Ready Or Not

The AMD Ryzen 5 5600X paired with the NVIDIA GeForce RTX 5070 delivers a compelling 1080p and 1440p experience in Ready Or Not, but the data reveals a pronounced shift in system dynamics as resolution climbs. While the combo ranks 365th out of 1748 tested configurations, the measured frame rates suggest the CPU is the primary driver at lower resolutions, with the GPU taking over as the bottleneck at 4K. This analysis breaks down the measured FPS rows to explore how the pairing behaves across the full spectrum of settings and resolutions.

Resolution Scaling — how FPS drops from 1080p to 4K and what it says about the limiting component

The measured data shows a dramatic decline in average frame rates as resolution increases, but the rate of that decline varies significantly by settings preset. At High settings, the combo produces 315.9 FPS at 1920x1080, which drops to 197.5 FPS at 2560x1440, and finally settles at 102.3 FPS at 3840x2160. This represents a 37.5% reduction from 1080p to 1440p, and a further 48.2% reduction from 1440p to 4K. The scaling from 1440p to 4K is particularly steep, indicating that the RTX 5070’s 12 GB VRAM and 672.0 GB/s bandwidth are being heavily taxed at the highest resolution.

The pattern is even more telling when examining the Low preset. Here, the jump from 399.2 FPS at 1080p to 249.3 FPS at 1440p is a 37.6% drop, but going from 1440p to 4K (133.3 FPS) is a 46.5% reduction. The fact that even at Low settings the 4K frame rate falls below what the CPU could theoretically push suggests the GPU is the limiting factor at 4K, regardless of preset. Conversely, at 1080p, the difference between Low (399.2 FPS) and High (315.9 FPS) is only 20.9%, which is modest, implying the CPU is keeping pace but the GPU is not fully saturated at lower resolutions.

The Ultra preset tells a different story. At 1080p, Ultra yields 221.1 FPS, which is 44.6% lower than Low. At 4K, Ultra drops to 70.6 FPS, a 68.1% reduction from 1080p Ultra. This wider spread at Ultra settings highlights how the combination of higher resolution and more demanding effects (likely ray tracing or heavy post-processing) disproportionately impacts the GPU. The data strongly suggests that at 1080p, the Ryzen 5 5600X’s single-thread performance (917 in 3dmark_single_thread) is sufficient to feed the RTX 5070, but at 4K, the GPU’s raw throughput (30.87 TFLOPS FP32) becomes the ceiling.

Settings Recommendations — which preset gives the best experience per the measured rows

Based strictly on the measured FPS rows, the Medium preset at 2560x1440 offers the most balanced experience, delivering 218 FPS. This is 88.2% higher than Ultra at the same resolution (139.8 FPS) while maintaining a frame rate that exceeds the refresh rate of most high-end monitors. For players prioritizing smoothness over visual fidelity, Medium at 1440p is the clear winner, as it stays above 200 FPS while still providing a substantial improvement over Low (249.3 FPS, but with reduced visual quality).

At 1080p, High settings (315.9 FPS) are the recommended choice for most users. The jump from High to Medium (347.9 FPS) is only 10.1%, while the drop from High to Ultra (221.1 FPS) is 30.0%. This makes High the sweet spot where visual quality is retained without sacrificing the high refresh rate that the CPU-GPU combo can deliver. At 4K, the situation is more constrained; High (102.3 FPS) is the only preset that stays above the 100 FPS threshold, making it the default recommendation. Ultra at 4K (70.6 FPS) is playable but may not be ideal for fast-paced tactical engagements, while Low (133.3 FPS) sacrifices too much visual clarity for a game that relies on environmental detail for situational awareness.

The data indicates that the Medium preset is the most efficient overall, as it maintains a high frame rate across all three resolutions (116.4 FPS at 4K, 218 FPS at 1440p, 347.9 FPS at 1080p). The consistency of Medium—where the 4K-to-1080p ratio is 2.99x—suggests it scales predictably with the GPU’s capabilities, making it the safest choice for users who may change resolutions frequently.

FAQ — 4-6 Q&A pairs answerable from FACT PACK data

Q: What is the highest average frame rate achieved by this combo in Ready Or Not?

A: The highest measured average FPS is 399.2, achieved at 1920x1080 with the Low settings preset.

Q: How does the combo’s ranking compare to other tested configurations?

A: The combo ranks 365th out of 1748 tested combinations, placing it in the top 20.9% of all configurations tested for this game.

Q: Is the RTX 5070’s 12 GB VRAM sufficient for 4K Ultra settings?

A: At 4K Ultra, the combo delivers 70.6 FPS, which is the lowest measured value, indicating that the 12 GB GDDR7 memory and 192-bit bus are under heavy strain at this preset, but the game remains playable.

Q: What is the CPU’s benchmark percentile relative to all other CPUs?

A: The AMD Ryzen 5 5600X ranks in the 78th percentile among all CPUs, with an average benchmark score of 20680.

Q: How does the RTX 5070’s performance compare to its nearest rival in synthetic benchmarks?

A: The RTX 5070’s average benchmark score is 41687, which is 0.6% higher than the NVIDIA GeForce RTX 3090’s score of 41441.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 2560x1440, Low delivers 249.3 FPS while Ultra delivers 139.8 FPS, a difference of 109.5 FPS or 78.3% higher performance at Low settings.

How This Combo Ranks — use comboRankInGame vs other tested combos

The combo’s rank of 365 out of 1748 tested combinations (top 20.9%) places it in a competitive position, but the raw data reveals that its standing is heavily influenced by resolution. At 1080p, the combo’s performance is exceptional—the 399.2 FPS Low result would likely put it in the top percentile, but the ranking is an aggregate across all tested scenarios. The nearest rival CPUs (AMD Ryzen 5 5600GT at 20740 avg score, Intel Core i7-10700 at 20746) have nearly identical synthetic scores (within 0.3% of the 5600X’s 20680), yet the 5600X’s 6-core/12-thread configuration with a 4.60 GHz boost clock appears well-matched to the RTX 5070 in this tactical shooter.

In the GPU space, the RTX 5070’s nearest rivals include the RTX 3090 (deltaPct of 0.6%), which is a previous-generation flagship. This suggests the 5070 offers comparable rasterization performance to the 3090, but with a smaller 12 GB memory pool and a 192-bit bus. The combo rank of 365 indicates that while this pairing is strong, there are 364 other configurations that achieve better aggregate performance in Ready Or Not. Given that the game’s release date is 2021-12-16, the data suggests that this modern CPU-GPU pairing is well-optimized for the game’s engine, but the 4K Ultra result (70.6 FPS) is the primary drag on the overall rank.

CPU Role — cores, clocks, and how they relate to this game's results

The AMD Ryzen 5 5600X is a 6-core, 12-thread processor based on the Zen 3 architecture (Vermeer), with a base clock of 3.70 GHz and a boost clock of 4.60 GHz. Its 32 MB L3 cache and dual-channel DDR4 memory support (51.2 GB/s bandwidth) are critical for feeding the GPU in a game like Ready Or Not, which relies on AI-driven NPC behavior and destructible environments. The CPU’s single-thread score of 917 in 3dmark_single_thread and 2622 in cinebench_r23_singlecore suggest strong per-core performance, which is essential for maintaining high frame rates at 1080p where the CPU is not the bottleneck.

The 3dmark_16_threads score of 5582 and 3dmark_max_threads score of 5588 indicate that the 12 threads are fully utilized under load, but the game’s performance scaling from 1080p to 1440p (a 37.5% drop at High settings) suggests that the CPU is not the limiting factor at lower resolutions. At 1080p, the difference between Low (399.2 FPS) and High (315.9 FPS) is only 83.3 FPS, which is relatively small, indicating that the CPU can handle the increased draw calls without significant frame rate loss. The 5600X’s 65W TDP and 7nm process node (TSMC) also mean it runs cool enough to sustain boost clocks during extended gaming sessions, which is reflected in the consistent frame rates across the measured rows.

The CPU’s percentile ranking of 78 and average benchmark score of 20680 place it slightly below its nearest rivals (5600GT at 20740, i7-10700 at 20746), but the deltaPct values are all within 0.7%, meaning the differences are negligible in real-world gaming. The data implies that the 5600X’s 6-core/12-thread configuration is sufficient for Ready Or Not, as the game does not appear to be heavily multi-threaded based on the FPS scaling patterns.

Measured FPS Breakdown — resolution by resolution, settings by settings, exact numbers

At 1920x1080, the combo delivers an average of 399.2 FPS on Low, 347.9 FPS on Medium, 315.9 FPS on High, and 221.1 FPS on Ultra. The spread from Low to Ultra is 178.1 FPS, with Ultra being 44.6% slower than Low. This wide range indicates that the GPU’s 30.87 TFLOPS FP32 compute is the primary driver, but the CPU’s boost clock of 4.60 GHz ensures no stutter at these high rates.

At 2560x1440, the measured averages are 249.3 FPS on Low, 218 FPS on Medium, 197.5 FPS on High, and 139.8 FPS on Ultra. The drop from Low to Medium is 12.6%, while the drop from High to Ultra is 29.2%. The 1440p results show a more predictable scaling pattern, with the GPU’s 672.0 GB/s bandwidth becoming more relevant as pixel count increases.

At 3840x2160, the averages fall to 133.3 FPS on Low, 116.4 FPS on Medium, 102.3 FPS on High, and 70.6 FPS on Ultra. The 4K results show a dramatic cliff between High and Ultra (31.0% drop), which aligns with the GPU’s 12 GB VRAM capacity being exceeded or near-exceeded at Ultra. The Low-to-High spread at 4K is only 30.0% (133.3 vs 102.3 FPS), suggesting that the GPU is the limiting factor across all settings at this resolution.

GPU Role — VRAM, clocks, and how they relate to this game's results

The NVIDIA GeForce RTX 5070 is built on the Blackwell 2.0 architecture (GB205 chip) using TSMC’s 5nm process, with 31,100 million transistors on a 263 mm² die. Its 12 GB GDDR7 memory on a 192-bit bus provides 672.0 GB/s of bandwidth, which is a critical resource for Ready Or Not at 4K. The base clock of 2325 MHz and boost clock of 2512 MHz deliver a pixel rate of 201.0 GPixel/s and a texture rate of 482.3 GTexel/s, which are directly reflected in the frame rates at lower resolutions.

The 4K Ultra result of 70.6 FPS is the most telling data point. It indicates that the 12 GB VRAM is likely saturated, as the drop from High (102.3 FPS) to Ultra (70.6 FPS) is 31.0%, which is much larger than the 12.1% drop from Medium (116.4 FPS) to High (102.3 FPS). This non-linear scaling suggests that Ultra settings either exceed the VRAM capacity or trigger memory bandwidth limitations. The GPU’s 48 RT cores and 192 tensor cores are also relevant, as Ready Or Not may use ray tracing for shadows and reflections, which would explain the significant performance hit at Ultra.

Compared to its nearest rival, the RTX 3090 (avgScore 41441), the RTX 5070 (avgScore 41687) is 0.6% faster in synthetic benchmarks, yet the 3090 has a 384-bit bus and 24 GB VRAM. The fact that the 5070 keeps pace despite having half the VRAM and a narrower bus demonstrates the efficiency of the Blackwell architecture. However, the 4K Ultra result in Ready Or Not suggests that the 12 GB VRAM is a practical limitation for the most demanding settings. The GPU’s percentile rank of 83 and average benchmark score of 41687 place it in the top 17% of all GPUs, but the measured FPS data shows that the 5070 is best utilized at 1440p or 1080p with High or Medium settings.