Ready Or Not

The AMD Ryzen 7 5700X paired with the NVIDIA GeForce RTX 5090 delivers exceptional performance in Ready Or Not, placing this combo in the 25th spot out of 1748 tested configurations. The data reveals a system that is overwhelmingly GPU-bound at higher resolutions, yet shows surprising CPU limitations at 1080p, where frame rates approach the practical ceiling for this processor.

Settings Recommendations

The Ultra preset delivers playable performance across all resolutions, but it is not the optimal choice for competitive play. At 3840x2160 Ultra, the system produces 101.7 FPS, which drops the experience below the high-refresh territory that this hardware can otherwise achieve. The High preset at 4K yields 143.1 FPS, a 40.7% improvement over Ultra, making it the superior choice for users prioritizing smoothness over marginal visual gains.

At 2560x1440, the High preset produces 269.5 FPS, while Medium reaches 293.4 FPS. The difference between these two settings is only 8.9%, yet High offers noticeably better image quality. The data indicates that High is the sweet spot at 1440p, as it remains well above the 240Hz refresh rate that many competitive monitors offer. The Ultra setting at 1440p still achieves 187.7 FPS, which is respectable, but the performance cost relative to High is substantial.

For 1920x1080, the situation changes dramatically. The Low preset reaches 507.1 FPS, Medium achieves 471.5 FPS, and High hits 424.6 FPS. Even Ultra maintains 297.8 FPS. Given that the gap between Low and High is only 16.3%, users with high-refresh 1080p displays should select High for the best balance. However, for esports-style play where every frame matters, the Low preset's 507.1 FPS provides a measurable competitive edge, though the visual compromise is significant.

GPU Role

The RTX 5090 is the dominant component in this pairing, featuring 32 GB of GDDR7 memory on a 512-bit bus delivering 1.79 TB/s of bandwidth. The GPU's 21760 shading units and 176 ROPs provide the raw compute necessary for Ready Or Not's detailed environments. The boost clock of 2407 MHz, up from a 2017 MHz base, allows the card to sustain high throughput during intense firefights.

The GPU's 104.8 TFLOPS of FP32 performance is the primary driver of the frame rates observed. At 4K Ultra, the system produces 101.7 FPS, while dropping to Low settings at the same resolution yields 179.1 FPS — a 76.1% increase. This scaling demonstrates that the RTX 5090 has ample headroom and that visual settings, not resolution, are the primary constraint at 4K. The 32 GB VRAM capacity ensures that no texture or geometry data will spill into system memory, even with maximum detail levels.

The GPU's 94th percentile ranking among all tested GPUs, with an average benchmark score of 84306, confirms its position at the top of the performance hierarchy. Its nearest rival, the RTX 5090 D, scores 84241, a delta of only 0.1%, indicating that the standard 5090 is effectively the fastest consumer GPU available for this title.

How This Combo Ranks

This configuration ranks 25th out of 1748 tested combos in Ready Or Not, placing it in the top 1.4% of all systems benchmarked. This ranking reflects the synergy between the 5700X's Zen 3 architecture and the RTX 5090's Blackwell 2.0 design. The CPU's 8 cores and 16 threads provide adequate feeding for the GPU at most settings, though the 1080p results suggest some processor bottlenecking.

The combo's position in the rankings is notable given that the CPU itself only sits in the 83rd percentile among all processors, with an average benchmark score of 26214. The GPU's 94th percentile ranking compensates for the CPU's relatively modest standing. The data shows that this pairing extracts nearly all available performance from the RTX 5090, with the remaining 24 faster combos likely featuring more recent high-core-count CPUs.

Measured FPS Breakdown

At 3840x2160, the system delivers a clear performance hierarchy: Low produces 179.1 FPS, Medium achieves 154.7 FPS, High reaches 143.1 FPS, and Ultra drops to 101.7 FPS. The spread between Low and Ultra is 77.4 FPS, or 76.1% of the Ultra result. This indicates that at 4K, the GPU's workload scales significantly with visual fidelity.

Moving to 2560x1440, the frame rates increase substantially: Low hits 343 FPS, Medium reaches 293.4 FPS, High achieves 269.5 FPS, and Ultra produces 187.7 FPS. The relative scaling between settings tightens compared to 4K, with the Low-to-Ultra gap now at 155.3 FPS, or 82.7% of the Ultra result. This suggests the CPU begins to play a larger role at this resolution.

At 1920x1080, the results reveal CPU limitations: Low produces 507.1 FPS, Medium reaches 471.5 FPS, High achieves 424.6 FPS, and Ultra drops to 297.8 FPS. The performance ceiling at 1080p appears to be near 507 FPS, which is likely constrained by the 5700X's single-thread performance. The 5700X scores 3385 in PassMark single-thread tests and 3193 in Cinebench R23 single-core, figures that cap the maximum achievable frame rate regardless of GPU headroom.

FAQ

Q: What is the best settings preset for 4K gaming with this combo?

A: The High preset at 3840x2160 produces 143.1 FPS, which is 41.4 FPS higher than Ultra's 101.7 FPS. Given the substantial performance gain with minimal visual compromise, High is the recommended preset for 4K.

Q: Can this system hit 240 FPS at 1440p?

A: Yes, the High preset at 2560x1440 delivers 269.5 FPS, and Medium reaches 293.4 FPS. Both exceed 240 FPS, while even Ultra maintains 187.7 FPS.

Q: Is the RTX 5090 the limiting factor at 1080p?

A: No. At 1920x1080 Low, the system reaches 507.1 FPS, which appears to be near the CPU's maximum frame rate capability. The 5700X's single-thread score of 3385 in PassMark suggests it, not the GPU, limits 1080p performance.

Q: How does the RTX 5090 compare to its closest rival?

A: The RTX 5090 has an average benchmark score of 84306, while the RTX 5090 D scores 84241. This 0.1% delta places the standard 5090 marginally ahead of its closest competitor.

Q: What is the performance penalty for using Ultra settings?

A: Compared to High, Ultra reduces frame rates by 29.0% at 4K (143.1 to 101.7 FPS), 30.4% at 1440p (269.5 to 187.7 FPS), and 29.9% at 1080p (424.6 to 297.8 FPS).

Q: Does this combo rank among the top systems for Ready Or Not?

A: Yes, this configuration ranks 25th out of 1748 tested combos, placing it in the top 1.4% of all systems benchmarked for this game.

CPU Role

The AMD Ryzen 7 5700X contributes 8 cores and 16 threads based on the Zen 3 architecture, with a base clock of 3.40 GHz and a boost clock of 4.60 GHz. The processor's 32 MB of shared L3 cache and 4,150 million transistors on a 74 mm² die provide solid gaming performance, but its 2022 release date means it predates newer architectures.

The CPU's benchmark results show a clear pattern: the 3DMark 16-thread score of 6858 and max-thread score of 6850 indicate strong multi-threaded capability, while the single-thread score of 921 suggests moderate per-core performance. In Cinebench R23, the multicore score of 22620 contrasts with the single-core score of 3193, reinforcing that this processor is better suited for multi-threaded workloads than for pushing extreme single-thread frame rates.

In Ready Or Not, the CPU's role becomes evident at 1080p. The frame rate ceiling of approximately 507 FPS at Low settings suggests that the 5700X's single-thread performance limits the system at this resolution. At 1440p and 4K, the GPU becomes the primary constraint, with the CPU providing sufficient throughput to maintain high frame rates without becoming a bottleneck.

Resolution Scaling

The frame rate scaling from 1080p to 4K reveals the system's bottleneck characteristics. At High settings, the 1080p result of 424.6 FPS drops to 269.5 FPS at 1440p (a 36.5% decrease) and further to 143.1 FPS at 4K (a 66.3% decrease from 1080p). This progressive decline indicates that the GPU becomes increasingly dominant as resolution increases.

The scaling pattern is consistent across settings. At Low, the drop from 1080p's 507.1 FPS to 1440p's 343 FPS is 32.4%, while the 4K result of 179.1 FPS represents a 64.7% decrease from 1080p. At Ultra, the 1080p result of 297.8 FPS falls to 187.7 FPS at 1440p (37.0% decrease) and 101.7 FPS at 4K (65.9% decrease).

The data indicates that the RTX 5090's performance scales predictably with resolution, with the pixel count driving the workload. The 4K results are roughly 28-35% of the 1080p results, consistent with the 4x pixel increase between these resolutions. This suggests that the GPU's memory bandwidth of 1.79 TB/s and 512-bit bus are well-matched to the demands of 4K gaming, while the CPU's limitations at 1080p prevent the system from fully utilizing the GPU's potential at lower resolutions.