Ready Or Not

Ready Or Not is a tactical shooter that stresses both CPU and GPU depending on the resolution and preset, and the data for the AMD Ryzen 9 9900X with the NVIDIA GeForce RTX 2060 shows a system that is clearly GPU-limited at higher settings. The Ryzen 9 9900X is a 12-core, 24-thread processor based on Zen 5 architecture with a boost clock of 5.60 GHz, placing it in the 94th percentile of all CPUs, while the RTX 2060 is a 6 GB GDDR6 card from the Turing generation with a boost clock of 1680 MHz, placing it in the 58th percentile of all GPUs. This pairing produces a wide spread of frame rates, from a very playable 1440p experience to a demanding 4K Ultra setting that pushes the GPU to its limits.

Resolution Scaling

The measured FPS data shows a steep performance drop as resolution increases, which is the classic signature of a GPU-bound scenario. At 1080p High, the system delivers 161.6 FPS, but moving to 1440p High drops this to 99.5 FPS, a reduction of roughly 38%. Going from 1440p to 4K High further reduces the average to 51.3 FPS, another drop of nearly 48%. This pattern is consistent across all settings presets, indicating that the RTX 2060 is the primary limiting factor as pixel count rises.

The scaling from Low to Ultra settings at each resolution reveals how much headroom the CPU has. At 1080p, the gap between Low (202.7 FPS) and Ultra (113.9 FPS) is 88.8 FPS, showing that the GPU is doing heavy lifting even at lower resolutions. At 4K, the same gap narrows to 32.5 FPS (70.3 FPS on Low vs 37.8 FPS on Ultra), which suggests that at 4K the GPU is so saturated that even dropping to Low settings cannot fully compensate for the pixel workload. This indicates that the Ryzen 9 9900X is never the bottleneck in this configuration; the RTX 2060's compute and memory bandwidth are what dictate the frame rate ceiling.

For a 1080p monitor, the system is overkill in the best way, easily pushing past 160 FPS on High and reaching 202.7 FPS on Low. At 1440p, the system remains highly capable, with High settings still clearing 99.5 FPS. However, at 4K, the frame rates drop below the 60 FPS threshold on High, meaning users with 4K displays will need to make significant compromises. The data shows a clear inflection point: 1440p is the practical ceiling for smooth gameplay on High settings, while 4K is only viable on Low or Medium presets.

GPU Role

The RTX 2060's role in Ready Or Not is defined by its 6 GB of GDDR6 memory on a 192-bit bus, providing 336.0 GB/s of bandwidth. This is a modest amount of VRAM by modern standards, and the benchmark results reflect that the card is working hard to maintain texture quality and geometry at higher resolutions. The GPU's boost clock of 1680 MHz and its FP32 performance of 6.451 TFLOPS are the raw compute resources that scale with resolution, and the measured FPS numbers show that these resources are exhausted at 4K Ultra.

The benchmark scores for the RTX 2060 place it at an average of 16074, with a Passmark G3D score of 14111. Its nearest rivals include the AMD Radeon RX 7600S (0.5% faster) and the AMD Radeon Pro 5700 (1.7% slower), which gives context for its position in the mid-range segment. In this game, the GPU's performance is the deciding factor between a 37.8 FPS 4K Ultra experience and a 129.1 FPS 1440p Low experience. The card's 6 GB VRAM is likely a contributor to the steep drop at 4K Ultra, as the higher preset demands more memory for textures, but the data does not isolate VRAM capacity from raw compute headroom.

The GPU's 30 RT cores and 240 tensor cores are present but not specifically highlighted in the measured FPS data, suggesting that Ready Or Not's standard presets do not heavily leverage ray tracing or DLSS in this test. The card's 160 W TDP and dual-slot design are typical for its class, and the measured results show that it performs as expected for a 58th-percentile GPU. Users should treat this card as a 1080p-to-1440p solution rather than a 4K powerhouse.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Ready Or Not?

A: The data shows that 2560x1440 on High settings achieves 99.5 FPS, which is the best balance of visual fidelity and smoothness. At 1080p High, the system hits 161.6 FPS, but 1440p provides a sharper image without dropping below 60 FPS.

Q: Can this system handle 4K in Ready Or Not?

A: Yes, but with limitations. At 4K Medium, the average FPS is 59.3, which is just playable, while 4K High drops to 51.3 FPS. For a consistent 60+ FPS experience, 4K Low (70.3 FPS) is the only viable preset.

Q: How does the RTX 2060 compare to its nearest rivals in this game?

A: The RTX 2060's average benchmark score is 16074, which is 0.5% faster than the AMD Radeon RX 7600S and 1.7% slower than the AMD Radeon Pro 5700. This suggests it is a solid mid-range performer, but not a standout.

Q: Is the Ryzen 9 9900X bottlenecking the RTX 2060?

A: No. The CPU's benchmark scores are in the 94th percentile of all CPUs, and the FPS scaling from 1080p to 4K is consistently GPU-bound. The CPU has ample headroom with 12 cores and a 5.60 GHz boost clock.

Q: What is the biggest performance drop between settings at 1440p?

A: The drop from Low (129.1 FPS) to Ultra (74 FPS) is 55.1 FPS, which is a 43% reduction. This is the largest gap at 1440p, highlighting the GPU's sensitivity to preset quality.

Q: How does this combo rank among all tested configurations?

A: This specific CPU/GPU combination ranks 1453 out of 1748 total combos tested for Ready Or Not. This places it in the lower half of all systems, but the measured FPS still shows playable performance at 1080p and 1440p.

Measured FPS Breakdown

At 1920x1080, the system delivers its best results. On Low settings, the average FPS reaches 202.7, which is exceptionally high. Medium settings produce 177.2 FPS, High settings yield 161.6 FPS, and Ultra settings drop to 113.9 FPS. This shows that even at the highest preset, the system stays well above 100 FPS, making 1080p a very comfortable experience for competitive or high-refresh-rate play.

Moving to 2560x1440, the performance remains strong but shows the GPU's workload increasing. Low settings average 129.1 FPS, Medium settings average 113.5 FPS, and High settings average 99.5 FPS. Ultra settings fall to 74 FPS, which is still playable but noticeably lower. The difference between High and Ultra at 1440p is 25.5 FPS, suggesting that the Ultra preset's additional effects are expensive on this GPU.

At 3840x2160, the system struggles to maintain high frame rates. Low settings average 70.3 FPS, Medium settings average 59.3 FPS, and High settings average 51.3 FPS. Ultra settings drop to 37.8 FPS, which is below the threshold for smooth gameplay. The data indicates that 4K is only viable on Low settings for a consistent 60+ FPS experience, and even then, the margin is thin.

CPU Role

The AMD Ryzen 9 9900X is a high-end desktop processor with 12 cores and 24 threads, based on the Zen 5 architecture (Granite Ridge). It has a base clock of 4.40 GHz and a boost clock of 5.60 GHz, with 64 MB of shared L3 cache. Its benchmark results are impressive: a Cinebench R23 multicore score of 46438 and a single-core score of 6555, placing it in the 94th percentile of all CPUs. Its nearest rivals include the AMD Ryzen 9 9900X3D (0.4% slower) and the Intel Core i7-14700F (0.7% faster), showing that it is a top-tier performer.

In Ready Or Not, the CPU's role is to feed the GPU with draw calls and game logic, and the data shows it does this without bottlenecking. The FPS differences between 1080p and 1440p are proportional to the pixel count, which would not be the case if the CPU were limiting. The CPU's high single-thread performance, evidenced by a Geekbench single-core score of 3341, is critical for this genre, as tactical shooters often rely on physics and AI calculations. The 3DMark 8-thread score of 9114 and max-thread score of 13929 indicate that the CPU can handle heavy multi-threaded workloads, but the game's frame rates are clearly dictated by the GPU.

The CPU's 24 threads and 5.60 GHz boost clock ensure that even at Low settings with high frame rates (202.7 FPS at 1080p), the CPU is not the limiting factor. This is a strong pairing for users who want to upgrade the GPU later, as the Ryzen 9 9900X has headroom to support a more powerful graphics card without needing a platform change.

Settings Recommendations

For a smooth and visually balanced experience, the data points to 1440p High as the optimal preset. This setting delivers 99.5 FPS, which is above the 60 FPS threshold and close to 100 FPS for most monitors. The visual quality at High is substantial, and the performance is stable enough for tactical gameplay where precision matters. For users with 1080p monitors, High (161.6 FPS) is the best choice, as it provides excellent visual fidelity without sacrificing the high frame rates needed for fast-paced action.

If a higher frame rate is a priority over visual fidelity, 1080p Medium (177.2 FPS) or 1440p Low (129.1 FPS) are strong alternatives. These presets sacrifice some shadows and texture detail but maintain exceptional smoothness. For 4K users, the only playable option is Low (70.3 FPS), but this compromises visual quality significantly. Medium at 4K (59.3 FPS) is barely playable, and High (51.3 FPS) is not recommended for a consistent experience.

Ultra settings are not recommended for this GPU in Ready Or Not. At 1440p Ultra, the frame rate drops to 74 FPS, which is a 25.5 FPS loss compared to High, and at 1080p Ultra, it drops to 113.9 FPS, which is still playable but 47.7 FPS slower than High. The performance cost of Ultra is not justified by the visual gains, especially when High provides a much smoother experience. The data suggests that High is the sweet spot for this hardware combination.