Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
81
good

This combination provides smooth gameplay with an average of 81 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 29 30 43 61
1440p QHD 55 58 82 116
1080p Full HD 88 92 131 184

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 61
3840x2160 Medium 43
3840x2160 High 30
3840x2160 Ultra 29
2560x1440 Low 116
2560x1440 Medium 82
2560x1440 High 58
2560x1440 Ultra 55
1920x1080 Low 184
1920x1080 Medium 131
1920x1080 High 92
1920x1080 Ultra 88

Pc Building Simulator with Intel Core Ultra 5 245 + NVIDIA GeForce GTX 1070, In-Depth Analysis

Pc Building Simulator is a simulation title that stresses system configuration logic more than raw graphical fidelity, but the measured data for the Intel Core Ultra 5 245 paired with the NVIDIA GeForce GTX 1070 reveals a clear performance curve across resolutions and presets. The combination produces playable frame rates at 1080p and 1440p, while 4K pushes the aging GPU to its limits, with the CPU showing consistent headroom throughout.

Resolution Scaling

The FPS drop from 1080p to 4K is steep and tells a straightforward story about which component is the bottleneck. At High settings, the average frame rate falls from 92 FPS at 1920x1080 to 58 FPS at 2560x1440, a reduction of 34 FPS, and then plummets to 30 FPS at 3840x2160. That represents a 67% loss from 1080p to 4K, which is a classic sign that the GTX 1070’s 8 GB of GDDR5 memory and 256-bit bus are being saturated as pixel count rises.

The scaling pattern is consistent across all presets. Low settings show 184 FPS at 1080p, dropping to 116 FPS at 1440p, and then 61 FPS at 4K. Medium settings follow the same trajectory: 131 FPS at 1080p, 82 FPS at 1440p, and 43 FPS at 4K. Ultra settings are the most demanding, with 88 FPS at 1080p falling to 55 FPS at 1440p and finally 29 FPS at 4K. The gap between Low and Ultra narrows as resolution increases, which indicates that the GPU becomes the limiting factor more decisively at higher resolutions.

At 1080p, the delta between Low (184 FPS) and Ultra (88 FPS) is 96 FPS, showing that the CPU can feed the GPU enough data to make settings matter significantly. At 4K, the delta between Low (61 FPS) and Ultra (29 FPS) is only 32 FPS, meaning the GPU is so constrained that even dropping to Low cannot produce a smooth experience. The data suggests that 1440p is the sweet spot where the GTX 1070 still has enough bandwidth to respond to settings changes, while 4K is firmly GPU-bound.

The Medium preset at 4K provides the only min/max data in the high-resolution tier, with a minimum of 37 FPS and a maximum of 50 FPS. This range is tighter than the 1080p Medium spread (111 to 150 FPS), further confirming that the GPU’s memory bandwidth is the hard ceiling at 4K. Benchmark results indicate that the Core Ultra 5 245 is not the limiting factor; its 14 cores and 5.10 GHz boost clock provide ample processing power even at lower resolutions where the frame rates exceed 180 FPS.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Pc Building Simulator?

A: The data shows 2560x1440 as the optimal balance, with 58 FPS at High and 82 FPS at Medium. At 1080p, the combo delivers 92 FPS at High, but the extra headroom at 1440p provides better image quality without sacrificing playability. 4K is only viable at Low settings, where it hits 61 FPS.

Q: How does the GTX 1070 perform at 4K in this game?

A: At 3840x2160, the GTX 1070 averages 30 FPS on High and 29 FPS on Ultra, both below the 60 FPS threshold. Medium settings reach 43 FPS with a minimum of 37 FPS, while Low settings achieve 61 FPS. The GPU’s 256.3 GB/s bandwidth is insufficient for smooth 4K performance on higher presets.

Q: Is the Intel Core Ultra 5 245 a bottleneck in this game?

A: No. The CPU’s benchmarks show strong single-thread performance (4,648 in Cinebench R23 single-core) and multi-thread capability (32,924 in Cinebench R23 multi-core). The FPS drops from 1080p to 4K mirror the GPU’s known limitations, indicating the GTX 1070 is the limiting component across all tested settings.

Q: What is the difference between Low and Ultra settings at 1080p?

A: Low settings average 184 FPS, while Ultra averages 88 FPS, a difference of 96 FPS. Medium sits at 131 FPS and High at 92 FPS. The large spread shows that the CPU can handle the highest preset, but the GPU’s pixel rate of 107.7 GPixel/s caps Ultra performance well below the Low setting’s frame rate.

Q: How does this combo rank against other tested configurations?

A: The combination ranks 2,484 out of 3,002 tested combos in Pc Building Simulator, placing it in the lower portion of the database. This reflects the GTX 1070’s age, as its GPU percentile is 47, meaning it outperforms less than half of all GPUs tested. The CPU ranks in the 90th percentile, creating a significant performance mismatch.

Q: What settings provide the most consistent frame pacing?

A: The only presets with min/max data are Medium at various resolutions. At 1080p, Medium ranges from 111 to 150 FPS; at 1440p, it ranges from 70 to 95 FPS; and at 4K, it ranges from 37 to 50 FPS. This data suggests Medium offers the most predictable performance, with the 4K range being the tightest relative to its average.

CPU Role

The Intel Core Ultra 5 245 is a 14-core, 14-thread processor based on the Arrow Lake architecture, built on TSMC’s 3 nm process. Its base clock of 3.50 GHz boosts to 5.10 GHz, and it carries 24 MB of shared L3 cache. In Pc Building Simulator, the CPU’s role is to handle the simulation logic, component interactions, and system calculations, which are not as graphically intense as the rendering pipeline.

Benchmark data shows the CPU performs well above average, with a 90th percentile ranking among all CPUs. Its Cinebench R23 multi-core score of 32,924 and single-core score of 4,648 indicate strong all-around capability. The nearest rival, the AMD Ryzen 9 7900, scores 49,228 in average benchmark, a delta of -0.5%, meaning the Core Ultra 5 245 is essentially on par with that high-end desktop processor. The Intel Core i5-14600K is 0.8% behind, while the AMD Ryzen 7 PRO 5755G trails by 0.4%.

In this game, the CPU’s impact is visible in the scaling from Low to Ultra at 1080p. The fact that Low settings reach 184 FPS while Ultra only manages 88 FPS shows the CPU can feed the GPU far more frames than the GPU can render at higher presets. If the CPU were the bottleneck, the FPS would plateau regardless of resolution, but the data shows a consistent drop as resolution increases, which is a GPU signature.

The CPU’s 65 W TDP and 3 nm process make it an efficient partner for a GPU that draws 150 W. The PassMark multi-thread score of 38,706 and single-thread score of 4,394 reinforce that the processor is not a weak link. For a game like Pc Building Simulator, where the workload involves simulating hardware configurations, the CPU’s 14 cores provide ample parallel processing, though the game likely relies more on single-thread performance given its 2019 release date.

Settings Recommendations

The measured data provides a clear hierarchy for the best experience. At 1080p, High settings with 92 FPS offer a smooth experience, but Medium at 131 FPS provides a 39 FPS advantage with minimal visual compromise. The min/max data for Medium (111 to 150 FPS) shows consistent frame delivery. Ultra at 88 FPS is only 4 FPS behind High, making it a viable choice for users who prioritize visual fidelity over the small performance gap.

At 1440p, Medium is the recommended preset, delivering 82 FPS with a min of 70 and max of 95. High settings at 58 FPS are playable but hover near the edge of smoothness, while Ultra at 55 FPS is marginally worse. Low settings at 116 FPS are excessive for this resolution, indicating that users can afford to increase quality. The data shows that Medium at 1440p maximizes the balance between image quality and frame rate, with no preset dropping below 55 FPS.

At 4K, the options are limited. Low settings at 61 FPS are the only preset that clears the 60 FPS threshold, but this requires sacrificing most visual detail. Medium at 43 FPS is the next best, with a min of 37 FPS that may cause noticeable stutter in simulation-heavy scenes. High and Ultra at 30 and 29 FPS respectively are below the playable threshold for most users. For 4K, the data suggests accepting Low settings or reducing the resolution to 1440p.

The overall recommendation is to run the game at 1440p Medium for the best combination of performance and visual quality. For users with 1080p displays, High settings at 92 FPS are ideal, with Ultra as a close alternative. The GTX 1070’s 8 GB memory is adequate for this game at these settings, but the 4K data clearly shows the GPU’s limits.

How This Combo Ranks

The combination of the Intel Core Ultra 5 245 and NVIDIA GeForce GTX 1070 ranks 2,484 out of 3,002 tested combos in Pc Building Simulator, placing it in the 17th percentile of all configurations. This low ranking is primarily due to the GPU, which sits at the 47th percentile among all GPUs, while the CPU ranks in the 90th percentile. The mismatch between a top-tier CPU and a mid-range GPU from 2016 creates an unbalanced system.

The GPU’s average benchmark score of 9,780 places it near the AMD FirePro W5000 (9,803, -0.2%), NVIDIA Quadro M2000M (9,832, -0.5%), and NVIDIA Tesla M10 (9,724, +0.6%). These rivals are all professional or older workstation cards, underscoring the GTX 1070’s dated status. The CPU, by contrast, outperforms the Intel Xeon Gold 5318H by 0.6% and trails the AMD Ryzen 9 7900 by only 0.5%.

In the context of Pc Building Simulator, this ranking means the combo will handle the game’s simulation aspects easily, but the rendering performance will be constrained. The game’s release date of 2019-01-28 means it was designed for hardware from that era, and the GTX 1070 was already two years old at that point. The CPU’s release in 2025 makes it a future-proof component, but it cannot compensate for the GPU’s limitations.

The data indicates that users with this combo should focus on the GPU as the upgrade path. Replacing the GTX 1070 with a more modern card would dramatically improve the 4K results, which are currently only playable at Low settings. The CPU has enough headroom to support a significantly faster GPU without becoming a bottleneck.

Measured FPS Breakdown

At 1920x1080, the measured average FPS across settings is as follows: Low 184, Medium 131, High 92, Ultra 88. The Medium preset has the only min/max data, ranging from 111 to 150 FPS. The delta from Low to Ultra is 96 FPS, showing that the GPU is the primary constraint at this resolution, with the CPU able to push well over 180 FPS when settings are low.

At 2560x1440, the averages are: Low 116, Medium 82, High 58, Ultra 55. Medium ranges from 70 to 95 FPS. The drop from 1080p to 1440p is significant, with Low falling by 68 FPS and Ultra by 33 FPS. This indicates that the GPU’s fill rate and memory bandwidth are being taxed more heavily, with the FP32 performance of 6.463 TFLOPS becoming a limiting factor.

At 3840x2160, the averages are: Low 61, Medium 43, High 30, Ultra 29. Medium ranges from 37 to 50 FPS. The 4K results show a dramatic reduction, with Low barely hitting 61 FPS and all other presets falling below 45 FPS. The GPU’s 8 GB memory and 256.3 GB/s bandwidth are saturated, and the 64 ROPs are insufficient for high-resolution rendering.

The data shows a clear pattern: the GTX 1070 can handle 1080p at any preset with excellent frame rates, 1440p at Medium or High with good performance, and 4K only at Low settings. The CPU’s performance remains consistent across all tests, with no evidence of it limiting the frame rates. The combo is well-suited for 1080p and acceptable for 1440p, but 4K gaming requires significant settings compromises.

Hardware Specifications

Intel Core Ultra 5 245

Cores / Threads 14 / 14
Base Clock 3500 MHz
Boost Clock 5100 MHz
TDP 65W
Socket Intel Socket 1851
View Full CPU Details →

NVIDIA GeForce GTX 1070

VRAM 8 GB GDDR5
Base Clock —
Boost Clock 1683 MHz MHz
TDP 150 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core Ultra 5 245 + NVIDIA GeForce GTX 1070 in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 61.0
3840x2160 Medium 43.0
3840x2160 High 30.0
3840x2160 Ultra 29.0
2560x1440 Low 116.0
2560x1440 Medium 82.0
2560x1440 High 58.0
2560x1440 Ultra 55.0
1920x1080 Low 184.0
1920x1080 Medium 131.0
1920x1080 High 92.0
1920x1080 Ultra 88.0

Pc Building Simulator with GTX 1070 + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with iUltra 5 245 + GTX 1070

Explore FPS benchmarks for other games using this same hardware combination.