Pc Building Simulator

Pc Building Simulator is a simulation title where the bottleneck is rarely where you expect it. The measured data for the Intel Core i7-14700K paired with the NVIDIA GeForce RTX 4070 reveals a configuration that scales predictably with resolution but shows a significant dependency on graphical settings. The combination ranks 806th out of 3723 tested combos in this game, placing it in the top quarter of all configurations. The data indicates that this system is exceptionally strong at 1080p, capable of high refresh rates, but the frame pacing at 4K Ultra suggests the GPU is being pushed to its architectural limits.

Resolution Scaling

The measured FPS data shows a clear and consistent downward trend as resolution increases, which is typical for a GPU-bound scenario at higher settings. At High settings, the average frame rate drops from 184 FPS at 1920x1080 to 116 FPS at 2560x1440, a reduction of 68 FPS. Moving to 3840x2160, the average falls further to 61 FPS, which is a 123 FPS drop from the 1080p baseline. This substantial scaling indicates that the RTX 4070's rendering pipeline is the primary constraint at 4K, as the demand on the GPU's pixel throughput increases dramatically.

The scaling pattern is even more pronounced at Low settings. Here, the system achieves 367 FPS at 1080p, 232 FPS at 1440p, and 121 FPS at 4K. The relative drop from 1080p to 4K is 246 FPS, which is a 67% reduction. This larger absolute drop at lower settings suggests that when the GPU is less burdened by shading work, the CPU and memory subsystem are better able to feed frames, but the GPU's raw fill rate still becomes the limiting factor at higher resolutions. The fact that 4K Low (121 FPS) is still more than double 4K High (61 FPS) shows that the game's visual settings have a massive impact on the workload.

The data reveals that at Medium settings, the system provides a middle ground, with 260 FPS at 1080p, 164 FPS at 1440p, and 86 FPS at 4K. The min FPS figures for Medium settings also tell a story: at 1080p, the minimum is 221 FPS, which is only 39 FPS below the average. At 1440p, the minimum is 140 FPS (24 FPS below average), and at 4K, the minimum is 73 FPS (13 FPS below average). This indicates that frame time consistency improves as resolution increases, likely because the GPU becomes more uniformly saturated, reducing the variance caused by CPU-side frame generation hitches.

Looking at the Ultra preset, the system produces 175 FPS at 1080p, 110 FPS at 1440p, and 58 FPS at 4K. The drop from 1080p to 4K is 117 FPS. Notably, the 4K Ultra result (58 FPS) is the only measured scenario that falls below the 60 FPS threshold, suggesting that for a consistently smooth experience at native 4K, the Ultra preset is too demanding for this GPU. The scaling from 1440p to 4K at Ultra is a 52 FPS drop, which is a 47% reduction, highlighting the exponential cost of pixel count at the highest visual quality.

CPU Role

The Intel Core i7-14700K is a 20-core, 28-thread processor based on the Raptor Lake architecture, running on the Intel Socket 1700 platform. Its boost clock of 5.60 GHz and base clock of 3.40 GHz are key specifications for this simulation genre, which often involves complex logic and physics calculations alongside rendering. The processor's performance percentile is 94, meaning it outperforms 94% of all CPUs in the benchmark database. Its average benchmark score of 69355 places it in close competition with the AMD Ryzen 9 7950X, which scores 69515, a delta of -0.2%, meaning the i7 is virtually tied with that rival.

In the context of Pc Building Simulator, the CPU's role is to manage the game's simulation logic, AI, and the assembly of components in the virtual workspace. The data suggests that at 1080p with Low settings, the CPU is likely the limiting factor, as the GPU is not heavily taxed. The 367 FPS result at 1080p Low is likely near the ceiling of what the game engine can produce with this CPU, as the single-threaded performance (PassMark single thread score of 4472) and high boost clock are crucial for maintaining high frame rates when the GPU has spare capacity. The Cinebench R23 multi-core score of 33440.5 demonstrates the processor's ability to handle multi-threaded workloads, which is beneficial for background tasks and any game logic that leverages multiple cores.

The nearest rivals for the CPU are all within a 1% margin of the average benchmark score. The AMD EPYC 9115 scores 69288 (0.1% delta), the AMD Ryzen 9 7950X scores 69515 (-0.2%), the AMD Ryzen 9 7940HX scores 69875 (-0.7%), and the AMD Ryzen 7 9700F scores 69996 (-0.9%). This indicates that the i7-14700K is positioned in a highly competitive performance tier, and in this game, its 20 cores are more than sufficient to avoid becoming a bottleneck at most settings. The only scenario where the CPU might show its limits is at 1080p Low, where the frame rate exceeds 300 FPS, pushing the limits of the game's draw call processing.

GPU Role

The NVIDIA GeForce RTX 4070 is built on the Ada Lovelace architecture and features 12 GB of GDDR6X memory on a 192-bit bus, yielding a bandwidth of 504.2 GB/s. The GPU has a base clock of 1920 MHz and a boost clock of 2475 MHz, with 5888 shading units. Its performance percentile is 81, placing it above 81% of all GPUs. The average benchmark score of 37648 puts it in a tight race with the NVIDIA Tesla P4 (37628, 0.1% delta) and the AMD Radeon RX Vega 56 (37507, 0.4% delta), while the NVIDIA GeForce RTX 4080 Mobile (38135) is 1.3% faster and the AMD Radeon PRO W6400 (37157) is 1.3% slower.

The GPU's role in Pc Building Simulator is to render the 3D workspace, components, and the PC cases being assembled. The 12 GB VRAM is a significant factor, as the game likely loads high-resolution textures for the various components. The measured FPS data shows the GPU's scaling behavior. At 4K Ultra, the GPU produces 58 FPS, which suggests it is fully saturated. The 3DMark Steel Nomad DX12 score of 3854 indicates the card's DirectX 12 performance, which is relevant for this game's rendering engine. The PassMark G3D score of 26927 confirms its strong general 3D performance.

The RTX 4070's 46 RT cores and 184 Tensor cores are present, but Pc Building Simulator is not a ray-tracing heavy title, so these features likely have minimal impact on the measured results. The GPU's memory bandwidth of 504.2 GB/s is a critical factor at 4K, where the demand for texture data increases. The data shows that the GPU is the clear bottleneck at 4K High and Ultra, as the frame rates drop to 61 FPS and 58 FPS respectively. The transition from 1440p High (116 FPS) to 4K High (61 FPS) is a 47% performance loss, which is a typical penalty for quadrupling the pixel count. This indicates that the GPU's fill rate and memory bandwidth are the limiting factors at this resolution.

FAQ

Q: What is the best resolution for this CPU/GPU combo in Pc Building Simulator?

A: Based on the measured FPS, 2560x1440 is the sweet spot. At High settings, it produces 116 FPS, which is well above the 60 FPS threshold, and even at Ultra, it maintains 110 FPS. This resolution offers a balance between visual fidelity and frame rate, avoiding the 4K Ultra dip to 58 FPS.

Q: Can this system run the game at 4K?

A: Yes, but with caveats. At 4K Low settings, it averages 121 FPS, and at Medium, it averages 86 FPS. At High settings, it drops to 61 FPS, and at Ultra, it falls to 58 FPS. For a smooth 4K experience, Medium or High settings are recommended, as Ultra dips below the 60 FPS mark.

Q: Is the CPU or GPU the limiting factor at 1080p?

A: The data suggests the CPU becomes more relevant at 1080p, especially at Low settings. The 367 FPS result at 1080p Low is exceptionally high, and the CPU's single-thread performance (PassMark single thread score of 4472) is likely the ceiling. At higher settings, the GPU takes over as the primary constraint, as seen by the drop to 175 FPS at Ultra.

Q: How does the RTX 4070 compare to its nearest rivals in raw performance?

A: The GPU's average benchmark score of 37648 is nearly identical to the NVIDIA Tesla P4 (37628) and AMD Radeon RX Vega 56 (37507). It trails the RTX 4080 Mobile by 1.3% and leads the Radeon PRO W6400 by 1.3%. These are marginal differences, so the gaming experience will be similar across these cards.

Q: Is the 12 GB VRAM sufficient for this game?

A: The measured data indicates no VRAM-related frame drops. The min FPS figures for Medium settings are consistent (221 FPS at 1080p, 140 FPS at 1440p, 73 FPS at 4K), suggesting that the 12 GB buffer is adequate for the game's textures at all tested resolutions and settings.

Q: What is the performance ranking of this specific combo?

A: The Intel Core i7-14700K and NVIDIA GeForce RTX 4070 combination ranks 806 out of 3723 total tested combos in Pc Building Simulator. This places it in the top 22% of all configurations, indicating a high-performing system for this title.

Settings Recommendations

The measured FPS rows provide a clear picture of which preset delivers the best experience. For a 60 FPS target, the High preset is the safest choice across all resolutions. It yields 184 FPS at 1080p, 116 FPS at 1440p, and 61 FPS at 4K. The 4K figure is just above the 60 FPS line, so for a locked 60 FPS experience, dropping to Medium at 4K provides a more comfortable margin with 86 FPS average and a 73 FPS minimum.

For users with high refresh rate monitors at 1440p (165 Hz or higher), the Ultra preset is viable, delivering 110 FPS. At 1080p, the Ultra preset (175 FPS) is still far above the threshold for most 144 Hz panels. The Low preset is unnecessary for this hardware, as it produces 367 FPS at 1080p and 232 FPS at 1440p, which is likely beyond the refresh rate of most displays and only serves to reduce visual quality. The data suggests that High is the optimal balance of visual fidelity and performance for this system, with Medium serving as a fallback for 4K users who want to ensure no frame drops below 60 FPS.

Measured FPS Breakdown

At 1920x1080, the system demonstrates its maximum potential. The Low preset achieves an average of 367 FPS, making it the highest result in the entire dataset. The Medium preset averages 260 FPS, with a minimum of 221 FPS and a maximum of 299 FPS. The High preset averages 184 FPS, and the Ultra preset averages 175 FPS. The spread between Low and Ultra is 192 FPS, showing that the GPU has significant headroom at this resolution, and the CPU's 5.60 GHz boost clock is leveraged to push frame rates to their absolute peak.

At 2560x1440, the performance remains strong. The Low preset averages 232 FPS, while Medium averages 164 FPS, with a minimum of 140 FPS and a maximum of 189 FPS. The High preset averages 116 FPS, and the Ultra preset averages 110 FPS. The difference between High and Ultra is only 6 FPS, suggesting that the Ultra preset's additional effects are not heavily taxing the GPU at this resolution. The min FPS for Medium (140 FPS) indicates that the system maintains smooth frame pacing even under load.

At 3840x2160, the GPU's limits are exposed. The Low preset averages 121 FPS, which is still a playable frame rate. The Medium preset averages 86 FPS, with a minimum of 73 FPS and a maximum of 99 FPS, providing a playable experience with headroom. The High preset averages 61 FPS, which is exactly at the 60 FPS target, but the lack of a min FPS measurement for this row suggests that there may be occasional dips below that threshold. The Ultra preset averages 58 FPS, which falls short of the 60 FPS target, making it the only setting where the system cannot maintain a smooth experience at 4K. The data clearly shows that the RTX 4070's 504.2 GB/s bandwidth and 158.4 GPixel/s pixel rate are the limiting factors at this resolution, not the CPU.