Ready Or Not

The AMD Ryzen 7 5700X3D paired with the NVIDIA GeForce RTX 2060 ranks 1395 out of 1748 tested combinations in Ready Or Not, placing it in the lower half of the database. This percentile position reflects a system that is functional but not competitive with higher-tier configurations, and the measured frame rates confirm a consistent theme: the RTX 2060 is the primary constraint across most settings and resolutions. The CPU, by contrast, delivers strong synthetic benchmark scores that suggest it has ample headroom for this tactical shooter, yet the combo's overall rank is dragged down by the GPU's limitations.

How This Combo Ranks

The combo rank of 1395 out of 1748 means the system sits in the 20th percentile of all tested combinations, which is a modest standing. For context, the CPU alone achieves an 82nd percentile ranking among all processors, while the GPU sits at a 58th percentile among all graphics cards. The gap between these two percentile values is telling: the processor is a far stronger component than the graphics card, and the overall combo rank is essentially dictated by the weaker link. Benchmark results indicate that this pairing is best suited for 1080p and 1440p gameplay, where the measured frame rates are respectable. At 4K, the system struggles to maintain high performance, and the rank reflects this limitation. The data shows that the CPU's synthetic scores, such as a Cinebench R23 multi-core result of 22366 and a Geekbench multi-core score of 10108, are far above what this game requires, but the GPU's Passmark G3D score of 14111 places it only slightly above average, making it the bottleneck in most scenarios.

GPU Role

The NVIDIA GeForce RTX 2060 is built on the Turing architecture with a TU106 chip, featuring 1920 shading units, 30 ray tracing cores, and 240 tensor cores. Its memory configuration includes 6 GB of GDDR6 on a 192-bit bus, delivering a bandwidth of 336.0 GB/s. The boost clock is rated at 1680 MHz, and the card's FP32 performance is 6.451 TFLOPS. In Ready Or Not, these specifications translate to a system that can handle the game's visual demands at lower resolutions but runs out of headroom when pushed to higher settings or 4K. The GPU's benchmark scores, including a Passmark G3D of 14111 and a 3DMark Steel Nomad DX12 score of 1242, show it performing near the middle of the pack. Its nearest rival, the AMD Radeon RX 7600S, scores 15996 on average, which is only 0.5% different, meaning the RTX 2060 is closely matched with that mobile part. However, the 6 GB VRAM capacity is a limiting factor in a game like Ready Or Not, which features detailed environments and numerous AI actors; at Ultra settings, the frame rate drops to 40.2 FPS at 4K, indicating the memory and compute resources are exhausted.

Resolution Scaling

The measured FPS data shows a clear pattern of performance degradation as resolution increases, with the CPU becoming less relevant and the GPU dominating the outcome. At 1920x1080 with High settings, the system achieves 165.1 FPS, which drops to 103 FPS at 2560x1440 and further to 57.2 FPS at 3840x2160. This represents a 37.6% reduction from 1080p to 1440p, and a 65.3% reduction from 1080p to 4K. The scaling is even more pronounced at Ultra settings: 113.4 FPS at 1080p falls to 70.9 FPS at 1440p and 40.2 FPS at 4K, a drop of 64.6% from the lowest resolution to the highest. The pattern indicates that the GPU is the limiting component, as the frame rate scales almost linearly with pixel count. At Low settings, the system hits 202.7 FPS at 1080p, which is a strong result, but even then, 4K performance drops to 71 FPS, showing that the RTX 2060 cannot maintain high frame rates at higher resolutions regardless of quality preset. The data suggests that for a smooth experience at 4K, the user would need to accept Low settings, and even then, the 71 FPS average is borderline for a fast-paced tactical shooter.

FAQ

Q: What is the best resolution for this combo to achieve over 100 FPS on High settings?

A: At 2560x1440 with High settings, the system achieves 103 FPS, which is the lowest resolution tested that maintains over 100 FPS on that preset. At 1920x1080, the same settings yield 165.1 FPS, providing a more comfortable margin.

Q: How does the RTX 2060 compare to its nearest rival in synthetic benchmarks?

A: The RTX 2060 has an average benchmark score of 16074, while the AMD Radeon RX 7600S scores 15996, a difference of only 0.5%. The Radeon Pro 5600M and Radeon Pro 5700 both score 16351, placing them 1.7% ahead of the RTX 2060.

Q: Is the Ryzen 7 5700X3D a bottleneck for this GPU in Ready Or Not?

A: No. The CPU's synthetic scores, such as a Cinebench R23 multi-core result of 22366 and a Passmark multithread score of 26318, are well above what the game requires. The frame rate drops from 1080p to 4K are consistent with GPU limitations, not CPU constraints.

Q: What frame rate can be expected at 4K with Medium settings?

A: The measured average FPS at 3840x2160 with Medium settings is 60.8 FPS. This is slightly above the 57.2 FPS at High settings but below the 71 FPS at Low settings.

Q: How does the CPU's single-thread performance compare to its multi-thread performance?

A: The Ryzen 7 5700X3D scores 3157 in Cinebench R23 single-core and 22366 in multi-core, showing a strong multi-thread advantage. Its 3DMark single-thread score is 804, while the 16-thread score is 6764, indicating that the CPU can handle both lightly and heavily threaded workloads effectively.

Q: What is the FPS difference between Low and Ultra settings at 1440p?

A: At 2560x1440, Low settings produce 126.4 FPS, while Ultra settings produce 70.9 FPS, a difference of 55.5 FPS. This shows that the GPU's performance scales significantly with quality presets at this resolution.

Settings Recommendations

For the best balance of visual quality and performance, the data points to Medium settings at 2560x1440 as the optimal choice. At this configuration, the system achieves 115.8 FPS, which is well above the 60 FPS threshold for smooth gameplay and only slightly lower than the 126.4 FPS at Low settings. The jump from Medium to High at 1440p results in a drop to 103 FPS, which is still playable but begins to approach the lower end of high-refresh-rate displays. At 1080p, Medium settings deliver 180.7 FPS, which is excellent for competitive play, while High settings at 165.1 FPS still provide a strong experience. For users who prioritize visual fidelity over frame rate, High settings at 1080p or 1440p are viable, but Ultra settings should be avoided except at 1080p, where the 113.4 FPS average is acceptable. At 4K, the data shows that only Low settings (71 FPS) provide a playable experience, while Medium (60.8 FPS) is borderline and Ultra (40.2 FPS) is not recommended for smooth gameplay.

CPU Role

The AMD Ryzen 7 5700X3D is an 8-core, 16-thread processor based on the Zen 3 architecture, with a base clock of 3.00 GHz and a boost clock of 4.10 GHz. It features a large 96 MB shared L3 cache, which is a key asset for gaming workloads that benefit from high cache capacity. The CPU's benchmark results are impressive: it achieves a Cinebench R23 multi-core score of 22366 and a single-core score of 3157, placing it in the 82nd percentile of all CPUs. Its nearest rival, the Intel Core i7-1360P, has an average score of 24627, which is only 0.2% different, indicating that the 5700X3D is competitive with newer mobile parts. In Ready Or Not, the CPU's role is to feed the GPU with enough data to maintain high frame rates, and the measured FPS at 1080p Low settings (202.7 FPS) shows that the processor is not a limiting factor. The combination of the 5700X3D's strong multi-thread performance and its 96 MB cache means that even in complex tactical scenarios with many AI actors, the CPU can keep up with the RTX 2060's output. The data supports the conclusion that any frame rate issues in this combo stem from the GPU, not the processor.