includes minimum and maximum frame rate data across all three resolutions. At 1080p, the minimum is 149 FPS and the maximum is 202 FPS, giving a range of 53 FPS. At 1440p, the minimum is 111 FPS and the maximum is 150 FPS, a range of 39 FPS. At 4K, the minimum is 74 FPS and the maximum is 99 FPS, a range of 25 FPS. The shrinking range as resolution increases is another indicator that the GPU becomes more dominant at higher resolutions, providing more consistent frame delivery.
Settings Recommendations
The measured data provides clear guidance for the optimal settings at each resolution. At 3840x2160, the Medium preset delivers an average of 86 FPS with a minimum of 74 FPS, which provides a smooth experience that stays comfortably above the 60 FPS threshold. High settings at 4K drop to 72 FPS average, which is still playable but offers less headroom, while Ultra settings at 52 FPS average risk dipping into less smooth territory during demanding scenes. For 4K, Medium settings offer the best balance of visual quality and frame rate stability.
At 2560x1440, the Medium preset averages 131 FPS with a minimum of 111 FPS, which is well above the refresh rate of most 1440p monitors. High settings at 109 FPS still provide excellent smoothness, and even Ultra at 79 FPS average is playable. For 1440p, High settings are recommended as they offer a substantial visual improvement over Medium while maintaining an average frame rate that exceeds 100 FPS.
At 1920x1080, the High preset averages 146 FPS, which is excellent for high refresh rate monitors. Ultra settings at 105 FPS average are also very playable and offer the best visual fidelity. The Medium preset at 175 FPS and Low at 197 FPS are only relevant for competitive play or extremely high refresh rate displays. For 1080p, Ultra settings provide the best experience, as the frame rate remains above 100 FPS while delivering the maximum visual quality the game offers.
Across all resolutions, the Medium preset provides the most consistent frame delivery, as evidenced by the narrower minimum-to-maximum range compared to other settings. The data shows that the RTX 5090 D has enough power to handle Ultra settings at 1080p and 1440p without issue, but at 4K, dropping to Medium or High is necessary to maintain frame rates above 70 FPS. The recommended approach is to use Ultra at 1080p, High at 1440p, and Medium at 4K for the optimal balance of visual quality and performance based on the measured results.
Hardware Specifications
AMD Ryzen 7 5700
NVIDIA GeForce RTX 5090 D
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 7 5700 + NVIDIA GeForce RTX 5090 D in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 115.0 |
| 3840x2160 | Medium | 86.0 |
| 3840x2160 | High | 72.0 |
| 3840x2160 | Ultra | 52.0 |
| 2560x1440 | Low | 175.0 |
| 2560x1440 | Medium | 131.0 |
| 2560x1440 | High | 109.0 |
| 2560x1440 | Ultra | 79.0 |
| 1920x1080 | Low | 197.0 |
| 1920x1080 | Medium | 175.0 |
| 1920x1080 | High | 146.0 |
| 1920x1080 | Ultra | 105.0 |
Red Dead Redemption 2 with Ryzen 7 5700 + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RTX 5090 D + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with Ryzen 7 5700 + RTX 5090 D
Explore FPS benchmarks for other games using this same hardware combination.