Ready Or Not

The AMD Ryzen 5 7500F and NVIDIA GeForce RTX 2060 pairing produces a configuration where the CPU’s modern architecture is held back by the GPU’s older Turing design. The data shows a processor that ranks in the 82nd percentile among all CPUs, while the graphics card sits in the 58th percentile among all GPUs. This imbalance is the defining characteristic of this combo in Ready Or Not, a tactical shooter where frame rates fluctuate significantly based on resolution and quality settings. The benchmark results indicate that at 1080p, the system delivers excellent playability, but the experience degrades rapidly as resolution increases, revealing a clear performance ceiling set by the graphics card.

CPU Role

The Ryzen 5 7500F is a 6-core, 12-thread processor built on the Zen 4 architecture using a 5 nm process. It operates with a base clock of 3.70 GHz and a boost clock of 5.00 GHz, with a 65 W TDP. This CPU features 32 MB of shared L3 cache and supports DDR5 memory on the AMD Socket AM5 platform. In synthetic benchmarks, its Cinebench R23 multicore score is 22799, while the single-core score is 3218. Its average benchmark score of 24993 places it just 0.1% ahead of the Intel Core i7-11850H and 0.4% ahead of the AMD Ryzen 9 6900HX, indicating it trades blows with those mobile parts.

For Ready Or Not, this processor is rarely the bottleneck at lower resolutions. At 1080p with Low settings, the combo achieves 204 FPS, which is more than enough to keep a high refresh rate display satisfied. The data suggests the CPU has ample headroom for the game’s AI and physics calculations, especially since its PassMark multithread score of 26825 shows strong parallel performance. However, the story changes at 4K. At 3840x2160 with Ultra settings, the average FPS drops to 38.6, a figure that is far below what the CPU could theoretically support. This indicates that the processor is waiting on the GPU to finish its work, rather than being the limiting factor itself.

GPU Role

The NVIDIA GeForce RTX 2060 is based on the Turing architecture with a TU106 chip, manufactured on a 12 nm process. It has 6 GB of GDDR6 memory on a 192-bit bus, providing a bandwidth of 336.0 GB/s. The card’s base clock is 1365 MHz with a boost clock of 1680 MHz, and it includes 1920 shading units, 30 RT cores, and 240 tensor cores. Its FP32 performance is rated at 6.451 TFLOPS, and its average benchmark score is 16074, which places it 0.5% ahead of the AMD Radeon RX 7600S and 1.8% ahead of the AMD Radeon Pro W5500.

The RTX 2060’s 6 GB VRAM is a critical constraint in Ready Or Not. The game’s texture-heavy environments and detailed character models demand significant memory, and the data shows that Ultra settings at 1440p yield 70.6 FPS, while stepping up to 4K Ultra collapses to 38.6 FPS. This drop is not linear with pixel count, suggesting that the card is running out of memory bandwidth or capacity. The GPU’s PassMark G3D score of 14111 indicates it is a mid-range part, and its performance in this game confirms that it is the primary limiter once resolution increases beyond 1080p.

Resolution Scaling

The measured FPS data reveals a steep performance curve as resolution scales from 1080p to 4K. At 1080p High, the combo produces 163.4 FPS, which is a strong result. Moving to 1440p High, the average drops to 102.4 FPS, a reduction of roughly 37%. At 4K High, the average falls to 56.6 FPS, which is a further 45% drop from 1440p. This pattern shows that the GPU is being progressively overwhelmed by the increasing pixel workload.

Looking at the Low settings preset, the scaling is even more telling. At 1080p Low, the system hits 204 FPS, but at 1440p Low it falls to 129.1 FPS, and at 4K Low it lands at 66.2 FPS. The fact that even Low settings at 4K cannot maintain 70 FPS indicates that the RTX 2060 is simply not powerful enough for 4K gaming in this title. The limiting component is clearly the GPU, as the CPU’s performance would not explain such drastic FPS drops when the graphical load is reduced. The data shows that 1440p is the practical ceiling for this combo, and even there, Ultra settings drop to 70.6 FPS, which is playable but not ideal for a tactical shooter where reaction time matters.

How This Combo Ranks

This specific combination of the Ryzen 5 7500F and RTX 2060 ranks 1426 out of 1748 tested combos in Ready Or Not. This places it in the bottom 18% of all configurations tested, which is a notable finding given the CPU’s strong individual performance. The rank reflects the GPU’s inability to keep pace with the processor, creating a situation where the system’s overall capability is dragged down by its graphics component.

The combo’s rank is worse than what either component achieves on its own. The CPU’s percentile rank of 82 suggests it is a high-performing part, but the GPU’s percentile rank of 58 indicates mediocrity. When paired, the result is a system that performs adequately at 1080p but struggles at higher resolutions. For context, the CPU’s nearest rival, the Intel Core i7-11850H, is within 0.1% of its average score, but that does not translate to better gaming performance here because the GPU is the bottleneck. The data indicates that users would see significant gains from pairing this CPU with a stronger GPU, as the processor clearly has untapped potential in this game.

FAQ

Q: Can this combo run Ready Or Not at 1080p with High settings?

A: Yes. The measured average FPS at 1920x1080 with High settings is 163.4 FPS, which is well above the 60 FPS threshold for smooth gameplay.

Q: What is the best resolution for this combo?

A: The data suggests 1440p is the sweet spot. At 2560x1440 with Medium settings, the average FPS is 111, which is playable. At 4K, even Low settings only achieve 66.2 FPS, making it less viable.

Q: Why is the performance at 4K so low compared to 1080p?

A: The RTX 2060’s 6 GB VRAM and 336.0 GB/s bandwidth are insufficient for the demands of 4K rendering. The FPS drops from 204 at 1080p Low to 66.2 at 4K Low, a 67% reduction, indicating the GPU is overwhelmed.

Q: How does the RTX 2060 compare to its nearest rivals?

A: The RTX 2060 has an average benchmark score of 16074, which is 0.5% higher than the AMD Radeon RX 7600S and 1.8% higher than the AMD Radeon Pro W5500. However, these differences are small and unlikely to be noticeable in practice.

Q: Is the CPU or GPU the limiting factor in this game?

A: The GPU is the limiting factor. The CPU’s strong performance, evidenced by a Cinebench R23 multicore score of 22799, does not prevent FPS drops at high resolutions, proving the graphics card is the bottleneck.

Q: What settings should be avoided with this combo?

A: Ultra settings should be avoided at 1440p and above. At 1440p Ultra, the average FPS is 70.6, but at 4K Ultra it drops to 38.6, which is below playable standards.

Settings Recommendations

Based on the measured FPS data, the best experience for this combo is achieved at 1080p with High settings, yielding 163.4 FPS. This provides a high refresh rate experience that is well-suited for the fast-paced action of Ready Or Not. If a player prefers higher visual fidelity, Medium settings at 1440p produce 111 FPS, which is still smooth and offers a better balance of image quality and performance.

For those with 4K displays, the data shows that only Low settings are viable, with an average of 66.2 FPS. However, this is not recommended as it sacrifices too much visual quality for a marginal performance gain. The Ultra preset is the least favorable option, as it drops below 60 FPS even at 1440p and becomes unplayable at 4K with 38.6 FPS. The practical recommendation is to play at 1080p High for maximum fluidity, or 1440p Medium if the monitor supports it, as these settings provide the best combination of responsiveness and visual clarity. The measured rows clearly indicate that this combo is best suited for 1080p gaming, where it can consistently deliver frame rates above 160 FPS.