Ready Or Not
This combination delivers exceptional performance with an average of 266 FPS, perfect for high refresh rate gaming and competitive play.
Average FPS: resolution vs quality settings
| Ultra | High | Medium | Low | |
|---|---|---|---|---|
| 4K Ultra HD | 104 | 148 | 163 | 187 |
| 1440p QHD | 199 | 284 | 312 | 341 |
| 1080p Full HD | 316 | 366 | 379 | 397 |
Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.
Ready Or Not with AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5090 D, In-Depth Analysis
Ready Or Not is a tactical shooter that scales aggressively with hardware, and pairing the AMD Ryzen 5 4600G with the NVIDIA GeForce RTX 5090 D produces a fascinatingly lopsided result. The data shows this combination ranks 138th out of 2947 tested combos in this game, placing it in the top 5% of all configurations. The RTX 5090 D is clearly the dominant component, with benchmark scores that dwarf the CPU's contributions, but the measured frame rates reveal that this pairing is not just playable—it is exceptional, particularly at higher resolutions where the GPU's massive 32 GB memory pool and 512-bit bus come into play.
Resolution Scaling
The frame rate deltas across resolutions tell a clear story about where the bottleneck lives in this system. At 1080p with High settings, the combo produces 366 FPS. Moving to 1440p drops that to 284 FPS, a reduction of roughly 22%, and then to 4K at 148 FPS, another 48% cut from the 1440p figure. These are steep percentage drops, but the absolute numbers remain so high that the experience is never compromised. The pattern indicates that the game becomes progressively more GPU-bound as resolution climbs, which is expected given the RTX 5090 D's 104.8 TFLOPS of FP32 compute and 1.79 TB/s of memory bandwidth.
What is more revealing is the Low settings scaling. At 1080p Low, the system hits 397 FPS, which is only 8% higher than the 366 FPS at High. That small delta suggests the CPU is starting to assert itself at 1080p, even with a 6-core, 12-thread processor. At 4K Low, the system produces 187 FPS versus 148 FPS at High, a 26% improvement that shows the GPU still has headroom when pixel count rises. The real story emerges when comparing 4K Low (187 FPS) to 1080p Ultra (316 FPS)—the game scales nearly 1.7x from the highest resolution to the lowest quality preset, confirming that the RTX 5090 D is the primary driver of performance, while the Ryzen 5 4600G keeps pace well enough to avoid crippling the frame rate.
GPU Role
The NVIDIA GeForce RTX 5090 D is a Blackwell 2.0 architecture monster built on a 5 nm TSMC process with 92,200 million transistors. Its 32 GB of GDDR7 memory on a 512-bit bus delivers 1.79 TB/s of bandwidth, which is critical for a game like Ready Or Not where textures and geometry load in dense, cluttered environments. The boost clock of 2407 MHz, combined with 21760 shading units and 170 RT cores, allows the card to push pixel rates of 423.6 GPixel/s. These specifications translate directly into the measured results: the card never drops below 104 FPS in any tested configuration, even at 4K Ultra.
The GPU's benchmark percentile of 92 versus all GPUs underscores its elite status. Its average benchmark score of 77712 places it just 1.1% ahead of the AMD Radeon RX 6650M XT and 1.6% behind the AMD Radeon RX 6850M XT, though those deltas are within noise for a card that is clearly designed for high-end gaming. The 4K Medium result shows a minimum FPS of 139 and a maximum of 187, with an average of 163, demonstrating that even in the most demanding settings, the GPU maintains a tight frame time distribution. The RTX 5090 D's 680 tensor cores and support for DirectX 12 Ultimate mean it is future-proofed for any additional graphical features Ready Or Not might adopt, though the current data shows it already handles Ultra settings at 4K with a 104 FPS average.
CPU Role
The AMD Ryzen 5 4600G is a Zen 2 architecture processor with 6 cores and 12 threads, running at a base clock of 3.70 GHz and boosting to 4.20 GHz. Its 8 MB of shared L3 cache and 51.2 GB/s of dual-channel DDR4 memory bandwidth are modest by modern standards, and its benchmark scores reflect that: the Cinebench R23 multi-core score of 13593 and single-core score of 1919 place it in the 71st percentile of all CPUs. However, its nearest rivals tell a nuanced story. The AMD Ryzen 3 PRO 5355GE scores nearly identically (0.1% delta), while the Intel Core 7 150U is 0.6% faster and the Intel Core i3-14100T is 0.8% faster. None of these represent a significant gap, meaning the 4600G holds its own in synthetic tests.
In actual gameplay, the CPU's role becomes clearer. At 1080p High, the system achieves 366 FPS, but at 1080p Low it only rises to 397 FPS—a 31 FPS gain that is less than the 4K Low to 4K High delta of 39 FPS. This suggests the CPU is limiting the GPU at lower resolutions, preventing it from reaching even higher frame rates. The 3DMark single-thread score of 726 and multi-thread score of 4889 indicate that the processor's per-core performance is adequate but not exceptional, which aligns with the observed scaling. The CPU's 65 W TDP and 7 nm process node make it efficient, but its Renoir architecture, originally designed for APUs, shows its age when paired with a flagship GPU. Still, the data shows it is sufficient to feed the RTX 5090 D at playable frame rates in all tested scenarios.
FAQ
Q: Is this CPU-GPU combo balanced for Ready Or Not?
A: The data shows a GPU-heavy imbalance, but not a problematic one. At 4K Ultra, the combo delivers 104 FPS, and at 1080p Low it reaches 397 FPS. The CPU limits the GPU at lower resolutions, but the frame rates remain far above playable thresholds, so the imbalance only matters for chasing extreme refresh rates.
Q: What resolution is this pair best suited for?
A: Based on the measured FPS, 1440p High at 284 FPS is the sweet spot, offering a 48% increase over 4K High while still being GPU-bound enough to avoid CPU limitations. 4K is also viable at 148 FPS on High, but the CPU's influence becomes more apparent at 1080p where frame rate gains from lowering settings are smaller.
Q: How does the RTX 5090 D compare to its nearest GPU rivals?
A: The RTX 5090 D's average benchmark score of 77712 is 1.1% higher than the AMD Radeon RX 6650M XT and 1.6% lower than the AMD Radeon RX 6850M XT. It also trails the NVIDIA Tesla P100 PCIe 12 GB by 2.1% and the 16 GB version by 2.4%, though those deltas are negligible in real-world gaming.
Q: Does the Ryzen 5 4600G bottleneck the RTX 5090 D?
A: Yes, but only at lower resolutions. The 1080p Low to High delta is just 31 FPS (397 to 366), indicating the CPU is the limiting factor. At 4K, the GPU becomes the bottleneck, as shown by the 39 FPS gap between Low and High settings (187 to 148), where the CPU has more time to feed frames.
Q: What settings should I use for the most stable experience?
A: The Medium preset at 1440p provides the most consistent performance with a minimum FPS of 265 and maximum of 359. At 4K, Medium is also stable with a 139 FPS minimum and 163 average, making it the safest choice for high-resolution gaming without sacrificing visual quality.
Q: Is this combo overkill for a tactical shooter?
A: The data suggests it is, but in a good way. Ready Or Not at 4K Ultra still maintains 104 FPS, and at 1080p the system exceeds 300 FPS on all presets. For competitive play, the extra headroom ensures no frame drops, while for single-player the high settings are fully playable.
Measured FPS Breakdown
The complete dataset reveals a consistent hierarchy across resolutions and settings. At 1920x1080, the system produces its highest numbers: Low hits 397 FPS, Medium averages 379 FPS with a minimum of 322 and maximum of 435, High reaches 366 FPS, and Ultra drops to 316 FPS. The 1080p spread from Low to Ultra is 81 FPS, which is a 20% performance penalty for the highest quality preset. This is a relatively narrow range, reinforcing that the CPU is the limiting factor at this resolution—the GPU has more than enough power to render frames, but the processor cannot feed it faster.
Moving to 2560x1440, the frame rates remain extremely high but show more separation. Low delivers 341 FPS, Medium averages 312 FPS with a minimum of 265 and maximum of 359, High reaches 284 FPS, and Ultra drops to 199 FPS. The Low to Ultra gap expands to 142 FPS, a 42% reduction, indicating the GPU is becoming more involved. The 1440p Medium minimum of 265 FPS is still well above any display's refresh rate, making this resolution the most versatile for both high-refresh monitors and demanding graphical settings.
At 3840x2160, the GPU's dominance is fully apparent. Low produces 187 FPS, Medium averages 163 FPS with a minimum of 139 and maximum of 187, High reaches 148 FPS, and Ultra drops to 104 FPS. The Low to Ultra spread is 83 FPS, similar in absolute terms to 1080p but with much lower starting points. The 4K Ultra result of 104 FPS is the only configuration that approaches the 100 FPS threshold, yet it still clears it comfortably. The 4K Medium minimum of 139 FPS provides the best balance of visual fidelity and frame stability, as the data confirms with the highest minimum-to-average ratio of any 4K setting.
Settings Recommendations
For players prioritizing maximum frame rates on high-refresh monitors, the 1080p Medium preset is the optimal choice from the measured data. It delivers a 379 FPS average with a 322 FPS minimum, ensuring no dips below typical 240 Hz or 360 Hz refresh rates. The Low preset at 1080p offers only 18 FPS more (397), which does not justify the visual downgrade, while High and Ultra sacrifice 13 FPS and 63 FPS respectively without providing proportional image quality gains in a tactical shooter where visibility is paramount.
At 1440p, the Medium preset again stands out as the best all-around option, with a 312 FPS average and 265 FPS minimum. This configuration balances the GPU's capabilities with the CPU's limitations, providing a stable experience that exceeds even the most demanding 240 Hz displays. The High preset at 284 FPS is also viable, but the 28 FPS drop from Medium is not worth the marginal visual improvement. Ultra at 1440p drops to 199 FPS, which is still smooth but begins to approach the point where the CPU's influence could cause frame pacing issues.
For 4K gaming, the Medium preset is the clear recommendation based on the data. It produces a 163 FPS average with a 139 FPS minimum, which is the only 4K setting that maintains a minimum above 140 FPS. The High preset at 148 FPS is acceptable but has no recorded minimum, suggesting potential instability, while Low at 187 FPS sacrifices too much visual detail for a tactical shooter where enemy identification matters. Ultra at 104 FPS is playable but offers the least headroom, making it unsuitable for competitive play. The measured data shows that Medium at 4K provides the best combination of frame stability and visual quality, making it the default choice for this pairing at that resolution.
Hardware Specifications
AMD Ryzen 5 4600G
NVIDIA GeForce RTX 5090 D
FPS Benchmarks by Resolution & Settings
Performance data for AMD Ryzen 5 4600G + NVIDIA GeForce RTX 5090 D in Ready Or Not
| Resolution | Settings | Avg FPS |
|---|---|---|
| 3840x2160 | Low | 187.0 |
| 3840x2160 | Medium | 163.0 |
| 3840x2160 | High | 148.0 |
| 3840x2160 | Ultra | 104.0 |
| 2560x1440 | Low | 341.0 |
| 2560x1440 | Medium | 312.0 |
| 2560x1440 | High | 284.0 |
| 2560x1440 | Ultra | 199.0 |
| 1920x1080 | Low | 397.0 |
| 1920x1080 | Medium | 379.0 |
| 1920x1080 | High | 366.0 |
| 1920x1080 | Ultra | 316.0 |
Ready Or Not with Ryzen 5 4600G + Other GPUs
See how Ready Or Not performs with the same CPU but different graphics cards.
Ready Or Not with RTX 5090 D + Other CPUs
See how Ready Or Not performs with the same GPU but different processors.
Other Games with Ryzen 5 4600G + RTX 5090 D
Explore FPS benchmarks for other games using this same hardware combination.