Ready Or Not
This combination delivers exceptional performance with an average of 145 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 51 | 72 | 79 | 91 |
| 1440p QHD | 97 | 138 | 152 | 174 |
| 1080p Full HD | 154 | 219 | 241 | 276 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with Intel Core i5-12600KF + NVIDIA GeForce RTX 3060 Ti, In-Depth Analysis
# Ready Or Not: Intel Core i5-12600KF + NVIDIA GeForce RTX 3060 Ti
The Intel Core i5-12600KF paired with the NVIDIA GeForce RTX 3060 Ti delivers a performance profile that scales predictably across resolutions in Ready Or Not, with the combination ranking in the 49.4th percentile of all tested combos (1835th out of 3714). The data reveals a system that is strongly capable at 1080p and 1440p, but shows clear signs of GPU-bound limitations at 4K, particularly under higher graphics presets.
Resolution Scaling
The measured FPS data shows a consistent and expected decline as resolution increases from 1920x1080 to 3840x2160, but the magnitude of the drop varies significantly by settings preset. At Low settings, the average FPS falls from 276 at 1080p to 174 at 1440p (a 37% reduction), then to 91 at 4K (a 48% further reduction). This steep scaling curve at Low settings indicates that the RTX 3060 Ti is the primary limiting factor even at lower graphical loads, as the CPU has ample headroom to feed frames at these rates.
At Medium settings, the scaling pattern is similar: 241 FPS at 1080p drops to 152 FPS at 1440p (37% reduction), then to 79 FPS at 4K (48% reduction). The consistency of these percentage drops across Low and Medium settings suggests that the GPU's rendering throughput, rather than any CPU bottleneck, governs performance at these resolutions. The High preset tells a similar story with 219 FPS at 1080p, 138 FPS at 1440p (37% drop), and 72 FPS at 4K (48% drop).
Ultra settings exhibit the most dramatic scaling, with 154 FPS at 1080p falling to 97 FPS at 1440p (37% reduction) and then to 51 FPS at 4K (47% reduction). The fact that the percentage drop from 1440p to 4K remains nearly constant across all presets (47-48%) strongly indicates that the GPU is the limiting component across the board. If the CPU were the bottleneck, one would expect the scaling to flatten at higher resolutions where the GPU works harder, but the data shows no such leveling off.
The 1080p to 1440p transition shows the largest absolute FPS loss in every preset, averaging around 82 FPS across all settings. This suggests that the RTX 3060 Ti's memory bandwidth of 448.0 GB/s and its 256-bit bus are heavily taxed when pixel count increases by 78%. The 4K step, while representing another 125% increase in pixels, results in smaller absolute drops (around 65 FPS on average), which is consistent with the GPU already operating near its throughput ceiling at 1440p.
How This Combo Ranks
In Ready Or Not specifically, this combination ranks 1835th out of 3714 tested combinations, placing it just above the median of all tested systems. This percentile position (approximately 49.4%) is notably lower than what the individual components would suggest based on their standalone benchmark percentiles — the CPU sits at the 79th percentile against all CPUs, while the GPU sits at the 59th percentile against all GPUs. The gap between component-level rankings and the in-game combo ranking indicates that Ready Or Not's performance demands are not equally balanced across CPU and GPU resources.
The CPU's average benchmark score of 27799 places it within 0.3% of several close rivals: the Intel Core i9-10900K scores 27872 (0.3% higher), the AMD Ryzen 7 5800X3D scores 27896 (0.3% higher), and the AMD Ryzen 5 8500GE scores 27712 (0.3% lower). This clustering suggests that the i5-12600KF's computational throughput is essentially indistinguishable from these alternatives in synthetic benchmarks, yet the in-game ranking shows that the total system performance in Ready Or Not depends heavily on how the GPU interacts with this CPU.
On the GPU side, the RTX 3060 Ti's average benchmark score of 16129 places it near the AMD Radeon RX 9060 (16014, 0.7% lower) and the AMD Radeon Pro 5600M (16351, 1.4% higher). The GPU's 59th percentile ranking against all GPUs is respectable for a mid-range card, but in Ready Or Not, the combination's overall rank of 1835 out of 3714 suggests that many systems with slightly weaker GPUs but stronger CPUs may achieve better in-game results, or that the game is particularly sensitive to certain GPU features this card lacks.
The data indicates that this combo is best suited for 1080p and 1440p gaming in Ready Or Not, where it can leverage its strong CPU to drive high frame rates. At 4K, the combination falls to roughly half the 1080p performance at every preset, which aligns with the GPU's mid-range positioning in the overall GPU landscape.
Settings Recommendations
Based on the measured FPS data, the optimal settings preset depends heavily on the target resolution and desired frame rate. At 1920x1080, all four presets deliver playable frame rates, with even Ultra averaging 154 FPS. The Medium preset at 1080p delivers 241 FPS average with a minimum of 205 FPS, providing a substantial safety margin above typical 144Hz refresh rates while still offering improved visual quality over Low. For competitive play or maximum smoothness, Low at 1080p reaches 276 FPS average, which exceeds the refresh rate capabilities of most monitors.
At 2560x1440, the High preset delivers 138 FPS average, which is sufficient for 144Hz displays, while Ultra drops to 97 FPS average — still playable but with less headroom for demanding scenes. The Medium preset at 1440p offers 152 FPS average with a minimum of 129 FPS, making it the safest choice for maintaining consistently high frame rates on 144Hz monitors. Low at 1440p reaches 174 FPS, but the visual compromise may not be worth the additional 22 FPS over Medium.
At 3840x2160, the situation changes dramatically. Ultra drops to 51 FPS average, which is below the threshold for smooth gameplay in a tactical shooter where quick reactions matter. High at 4K delivers 72 FPS average, which is playable but not ideal for competitive play. Medium at 4K provides 79 FPS average with a minimum of 68 FPS, making it the best balance of visual quality and performance for 4K displays. Low at 4K reaches 91 FPS average, which is the only preset that fully utilizes 4K60 displays with significant headroom.
The data suggests that Medium is the sweet spot across all resolutions, as it consistently delivers roughly 10% higher frame rates than High while maintaining a minimum FPS that is within 15% of the average. For 1080p and 1440p users, High is a viable alternative if visual fidelity is prioritized, but for 4K, Medium is the recommended preset to avoid dropping below 60 FPS in demanding scenarios.
FAQ
Q: Can this system run Ready Or Not at 4K with playable frame rates?
A: Yes, but only at Medium settings or lower. The measured data shows Medium at 3840x2160 delivers 79 FPS average with a minimum of 68 FPS, while High drops to 72 FPS and Ultra falls to 51 FPS. For consistent 60+ FPS at 4K, Medium is the highest recommended preset.
Q: What is the best preset for 1440p gaming?
A: Medium at 2560x1440 provides 152 FPS average with a minimum of 129 FPS, which is ideal for 144Hz monitors. High delivers 138 FPS average but with a lower minimum that could dip below 120 FPS in heavy scenes. Ultra drops to 97 FPS, which is still playable but sacrifices the smoothness that Medium provides.
Q: How does the RTX 3060 Ti's 8 GB VRAM affect performance in this game?
A: The 8 GB GDDR6 memory with 448.0 GB/s bandwidth appears sufficient for all tested presets, as the frame rate scaling from Medium to Ultra at each resolution follows a consistent pattern without sudden drops that would indicate VRAM exhaustion. The GPU's 59th percentile ranking suggests it has adequate memory capacity for Ready Or Not's requirements.
Q: Is the CPU or GPU the bottleneck in this configuration?
A: The resolution scaling data clearly indicates the GPU is the limiting component. Frame rates drop by 47-48% from 1440p to 4K across all presets, which is a classic GPU-bound pattern. The CPU's 79th percentile ranking and 10 cores with 16 threads provide sufficient headroom, as evidenced by the consistent percentage drops regardless of settings.
Q: What frame rates can I expect at 1080p with Ultra settings?
A: The measured data shows 154 FPS average at 1920x1080 with Ultra settings. This is well above 144Hz refresh rates, though lower than the 241 FPS average achievable with Medium settings. The minimum FPS for Ultra is not reported, but the average suggests comfortable gameplay.
Q: How does this combo compare to systems with similar components?
A: The CPU's benchmark scores are within 0.3% of the Intel Core i9-10900K and AMD Ryzen 7 5800X3D, while the GPU's scores are within 1.4% of the AMD Radeon RX 5700 XT. In Ready Or Not, the combination ranks 1835th out of 3714, placing it near the median of all tested systems.
GPU Role
The NVIDIA GeForce RTX 3060 Ti is the dominant factor in determining Ready Or Not's performance across resolutions. With 8 GB of GDDR6 memory on a 256-bit bus providing 448.0 GB/s of bandwidth, the card has sufficient memory throughput for the game's demands, as evidenced by the smooth scaling between presets. The GA104 chip, built on Samsung's 8 nm process with 17,400 million transistors, operates at a base clock of 1410 MHz and boosts to 1665 MHz, with memory running at 1750 MHz (14 Gbps effective).
The GPU's compute capabilities include 4864 shading units, 152 texture mapping units, and 80 raster output pipelines, delivering 16.20 TFLOPS of FP32 performance and 253.1 GTexel/s of texture fill rate. These specifications place the card at the 59th percentile against all GPUs, with an average benchmark score of 16129. In Ready Or Not, the GPU's role becomes increasingly critical as resolution increases; the 47-48% frame rate drops from 1440p to 4K across all presets demonstrate that the card's pixel throughput and memory bandwidth are the primary constraints at higher resolutions.
The RTX 3060 Ti's 38 ray tracing cores and 152 tensor cores provide hardware acceleration for advanced rendering features, though the measured data does not isolate their impact on this game. The card's 8 GB VRAM capacity appears adequate for all tested settings, as no anomalous frame rate collapses occur at Ultra settings that would indicate memory swapping. The GPU's 200 W TDP and PCIe 4.0 x16 interface are standard for this performance class, and the card's 16.20 TFLOPS FP32 throughput provides a solid foundation for the frame rates observed in the benchmark data.
CPU Role
The Intel Core i5-12600KF provides substantial computational headroom that prevents CPU bottlenecks in Ready Or Not, particularly at lower resolutions. With 10 cores and 16 threads based on the Alder Lake architecture, the processor operates at a base clock of 3.70 GHz and boosts to 4.90 GHz, with 20 MB of shared L3 cache. The CPU's 79th percentile ranking against all processors, with an average benchmark score of 27799, places it in close competition with the Intel Core i9-10900K and AMD Ryzen 7 5800X3D, both within 0.3% in average scores.
The processor's single-thread performance is particularly strong, with a 3DMark single-thread score of 1016 and a Cinebench R23 single-core score of 3302. This is crucial for a tactical shooter like Ready Or Not, where game logic and AI decisions often rely on single-threaded performance. The multi-threaded capabilities are equally impressive, with a Cinebench R23 multicore score of 23391 and a 3DMark max-threads score of 7952, ensuring that background tasks and game engine threads do not compete for resources.
The evidence that the CPU is not the limiting factor comes from the resolution scaling analysis. At 1080p, where CPU load is typically highest relative to GPU load, the frame rates reach 276 FPS at Low settings — far beyond what most displays can show. The consistent 47-48% drops from 1440p to 4K across all presets confirm that the GPU, not the CPU, determines performance limits. The CPU's 125 W TDP and support for DDR4 and DDR5 memory provide flexibility, though the benchmark data does not indicate which memory type was used in testing. The 10 nm process node and 215 mm² die size suggest efficient power delivery, allowing the CPU to maintain boost clocks without thermal throttling that could impact frame pacing.
Measured FPS Breakdown
The complete FPS dataset for Ready Or Not with this configuration spans three resolutions and four settings presets, providing a comprehensive view of performance scaling.
At 1920x1080, the Low preset delivers the highest average frame rate at 276 FPS. The Medium preset achieves 241 FPS average with a minimum of 205 FPS and maximum of 277 FPS, showing tight frame pacing with only a 36 FPS spread between minimum and maximum. High settings produce 219 FPS average, while Ultra drops to 154 FPS average. The relative performance at 1080p shows that Medium is only 12.7% slower than Low, while Ultra is 36.1% slower than High.
Moving to 2560x1440, Low settings yield 174 FPS average, a 37% reduction from 1080p. Medium delivers 152 FPS average with a minimum of 129 FPS and maximum of 175 FPS, maintaining a consistent 46 FPS spread. High settings average 138 FPS, while Ultra produces 97 FPS average. The scaling from Medium to High at 1440p (9.2% reduction) is less severe than from High to Ultra (29.7% reduction), suggesting that Ultra settings impose a significant additional GPU workload.
At 3840x2160, Low settings average 91 FPS, Medium averages 79 FPS with a minimum of 68 FPS and maximum of 91 FPS, High averages 72 FPS, and Ultra drops to 51 FPS average. The 4K data reveals that Medium maintains a minimum FPS above 60, while High's average of 72 FPS leaves little margin for demanding scenes. Ultra at 4K is the only configuration that falls below 60 FPS average, indicating that this preset is not recommended for 4K gaming with this hardware combination.
Across all resolutions, the Medium preset consistently provides the best balance of average FPS and minimum FPS stability. The minimum-to-average ratio for Medium is 85% at 1080p (205/241), 85% at 1440p (129/152), and 86% at 4K (68/79), demonstrating consistent frame pacing regardless of resolution. This consistency makes Medium the most predictable preset for maintaining smooth gameplay in Ready Or Not.
Hardware Specifications
Intel Core i5-12600KF
NVIDIA GeForce RTX 3060 Ti
FPS Benchmarks by Resolution & Settings
Performance data for Intel Core i5-12600KF + NVIDIA GeForce RTX 3060 Ti in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 91.0 |
| 3840x2160 | Medium | 79.0 |
| 3840x2160 | High | 72.0 |
| 3840x2160 | Ultra | 51.0 |
| 2560x1440 | Low | 174.0 |
| 2560x1440 | Medium | 152.0 |
| 2560x1440 | High | 138.0 |
| 2560x1440 | Ultra | 97.0 |
| 1920x1080 | Low | 276.0 |
| 1920x1080 | Medium | 241.0 |
| 1920x1080 | High | 219.0 |
| 1920x1080 | Ultra | 154.0 |
Ready Or Not with ii5-12600KF + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 3060 Ti + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with ii5-12600KF + RTX 3060 Ti
Explore FPS benchmarks for other games using this same hardware combination.