Ready Or Not

# Ready Or Not: Intel Core i5-14400F + NVIDIA GeForce RTX 3070

The Intel Core i5-14400F paired with the NVIDIA GeForce RTX 3070 presents a well-balanced configuration for Ready Or Not, a tactical shooter where frame rate consistency matters as much as raw speed. Across the measured resolutions, this combination demonstrates a clear pattern: the GPU becomes the dominant constraint at 4K, while at 1080p the system delivers such high frame rates that the CPU's capabilities are pushed to their limits. The data shows this is a setup that can handle the game's demanding environments at high settings, though the gap between Low and Ultra presets widens dramatically as resolution increases.

Resolution Scaling

The measured FPS figures reveal a predictable yet significant scaling pattern as resolution drops from 4K to 1080p. At 3840x2160 with High settings, the system averages 77 FPS. Dropping to 2560x1440 at the same preset yields 153.7 FPS, a 99.6% improvement that suggests the GPU is the primary bottleneck at 4K. Moving further down to 1920x1080 produces 239.2 FPS, which is 55.6% higher than the 1440p result. This scaling behavior indicates that at 4K, the RTX 3070's computational throughput is the limiting factor, while at 1080p, the frame rates approach levels where the Core i5-14400F's single-thread performance begins to matter.

The Ultra preset tells a similar story but with steeper drops. At 4K Ultra, the system manages 55.5 FPS, which is 28% lower than the 4K High result. At 1440p Ultra, the average climbs to 109.1 FPS, and at 1080p Ultra it reaches 167.6 FPS. The percentage gains from 4K to 1440p at Ultra (96.6%) and from 1440p to 1080p (53.6%) are slightly less pronounced than at High, indicating that Ultra settings add enough GPU load to partially mask the resolution scaling benefits. The Low preset shows the most linear scaling: 101.5 FPS at 4K, 192.3 FPS at 1440p, and 301.3 FPS at 1080p, with nearly identical percentage improvements across each step.

This pattern strongly suggests that Ready Or Not is GPU-limited at 4K across all settings, but at 1080p Low, the 301.3 FPS figure approaches the practical ceiling for this CPU-GPU pairing. The data indicates that the limiting component shifts from the GPU at high resolutions to a more balanced CPU-GPU relationship at 1080p, where the Core i5-14400F's 10 cores and 16 threads are sufficient to keep the RTX 3070 well-fed.

GPU Role

The NVIDIA GeForce RTX 3070, based on the GA104 chip and built on Samsung's 8 nm process, is the workhorse for this game's rendering. With 8 GB of GDDR6 memory on a 256-bit bus, the card delivers 448.0 GB/s of bandwidth, which proves adequate for Ready Or Not's texture-heavy environments at 4K, as evidenced by the 77 FPS average at High settings. The GPU's boost clock of 1725 MHz and 5888 shading units contribute to its 20.31 TFLOPS of FP32 compute, a figure that directly correlates with the game's performance at higher resolutions.

The VRAM capacity is a notable factor in this analysis. At 4K Ultra, where texture detail and draw distances are maximized, the system drops to 55.5 FPS. While this could be partially attributed to compute load, the 8 GB frame buffer may also be a limiting factor at this resolution and preset combination. The 448.0 GB/s memory bandwidth handles the data throughput requirements, but the capacity constraint becomes more apparent as settings increase. The RTX 3070's 96 ROPs and 184 TMUs provide ample pixel and texture processing capability, which is reflected in the relatively small performance gap between High and Medium at each resolution.

The GPU's percentile ranking of 72 among all tested GPUs places it in a competitive position, though not at the top tier. In the context of Ready Or Not, the RTX 3070 demonstrates that it can deliver playable frame rates at 4K High, but the data shows that Ultra settings at 4K push the card to its limits, resulting in a 55.5 FPS average that may not satisfy users with high-refresh-rate 4K displays.

How This Combo Ranks

Within the database of 1,748 tested CPU-GPU combinations for Ready Or Not, this pairing ranks 820th. This places it in the 53rd percentile, indicating that a slight majority of tested configurations outperform it in this specific game. The mid-pack ranking is somewhat surprising given the individual component scores, but it reflects the game's particular optimization patterns and the balance between the Core i5-14400F and RTX 3070.

The CPU itself performs well above average, with a percentile ranking of 88 among all tested CPUs and an average benchmark score of 32,508. Its nearest rival, the Intel Core i7-12800H, scores 32,513 with a delta of 0%, showing that the i5-14400F is essentially on par with that mobile processor. The AMD Ryzen 5 PRO 7645 comes within 0.2% (32,446 average score), and the AMD Ryzen 7 250 is 0.2% ahead at 32,584. These near-identical scores indicate that the CPU is not the limiting factor in the combo's mid-pack ranking.

The GPU, with a percentile of 72 and an average benchmark score of 28,238, is slightly behind its nearest rival, the AMD FirePro S7150, which scores 28,409 with a -0.6% delta. The AMD Radeon RX 6600 XT trails by 0.9% at 27,985, while the NVIDIA GeForce GTX 980 Ti is 1% behind at 27,956. This GPU positioning suggests that the RTX 3070 is competitive but not exceptional in raw compute terms, which contributes to the combo's overall rank.

Measured FPS Breakdown

At 1920x1080, the system delivers its highest frame rates across all settings. Low averages 301.3 FPS, Medium 263.1 FPS, High 239.2 FPS, and Ultra 167.6 FPS. The gap between Low and Ultra at this resolution is 133.7 FPS, representing a 44.4% reduction. This indicates that even at Ultra, the system maintains frame rates well above the refresh rates of most 1080p monitors, making this resolution the most forgiving for this configuration.

Moving to 2560x1440, the averages are 192.3 FPS at Low, 166.9 FPS at Medium, 153.7 FPS at High, and 109.1 FPS at Ultra. The percentage drop from Low to Ultra at this resolution is 43.3%, slightly less than at 1080p, suggesting that the GPU is starting to become more of a factor. The 109.1 FPS at Ultra is still comfortably playable on 144Hz displays, though not on 240Hz panels.

At 3840x2160, the system averages 101.5 FPS at Low, 89.8 FPS at Medium, 77 FPS at High, and 55.5 FPS at Ultra. The drop from Low to Ultra is 45.3%, the steepest percentage decline across all resolutions. The 55.5 FPS at 4K Ultra is the only measured result below 60 FPS, indicating that this preset pushes the RTX 3070 to its absolute limit. The 77 FPS at High, however, demonstrates that the card can handle 4K gaming with reasonable settings adjustments.

Settings Recommendations

Based on the measured data, the High preset at 2560x1440 offers the best balance of visual quality and performance for most users, delivering 153.7 FPS. This frame rate comfortably exceeds the refresh rates of most 1440p monitors while maintaining a significant visual improvement over Medium settings. For users with 1080p displays, Ultra at 167.6 FPS is the recommended choice, as it provides the highest visual fidelity while still delivering frame rates far above typical 144Hz refresh rates.

At 4K, the High preset at 77 FPS is the practical ceiling for this configuration. The Ultra preset's 55.5 FPS falls below the 60 FPS threshold that many users consider the minimum for smooth gameplay, making it a poor choice for competitive play. The Medium preset at 89.8 FPS offers a viable alternative for users who prioritize frame rate over visual detail, though the jump from Medium to High is substantial enough to justify the performance cost for most players.

For users targeting maximum frame rates, the Low preset at 1080p delivers 301.3 FPS, which is ideal for high-refresh-rate competitive play. However, the visual compromises are significant, and the data suggests that the system's sweet spot is at 1440p High, where the 153.7 FPS average provides both excellent visual quality and frame rate headroom that accommodates scene complexity variations without dropping below playable levels.