Pc Building Simulator

# Pc Building Simulator — Intel Core Ultra 7 165H + NVIDIA GeForce RTX 4060

The Intel Core Ultra 7 165H paired with the NVIDIA GeForce RTX 4060 delivers a playable but resolution-sensitive experience in Pc Building Simulator, with the combo ranking 1800th out of 3002 tested configurations. The data shows a clear pattern: this system is a 1080p and 1440p performer that struggles to maintain smooth frame rates at 4K Ultra settings, where the average FPS drops to 37. The 16-core, 22-thread mobile CPU is more than adequate for the simulation's logical workloads, while the 8 GB RTX 4060 becomes the primary bottleneck at higher resolutions and quality presets.

Resolution Scaling

The FPS scaling from 1080p to 4K reveals a system where GPU load increases dramatically with resolution, while the CPU remains underutilized. At 1080p Low settings, the combo produces 237 FPS average, which drops by 36.3% to 150 FPS at 1440p Low, and then by another 48% to 78 FPS at 4K Low. This steep decline from 1440p to 4K suggests the RTX 4060's 8 GB VRAM and 128-bit memory bus (272.0 GB/s bandwidth) are nearing their limits even at Low settings.

The scaling behavior becomes more pronounced at higher quality presets. At High settings, 1080p delivers 119 FPS, 1440p drops to 75 FPS (a 37% reduction), and 4K falls to 39 FPS (a 67.2% reduction from 1080p). This non-linear scaling indicates that the GPU is the limiting component at 4K, as the pixel count quadruples from 1080p to 4K but the frame rate drops by roughly two-thirds rather than three-quarters — a sign that memory bandwidth constraints are partially mitigated by the simulation's moderate geometry complexity.

Medium settings show the most complete data, with min and max FPS values recorded. At 1080p Medium, the average is 168 FPS with a 143-193 FPS range. At 1440p Medium, the average drops to 106 FPS with a 90-122 FPS range. At 4K Medium, the average falls to 55 FPS with a 47-64 FPS range. The min-to-max spread widens proportionally at higher resolutions, suggesting that scene complexity variations in the simulation cause larger frame time spikes when the GPU is under heavier load.

Ultra settings produce the lowest frame rates but still maintain playability at 1080p and 1440p. At 1080p Ultra, the average is 113 FPS. At 1440p Ultra, it drops to 71 FPS. At 4K Ultra, the average falls to 37 FPS — below the 40 FPS threshold commonly considered the minimum for acceptable gameplay. The difference between 4K High (39 FPS) and 4K Ultra (37 FPS) is minimal, indicating that the GPU is already saturated at 4K High and further quality increases yield diminishing returns.

The overall pattern indicates a GPU-bound system at 4K and a balanced system at 1080p and 1440p. The 237 FPS at 1080p Low suggests the CPU can feed the GPU efficiently at lower resolutions, but the RTX 4060's 15.11 TFLOPS FP32 compute and 118.1 GPixel/s pixel rate cannot sustain high frame rates at 4K. For players targeting 4K, the data suggests sticking to Medium settings (55 FPS) or accepting sub-40 FPS at High and Ultra.

CPU Role

The Intel Core Ultra 7 165H is a 16-core, 22-thread mobile processor based on the Meteor Lake architecture, built on Intel's 7 nm process node. Its base clock of 3.80 GHz and boost clock of 5.00 GHz provide strong single-thread performance, which is crucial for simulation games that often rely on a primary game logic thread. The processor's Cinebench R23 single-core score of 1759 and multi-core score of 14551 indicate robust performance for both single-threaded and multi-threaded workloads.

In Pc Building Simulator, the CPU's role is primarily to handle game logic, component interactions, and the physics of the simulation. The 24 MB shared L3 cache and 89.6 GB/s memory bandwidth (dual-channel DDR5) provide adequate data throughput for the simulation's object management. The Passmark multi-thread score of 25933 and integer math score of 89415 suggest the CPU can handle complex calculations involving multiple simulated components without becoming a bottleneck.

The data supports this assessment: at 1080p Low settings, the system achieves 237 FPS, which is likely near the CPU's maximum frame delivery capability. The fact that 1440p Low still delivers 150 FPS — a 36.7% drop — indicates the GPU is beginning to take over as the limiting factor. However, the CPU's performance ceiling appears to be well above 237 FPS, as the GPU cannot maintain high frame rates at 4K even at Low settings (78 FPS).

Comparing to nearest rivals, the Core Ultra 7 165H has an average benchmark score of 34083, which is 0.3% higher than the Intel Core Ultra 5 338H (33989) and 0.4% higher than the AMD EPYC 4244P (34220) and AMD Ryzen AI 7 350 (34222). The Core Ultra 7 165H sits at the 84th percentile among all CPUs, indicating it outperforms the majority of processors in general benchmark workloads. This percentile ranking suggests the CPU is well above average for gaming, and the simulation's CPU demands are unlikely to expose any weaknesses.

The processor's 28 W TDP and mobile market segment indicate it is designed for laptops and compact systems, but its performance in this test shows no thermal throttling penalties at 1080p and 1440p. The active production status and December 2023 release date mean this is a current-generation part with modern instruction set support, which benefits the simulation's code paths that may leverage newer CPU features.

GPU Role

The NVIDIA GeForce RTX 4060 is the primary determinant of frame rates at higher resolutions and quality settings in Pc Building Simulator. Based on the Ada Lovelace architecture and built on TSMC's 5 nm process, this GPU features 3072 shading units, 96 TMUs, and 48 ROPs. The 8 GB GDDR6 memory on a 128-bit bus provides 272.0 GB/s bandwidth, which is adequate for 1080p and 1440p but becomes a constraint at 4K.

The GPU's benchmark results place it at the 61st percentile among all GPUs, with an average benchmark score of 17639. Its Passmark G3D score of 19545 and DirectX 12 score of 76 indicate solid DirectX 12 performance, which is relevant for a game released in 2019 that may use modern rendering paths. The 3DMark Steel Nomad DX12 score of 2302 provides additional evidence of the GPU's capabilities in current-generation workloads.

In Pc Building Simulator, the GPU's role is to render the 3D workspace, components, and case models. The simulation's visual fidelity is moderate, but the data shows that at 4K, the GPU is clearly the bottleneck. At 4K Ultra, the average FPS is 37, which is just 7 FPS higher than the 4K Medium minimum of 47 FPS. This narrow range indicates the GPU is running at its compute limits, with the 8 GB VRAM potentially causing texture swapping at higher quality settings.

Comparing to nearest rivals, the RTX 4060 has an average benchmark score of 17639, which is 0.2% lower than the AMD Radeon HD 7790 (17666), 0.3% higher than the AMD Radeon 780M (17588), 0.5% higher than the AMD Radeon Pro 560 (17551), and 0.7% higher than the AMD Radeon Pro 460 (17509). These rivals are all older or lower-tier GPUs, suggesting the RTX 4060 sits at a modest performance level in the broader GPU landscape, despite being a current-generation part.

The GPU's 1830 MHz base clock and 2460 MHz boost clock provide a significant overclocking headroom, but the 115 W TDP and dual-slot form factor suggest it is designed for mainstream laptops rather than high-performance desktops. The 1x 12-pin power connector and 300 W suggested PSU indicate modest power requirements, but the data shows the GPU's performance ceiling is reached at 4K Medium (55 FPS) — a playable but not ideal experience.

The RTX 4060's 24 RT cores and 96 tensor cores provide ray tracing and AI acceleration capabilities, but Pc Building Simulator's release date of 2019-01-28 means it likely does not utilize these features extensively. The GPU's DirectX 12 Ultimate (12_2) support ensures compatibility with any modern rendering features the game may use, but the primary performance driver remains the rasterization throughput of 15.11 TFLOPS FP32.

FAQ

Q: Can this combo run Pc Building Simulator at 4K with playable frame rates?

A: At 4K Medium settings, the average FPS is 55, which is playable. At 4K High, the average drops to 39 FPS, and at 4K Ultra, it falls to 37 FPS — both below the 40 FPS threshold for smooth gameplay. For 4K, Medium settings are the maximum recommended.

Q: What is the best resolution for this combo in Pc Building Simulator?

A: The data shows 1440p is the sweet spot. At 1440p High, the average is 75 FPS, and at 1440p Ultra, it is 71 FPS. This resolution provides a balance between visual fidelity and frame rate, with both settings remaining above 70 FPS.

Q: How does the CPU compare to its nearest rivals?

A: The Intel Core Ultra 7 165H has an average benchmark score of 34083, which is 0.3% higher than the Intel Core Ultra 5 338H (33989) and 0.4% higher than the AMD EPYC 4244P (34220) and AMD Ryzen AI 7 350 (34222). It ranks at the 84th percentile among all CPUs.

Q: Is the RTX 4060 a bottleneck at 1080p?

A: At 1080p, the RTX 4060 delivers 237 FPS at Low settings and 113 FPS at Ultra settings. The CPU can likely push higher frame rates, but the GPU's performance is sufficient for smooth gameplay at all quality presets at 1080p.

Q: What are the minimum and maximum FPS at Medium settings?

A: At 1080p Medium, the range is 143-193 FPS (average 168). At 1440p Medium, the range is 90-122 FPS (average 106). At 4K Medium, the range is 47-64 FPS (average 55). The spread widens at higher resolutions, indicating more frame time variability.

Q: How does this combo rank among all tested configurations?

A: The combo ranks 1800th out of 3002 tested combinations in Pc Building Simulator. This places it in the bottom 40% of all tested systems, reflecting the mid-range nature of both the CPU and GPU.

How This Combo Ranks

The Intel Core Ultra 7 165H + NVIDIA GeForce RTX 4060 combination ranks 1800th out of 3002 tested combos in Pc Building Simulator, placing it in the 40th percentile of all configurations. This ranking reflects a mid-tier system that can handle the simulation at mainstream resolutions but falls behind higher-end combinations at 4K.

The ranking is influenced by the GPU's 61st percentile standing among all GPUs, which is the weaker component in this pairing. The CPU's 84th percentile ranking is strong, but the GPU's average benchmark score of 17639 places it below many discrete desktop GPUs. The combo's performance at 1080p and 1440p is competitive, but at 4K, the RTX 4060's 8 GB VRAM and 128-bit memory bus limit performance to 37-78 FPS depending on settings.

Compared to the nearest rival GPUs, the RTX 4060's score of 17639 is nearly identical to the AMD Radeon HD 7790 (17666) and AMD Radeon 780M (17588). This near-parity suggests the RTX 4060's performance class is similar to older mid-range GPUs, which explains its mid-pack ranking in this game. The CPU's strong performance cannot compensate for the GPU's limitations at 4K, resulting in a system that is best suited for 1080p and 1440p gaming.

The ranking data indicates that 1800th place out of 3002 is a below-average result, but the system remains fully playable at 1080p and 1440p across all quality settings. For players who prioritize frame rates over resolution, this combo delivers 113 FPS at 1080p Ultra and 71 FPS at 1440p Ultra — both smooth experiences. The ranking is dragged down primarily by the 4K performance, where the system falls below 40 FPS at High and Ultra settings.

Measured FPS Breakdown

1920x1080 (1080p)

• Low: Average 237 FPS
• Medium: Average 168 FPS, min 143 FPS, max 193 FPS
• High: Average 119 FPS
• Ultra: Average 113 FPS

At 1080p, the system delivers excellent performance across all settings. The 237 FPS at Low indicates the CPU can drive high frame rates, while the medium setting's 143 FPS minimum ensures no noticeable stuttering. The difference between High (119 FPS) and Ultra (113 FPS) is a modest 6 FPS, suggesting that the quality preset has diminishing returns at this resolution.

2560x1440 (1440p)

• Low: Average 150 FPS
• Medium: Average 106 FPS, min 90 FPS, max 122 FPS
• High: Average 75 FPS
• Ultra: Average 71 FPS

At 1440p, the system remains smooth for all settings. The 150 FPS at Low shows the GPU can still push high frame rates, while Ultra at 71 FPS is above the 60 FPS threshold for most displays. The Medium setting's 90 FPS minimum indicates the system can maintain consistent frame times during complex scenes.

3840x2160 (4K)

• Low: Average 78 FPS
• Medium: Average 55 FPS, min 47 FPS, max 64 FPS
• High: Average 39 FPS
• Ultra: Average 37 FPS

At 4K, the system's performance degrades significantly. Low settings maintain 78 FPS, which is playable, but Medium drops to 55 FPS with a 47 FPS minimum. High and Ultra settings fall below 40 FPS, making them unsuitable for smooth gameplay. The 47 FPS minimum at Medium suggests occasional frame drops that could be noticeable in fast-moving scenes.

The data shows a clear progression: the system can handle 4K at Low and Medium settings, but players should stick to 1440p Ultra or 1080p Ultra for the best visual quality with smooth frame rates. The GPU's 8 GB VRAM and 272.0 GB/s bandwidth are the limiting factors at 4K, as the CPU's performance is sufficient even at 1080p Low with 237 FPS.