Red Dead Redemption 2
This combination provides smooth gameplay with an average of 66 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 31 | 40 | 45 | 63 |
| 1440p QHD | 43 | 61 | 71 | 91 |
| 1080p Full HD | 58 | 76 | 94 | 124 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Red Dead Redemption 2 with AMD Ryzen 5 5600X + NVIDIA GeForce RTX 3070, In-Depth Analysis
The AMD Ryzen 5 5600X paired with the NVIDIA GeForce RTX 3070 delivers a highly playable experience in Red Dead Redemption 2, though the data reveals a clear shift in bottleneck behavior as resolution increases. At 1080p, the combination produces a wide spread of frame rates that highlights the CPU’s strength, while at 4K, the GPU becomes the dominant constraint. The measured results show a consistent pattern: frame rates scale down by roughly half from 1080p to 4K at matching settings, with the gap between presets narrowing at higher resolutions—a signature of GPU-bound rendering.
Resolution Scaling
The frame rate drop from 1920x1080 to 3840x2160 is steep and consistent across all four quality presets. At Low settings, the average FPS falls from 123.7 at 1080p to 63.4 at 4K, a reduction of 60.3 frames per second. Medium settings see a similar proportional decline, dropping from 93.8 to 45.3, while High settings go from 75.9 to 40.1. Ultra settings show the smallest absolute loss, from 57.9 to 30.7, but that still represents a 27.2 FPS decrease. In percentage terms, the drop is roughly 48% to 52% across presets, indicating that the scaling is nearly linear with pixel count—a hallmark of a GPU-limited scenario at 4K.
The intermediate 2560x1440 resolution sits almost exactly halfway between the 1080p and 4K results. At High settings, the 1440p average of 60.8 FPS is nearly the midpoint between 75.9 and 40.1. This linearity suggests the rendering pipeline is not being artificially capped by CPU throughput at higher resolutions; instead, the GPU’s pixel fill rate and memory bandwidth are the limiting factors. The fact that the 4K High result (40.1 FPS) is closer to the 4K Ultra result (30.7 FPS) than to 4K Medium (45.3 FPS) implies that the High preset is already pushing the RTX 3070 into a region where additional quality settings have diminishing returns on frame rate, but still cost significant performance.
Interestingly, the 1080p results show a much wider spread between presets. The gap between Low (123.7 FPS) and Ultra (57.9 FPS) is 65.8 FPS, whereas at 4K that gap shrinks to 32.7 FPS. This compression at higher resolutions is the classic sign that the CPU is capable of feeding the GPU at 1080p, but the GPU’s workload dominates at 4K, making the frame rate less sensitive to preset changes. For users targeting 1440p, the data shows a balanced system where both components contribute, but the GPU still takes the lead role in determining final performance.
GPU Role
The RTX 3070’s specifications directly explain the 4K performance ceiling. With 8 GB of GDDR6 memory on a 256-bit bus, the card delivers 448.0 GB/s of bandwidth, which is sufficient for 1440p High settings (60.8 FPS) but becomes strained at 4K Ultra (30.7 FPS). The memory size is a critical factor: at 4K, texture-heavy scenes in Red Dead Redemption 2 can approach the 8 GB capacity, and the benchmark results suggest that the High preset (40.1 FPS) is the practical limit for maintaining playable frame rates without dropping below 40 FPS.
The GPU’s clock behavior also plays a role. The base clock of 1500 MHz and boost clock of 1725 MHz are modest for the Ampere architecture, but the 5888 shading units and 184 texture mapping units provide substantial compute throughput. The pixel rate of 165.6 GPixel/s and texture rate of 317.4 GTexel/s are the raw resources that drive the 4K results. The fact that 4K Low (63.4 FPS) is nearly double 4K Ultra (30.7 FPS) indicates that the card has headroom when texture and shader complexity are reduced, but the memory bandwidth becomes a bottleneck when higher-quality assets are loaded.
The GPU’s FP32 performance of 20.31 TFLOPS is substantial, yet the benchmark data shows that raw compute is not the limiting factor. Instead, the 8 GB memory capacity and 448.0 GB/s bandwidth are the constraining resources at 4K. This is evident because the 1440p results (60.8 FPS at High) are only 15% lower than the 1080p results (75.9 FPS at High), whereas the 4K results are 47% lower. The scaling penalty from 1440p to 4K is disproportionately large, which points to memory bandwidth saturation rather than compute exhaustion.
Settings Recommendations
Based on the measured rows, the optimal experience depends on the target resolution. At 1920x1080, the Medium preset (93.8 FPS) offers a substantial improvement over High (75.9 FPS) while remaining well above the 60 FPS threshold. The Low preset (123.7 FPS) is excessive for most displays, and Ultra (57.9 FPS) dips below 60 FPS, making Medium the best balance of visual fidelity and smoothness. The data shows a 17.9 FPS gain from High to Medium, which is a meaningful margin for competitive or high-refresh-rate play.
At 2560x1440, the High preset (60.8 FPS) is the sweet spot, as it maintains a 60 FPS average while providing better visual quality than Medium (70.8 FPS). The Medium preset offers a 10 FPS headroom, but the High preset’s result is already above the playable threshold. Ultra (43.2 FPS) is not recommended for 1440p, as the frame rate drops below 45 FPS, which can cause noticeable stutter in action sequences. The Low preset (90.6 FPS) is viable for users prioritizing frame rate over visuals, but the High preset’s 60.8 FPS average is sufficient for a smooth experience.
At 3840x2160, the Low preset (63.4 FPS) is the only option that consistently exceeds 60 FPS. Medium (45.3 FPS) and High (40.1 FPS) are playable but will exhibit frame pacing issues during intense scenes, while Ultra (30.7 FPS) is marginal at best. For a 4K display, the data suggests that Low settings are necessary for a locked 60 FPS experience, or users must accept Medium as a compromise between quality and performance. The High preset at 4K (40.1 FPS) offers little visual benefit over Medium (45.3 FPS) for a 5.2 FPS penalty, making Medium the better choice if 4K is a priority.
How This Combo Ranks
This combination ranks 763 out of 1687 tested combos in Red Dead Redemption 2, placing it in the upper-middle tier of all CPU-GPU pairings. The percentile position reflects the balance between the Ryzen 5 5600X and RTX 3070: the CPU is not the top performer, but it avoids bottlenecking the GPU at most resolutions. The rank of 763 suggests that roughly 45% of tested combos outperform this pairing, which is consistent with the RTX 3070 being an upper-midrange GPU rather than a flagship.
The CPU’s nearest rivals provide context for its contribution. The AMD Ryzen 5 5600GT scores 20740, a mere 0.3% higher than the 5600X’s 20680, indicating that the 5600X is at the top of its performance class. The Intel Core i7-10700 (20746) is similarly close, with a 0.3% delta, while the Intel Core i5-12490F (20794) is 0.5% faster. The only rival that trails is the Intel Xeon 6325P (20538), which is 0.7% slower. These tiny deltas mean the CPU is not the differentiator in this combo’s rank; the GPU’s performance tier is what determines the overall position.
On the GPU side, the RTX 3070’s nearest rivals show a tight cluster. The AMD Radeon RX 6600 XT (27985) is 0.9% slower, while the NVIDIA GeForce GTX 980 Ti (27956) is 1% slower. The AMD FirePro S7150 (28409) is 0.6% faster, and the Radeon R9 M295X (28541) leads by 1.1%. This clustering means the RTX 3070 is positioned in a crowded performance band, and the combo’s rank of 763 is more a function of the game’s specific engine behavior than raw hardware capability. The measured FPS data shows that this pairing is well-matched, as no single component severely limits the other across the resolution range.
CPU Role
The Ryzen 5 5600X’s six cores and twelve threads are adequate for Red Dead Redemption 2, but the game’s engine does not heavily leverage multi-threading. The CPU’s single-thread performance is strong, as evidenced by the 3dmark_single_thread score of 917 and the cinebench_r23_singlecore score of 2622. This is crucial because the game’s main thread likely determines the 1080p frame rate ceiling. The 1080p Low result of 123.7 FPS is a direct reflection of the CPU’s ability to issue draw calls and manage game logic without being a bottleneck.
The base clock of 3.70 GHz and boost clock of 4.60 GHz are typical for the Zen 3 architecture, and the 32 MB of L3 cache provides ample capacity for the game’s asset streaming. The 3dmark_max_threads score of 5588 shows that the CPU can scale to twelve threads, but the game’s utilization is likely limited to fewer threads. This is supported by the 3dmark_16_threads score of 5582, which is nearly identical to the max threads score, indicating that additional threads beyond 12 provide no benefit. The CPU’s percentile rank of 78 among all CPUs confirms it is well above average, but not elite.
The CPU’s role becomes less significant as resolution increases. At 4K, the frame rates are determined almost entirely by the GPU’s fill rate, and the CPU’s headroom is more than sufficient. However, at 1080p, the CPU is the limiting factor at Low and Medium settings, as the GPU is not fully utilized. The data shows that the 1080p Low result (123.7 FPS) is 1.6x higher than the 1440p Low result (90.6 FPS), which is less than the 2.25x pixel count increase, indicating that the CPU is preventing the GPU from reaching its full potential at 1080p. This is a classic CPU-bound scenario, and the Ryzen 5 5600X’s strong single-thread performance is what keeps the frame rates high. For users who play at 1080p with lower settings, the CPU is the star of the show, but at 4K, it fades into the background as the GPU takes over.
Hardware Specifications
AMD Ryzen 5 5600X
NVIDIA GeForce RTX 3070
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 5600X + NVIDIA GeForce RTX 3070 in Red Dead Redemption 2
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 63.4 |
| 3840x2160 | Medium | 45.3 |
| 3840x2160 | High | 40.1 |
| 3840x2160 | Ultra | 30.7 |
| 2560x1440 | Low | 90.6 |
| 2560x1440 | Medium | 70.8 |
| 2560x1440 | High | 60.8 |
| 2560x1440 | Ultra | 43.2 |
| 1920x1080 | Low | 123.7 |
| 1920x1080 | Medium | 93.8 |
| 1920x1080 | High | 75.9 |
| 1920x1080 | Ultra | 57.9 |
Red Dead Redemption 2 with Ryzen 5 5600X + Other GPUs
See how Red Dead Redemption 2 performs with the same CPU but different graphics cards.
Red Dead Redemption 2 with RTX 3070 + Other CPUs
See how Red Dead Redemption 2 performs with the same GPU but different processors.
Other Games with Ryzen 5 5600X + RTX 3070
Explore FPS benchmarks for other games using this same hardware combination.