Ready Or Not
This combination provides smooth gameplay with an average of 108 FPS, suitable for most gaming scenarios.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 36 | 56 | 57 | 69 |
| 1440p QHD | 74 | 101 | 116 | 132 |
| 1080p Full HD | 113 | 161 | 180 | 204 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with AMD Ryzen 5 8400F + AMD Radeon RX 6600, In-Depth Analysis
The AMD Ryzen 5 8400F and AMD Radeon RX 6600 combination delivers a highly playable experience in Ready Or Not, though the data shows a clear shift in performance bottlenecks depending on resolution and settings. The measured frame rates across 1080p, 1440p, and 4K reveal a system that excels at lower resolutions but struggles to maintain high frame rates at 4K Ultra. This analysis breaks down the measured FPS data to explain where the CPU and GPU each take the lead, and what that means for configuring the game.
Resolution Scaling
The measured FPS data shows a predictable, yet steep, decline as resolution increases from 1920x1080 to 3840x2160. At High settings, the average frame rate drops from 160.9 FPS at 1080p to 100.9 FPS at 1440p, a reduction of 60 FPS, and then falls further to 56.2 FPS at 4K. This scaling pattern indicates that the AMD Radeon RX 6600 is the primary limiting component at higher resolutions; the GPU’s rendering workload increases significantly with pixel count, directly impacting performance.
The drop from 1440p to 4K is particularly sharp, with the High preset losing 44.7 FPS. This suggests that the RX 6600’s 8 GB of VRAM and 128-bit memory bus are sufficient for 1440p but become a bottleneck at 4K, where the larger frame buffer demands more memory bandwidth and capacity. The data implies that 1080p and 1440p are the sweet spots for this combo, while 4K is only viable for lower settings, as evidenced by the Low preset scoring 69.1 FPS at 4K versus 35.5 FPS at Ultra.
At 1080p, the scaling is less dramatic, with the gap between Low (204.4 FPS) and Ultra (112.8 FPS) being 91.6 FPS. The smaller pixel count reduces GPU load, allowing the CPU to play a more significant role in determining maximum frame rates. The transition from 1080p to 1440p shows a moderate performance hit, but the frame rates remain high, indicating that the system is well-balanced for these resolutions.
CPU Role
The AMD Ryzen 5 8400F, with its 6 cores and 12 threads, provides a solid foundation for Ready Or Not, a tactical shooter that typically relies on strong single-thread performance. The CPU’s base clock of 4.20 GHz and boost clock of 4.70 GHz are critical for maintaining high frame rates, especially at 1080p where the GPU is less likely to be the bottleneck. Benchmark results support this, with a 3DMark single-thread score of 951 and a PassMark single-thread score of 3684, indicating robust per-core performance.
The CPU’s multi-threaded capabilities are also relevant, as the game can utilize multiple cores for AI and physics calculations. The 3DMark max-threads score of 6165 and Cinebench R23 multicore score of 20851 suggest that the 8400F can handle background tasks without compromising frame pacing. The L3 cache of 16 MB shared across the cores helps reduce latency, which is beneficial for the fast decision-making required in a tactical shooter.
The data shows that the CPU is not the primary limitation in most scenarios, as the FPS at 1080p High (160.9 FPS) far exceeds what the GPU can deliver at 4K High (56.2 FPS). The 8400F’s 82nd percentile ranking among all CPUs, with an average benchmark score of 25064, places it close to the AMD Ryzen 7 2700X (0% delta) and slightly ahead of the AMD Ryzen 5 7500F (0.3% delta). This indicates that the processor is more than capable of feeding the RX 6600, and its role becomes more pronounced at lower resolutions where frame rates are higher.
GPU Role
The AMD Radeon RX 6600 is the workhorse of this pairing, and its specifications directly explain the performance at higher resolutions. The GPU’s 8 GB of GDDR6 memory on a 128-bit bus provides a memory bandwidth of 224.0 GB/s, which is a limiting factor at 4K. The boost clock of 2491 MHz and game clock of 2044 MHz allow for solid compute performance, as evidenced by the FP32 rating of 8.928 TFLOPS.
The GPU’s 69th percentile ranking among all GPUs, with an average benchmark score of 25235, places it in a competitive position. It is virtually tied with the AMD Radeon 890M (0% delta) and slightly behind the NVIDIA GeForce RTX 3060 Ti (0.5% delta). The RX 6600’s 1792 shading units and 64 ROPs are sufficient for 1080p and 1440p gaming, but the 4K Ultra result of 35.5 FPS shows that the GPU is overwhelmed when pixel count and graphical fidelity are maximized.
The data suggests that the GPU is the primary driver of performance differences across resolutions. At 4K, the gap between Low (69.1 FPS) and Ultra (35.5 FPS) is 33.6 FPS, highlighting the significant impact of settings on the GPU’s workload. The 4K High result of 56.2 FPS is barely playable, while the 4K Medium result of 57.1 FPS is nearly identical, indicating that the GPU’s memory bandwidth is the limiting factor rather than the shader compute.
Measured FPS Breakdown
The measured FPS data provides a comprehensive view of the system’s performance across all settings and resolutions. At 1920x1080, the system excels, with the Low preset achieving 204.4 FPS, Medium at 179.6 FPS, High at 160.9 FPS, and Ultra at 112.8 FPS. These numbers indicate that the CPU and GPU combination is well-suited for high-refresh-rate monitors at 1080p, with all presets delivering above 100 FPS.
Moving to 2560x1440, the performance remains strong but shows the GPU starting to strain. The Low preset delivers 132.2 FPS, Medium 115.7 FPS, High 100.9 FPS, and Ultra 73.9 FPS. The 1440p Ultra result is below 100 FPS, suggesting that users seeking maximum visual fidelity at this resolution may need to accept lower frame rates. The 1440p High result of 100.9 FPS is a good balance, offering a smooth experience with high-quality visuals.
At 3840x2160, the system struggles to maintain high frame rates. The Low preset achieves 69.1 FPS, while Medium and High are nearly identical at 57.1 FPS and 56.2 FPS, respectively. The Ultra preset drops to 35.5 FPS, which is not ideal for a tactical shooter requiring precise aiming. The 4K data clearly shows that the RX 6600 is the limiting factor, and users should avoid Ultra settings at this resolution.
The overall combo rank in game is 1423 out of 1748 tested combinations, indicating that this pairing is on the lower end of the performance spectrum for Ready Or Not. This rank is consistent with the measured data, which shows playable but not exceptional performance, particularly at 4K.
FAQ
Q: What is the best resolution for this CPU and GPU combo?
A: The data shows that 1920x1080 is the best resolution, with all presets achieving over 100 FPS, including Ultra at 112.8 FPS. 2560x1440 is also viable, with High delivering 100.9 FPS, but 3840x2160 should be avoided for high settings.
Q: How does the Ultra preset affect performance at 4K?
A: At 3840x2160, the Ultra preset delivers an average of 35.5 FPS, which is a significant drop from the Low preset’s 69.1 FPS. This represents a 33.6 FPS decrease, indicating that Ultra settings are too demanding for the RX 6600 at this resolution.
Q: Is the AMD Ryzen 5 8400F a bottleneck for the RX 6600?
A: The CPU is not a bottleneck in most cases. At 1080p High, the system achieves 160.9 FPS, which is high enough to suggest the GPU is the main limiter. The CPU’s 3DMark single-thread score of 951 and 82nd percentile ranking indicate it is more than capable of keeping up with the GPU.
Q: What is the performance difference between Low and High settings at 1440p?
A: At 2560x1440, the Low preset delivers 132.2 FPS, while the High preset delivers 100.9 FPS. This is a 31.3 FPS difference, which represents a significant visual quality upgrade for a moderate performance cost.
Q: How does this combo compare to similar hardware in benchmarks?
A: The CPU’s average benchmark score of 25064 is nearly identical to the AMD Ryzen 7 2700X (0% delta). The GPU’s average score of 25235 is slightly behind the NVIDIA GeForce RTX 3060 Ti (0.5% delta), but the measured FPS data shows the RX 6600 is still capable of high frame rates at lower resolutions.
*Q: Can this system handle 4K gaming in Ready Or Not?*
A: Yes, but only at lower settings. The 4K Low preset achieves 69.1 FPS, which is playable, but the High preset drops to 56.2 FPS and Ultra to 35.5 FPS. Users should stick to Low or Medium settings for a playable 4K experience.
Settings Recommendations
Based on the measured FPS data, the optimal settings depend on the user’s resolution and performance priorities. For 1920x1080, the Ultra preset at 112.8 FPS is the best choice, as it offers maximum visual fidelity while maintaining a frame rate well above 60 FPS. The High preset at 160.9 FPS is also excellent for users with high-refresh-rate monitors, as it provides a significant FPS boost with only a minor visual downgrade.
For 2560x1440, the High preset at 100.9 FPS is the recommended balance, delivering smooth gameplay with high-quality graphics. The Medium preset at 115.7 FPS is a viable alternative for users prioritizing frame rate, while the Ultra preset at 73.9 FPS is acceptable but may introduce slight stutter in intense firefights. The Low preset at 132.2 FPS is only recommended for competitive play where frame rate is paramount.
At 3840x2160, the Low preset at 69.1 FPS is the only setting that provides a consistently playable experience. The Medium preset at 57.1 FPS and High preset at 56.2 FPS are borderline, and the Ultra preset at 35.5 FPS is not recommended. Users gaming at 4K should accept lower visual fidelity to maintain a stable frame rate, as the GPU’s 8 GB VRAM and 224.0 GB/s bandwidth are insufficient for higher settings. The data strongly suggests that 1080p or 1440p are the preferred resolutions for this hardware combination, with 1080p Ultra offering the best overall experience.
Hardware Specifications
AMD Ryzen 5 8400F
AMD Radeon RX 6600
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 8400F + AMD Radeon RX 6600 in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 69.1 |
| 3840x2160 | Medium | 57.1 |
| 3840x2160 | High | 56.2 |
| 3840x2160 | Ultra | 35.5 |
| 2560x1440 | Low | 132.2 |
| 2560x1440 | Medium | 115.7 |
| 2560x1440 | High | 100.9 |
| 2560x1440 | Ultra | 73.9 |
| 1920x1080 | Low | 204.4 |
| 1920x1080 | Medium | 179.6 |
| 1920x1080 | High | 160.9 |
| 1920x1080 | Ultra | 112.8 |
Ready Or Not with Ryzen 5 8400F + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RX 6600 + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with Ryzen 5 8400F + RX 6600
Explore FPS benchmarks for other games using this same hardware combination.