Pc Building Simulator

Pc Building Simulator

AVERAGE FPS
70
good

This combination provides smooth gameplay with an average of 70 FPS, suitable for most gaming scenarios.

Average FPS: resolution vs quality settings

UltraHighMediumLow
4K Ultra HD 27 29 34 52
1440p QHD 51 49 71 102
1080p Full HD 78 81 113 157

Cell color: green is 120+ FPS, teal is 60+, amber is 30+, red is below 30.

Every measured configuration

3840x2160 Low 52
3840x2160 Medium 34
3840x2160 High 29
3840x2160 Ultra 27
2560x1440 Low 102
2560x1440 Medium 71
2560x1440 Ultra 51
2560x1440 High 49
1920x1080 Low 157
1920x1080 Medium 113
1920x1080 High 81
1920x1080 Ultra 78

Pc Building Simulator with Intel Core i7-13700K + NVIDIA GeForce RTX 3050 4 GB, In-Depth Analysis

# Pc Building Simulator — Intel Core i7-13700K + NVIDIA GeForce RTX 3050 4 GB

The pairing of Intel's 16-core Core i7-13700K with NVIDIA's 4 GB GeForce RTX 3050 produces an unusual bottleneck profile in Pc Building Simulator: the CPU is far more capable than the GPU, and the measured frame rates reflect that imbalance across every resolution. The RTX 3050, with its 90 W TDP and 192.0 GB/s memory bandwidth, becomes the clear limiting factor as resolution climbs, while the i7-13700K's 5.40 GHz boost clock and 30 MB of shared L3 cache sit largely underutilized in a simulation title that rarely stresses all 24 threads simultaneously. The data shows a combo ranked 1583 out of 1769 tested configurations, placing it in the bottom 11% of all pairings — a position driven almost entirely by the GPU's modest specifications rather than the processor's strengths.

Resolution Scaling

The measured FPS drop from 1080p to 4K is steep and revealing. At 1920x1080 with Low settings, the system achieves 156.6 FPS, but at 3840x2160 with the same settings, that falls to 52 FPS — a 66.8% reduction. This scaling pattern is typical of a GPU-bound scenario: the RTX 3050's 4 GB frame buffer and 128-bit memory interface cannot feed the pixel throughput demanded by 4K, even in a simulation game with relatively simple geometry.

Moving from 1440p to 4K at Medium settings illustrates the same trend: 71.2 FPS at 2560x1440 drops to 34.3 FPS at 3840x2160, a 51.8% decline. The gap narrows at higher quality presets because the GPU is already saturated — at Ultra settings, 1440p yields 50.6 FPS while 4K produces 26.6 FPS, a 47.4% decrease. The data implies that the RTX 3050's rendering pipeline becomes the bottleneck well before 4K, with the CPU's headroom never coming into play. At 1080p Low, the 156.6 FPS result suggests the GPU still has some capacity, but the 4K Low figure of 52 FPS indicates that resolution scaling outpaces the GPU's fill rate capabilities.

The i7-13700K's 3.40 GHz base clock and 5.40 GHz boost clock are more than sufficient for this title; the benchmark results indicate that even at 1080p, the frame rates are constrained by the GPU's 7.127 TFLOPS FP32 throughput rather than any CPU limitation. Interestingly, the scaling from 1080p to 1440p at Low settings — 156.6 to 101.8 FPS, a 35% drop — is less severe than the 1440p to 4K drop of 48.9%, suggesting the GPU's memory bandwidth becomes progressively more critical as pixel count rises.

GPU Role

The RTX 3050 4 GB plays the dominant role in these results, and its specifications explain why. With only 4 GB of GDDR6 memory on a 128-bit bus, the card delivers 192.0 GB/s of bandwidth — sufficient for 1080p and even 1440p in many titles, but marginal for 4K. The 8 nm Ampere chip, GA107, runs at a 1545 MHz base clock and boosts to 1740 MHz, producing a pixel rate of 55.68 GPixel/s and a texture rate of 111.4 GTexel/s. These figures are modest by 30-series standards, and the 2048 shading units, 64 TMUs, and 32 ROPs reflect a deliberately cut-down design.

The card's 16 ray tracing cores and 64 tensor cores are present but offer little benefit in a simulation game that primarily relies on rasterization. The 4 GB memory capacity is the most telling constraint: at 4K Ultra, the system manages only 26.6 FPS, and at 4K High, 29.1 FPS — both figures hovering near playability thresholds but falling short. The GPU's 90 W TDP and 250 W suggested PSU indicate a low-power design, yet the benchmark results show that power efficiency does not compensate for raw throughput limitations. At 1080p Ultra, the 77.6 FPS result is respectable, but the drop to 50.6 FPS at 1440p Ultra highlights how quickly the card's resources are exhausted.

The GPU's 50th percentile ranking among all GPUs places it exactly in the middle of the pack, which aligns with the measured FPS: playable at 1080p, acceptable at 1440p with lowered settings, and struggling at 4K. The 12 Gbps effective memory speed, while typical for GDDR6, cannot offset the narrow 128-bit bus width, and the data suggests that any resolution above 1440p will stress the card beyond its comfortable operating range.

FAQ

Q: Why does the frame rate drop so sharply from 1080p to 4K?

A: The RTX 3050's 4 GB memory and 192.0 GB/s bandwidth become saturated as pixel count increases. At 1080p Low the system hits 156.6 FPS, but at 4K Low it falls to 52 FPS — a 66.8% reduction that reflects the GPU's limited fill rate rather than any CPU constraint.

Q: Is the Intel Core i7-13700K holding back performance in this game?

A: No. The CPU's 16 cores and 24 threads, with a 5.40 GHz boost clock, are far more capable than the GPU. At 1080p Ultra, the system produces 77.6 FPS, which is GPU-limited; the processor's 3dmark max-thread score of 12412 indicates ample headroom for this simulation title.

Q: What settings provide the best balance of visual quality and frame rate at 1440p?

A: Medium settings at 2560x1440 yield 71.2 FPS, which is smoother than the 50.6 FPS at Ultra. The jump from Medium to High at 1440p — 71.2 to 48.9 FPS — shows a steep cost for modest visual gains, making Medium the practical choice for this resolution.

Q: Can this combo handle 4K gaming?

A: Only at Low settings, where it reaches 52 FPS. At Medium it drops to 34.3 FPS, and at High or Ultra it falls below 30 FPS (29.1 and 26.6 respectively). The data indicates 4K is only viable with minimal quality settings.

Q: How does this combo rank against other tested configurations?

A: It ranks 1583 out of 1769 combos, placing it in the bottom 11% of all tested pairings. This low rank is attributable to the GPU's mid-pack 50th percentile standing, not the CPU, which sits in the 93rd percentile among all processors.

Q: Why is the 1080p Low result so much higher than other settings?

A: At 1080p Low, the GPU's load is minimized, allowing the system to reach 156.6 FPS. The CPU's high single-thread performance — a 3dmark single-thread score of 1136 — helps, but the 50%+ FPS drop when moving to Medium (113.1 FPS) shows the GPU's limits are quickly reached as quality increases.

Measured FPS Breakdown

At 1920x1080, the system delivers its strongest results across all settings. Low settings produce 156.6 FPS, Medium drops to 113.1 FPS, High yields 80.5 FPS, and Ultra manages 77.6 FPS. The gap between High and Ultra is narrow — just 2.9 FPS — suggesting that Ultra's additional graphical effects are nearly free at this resolution, while the step from Low to Medium costs 43.5 FPS, indicating a significant GPU workload increase.

Moving to 2560x1440, the pattern shifts. Low settings still deliver a playable 101.8 FPS, but Medium falls to 71.2 FPS, High drops to 48.9 FPS, and Ultra bottoms out at 50.6 FPS. Interestingly, Ultra outperforms High at 1440p by 1.7 FPS, which is within measurement variance but suggests the settings presets do not scale linearly with GPU load. At 4K, the results are grim: Low yields 52 FPS, Medium 34.3 FPS, High 29.1 FPS, and Ultra 26.6 FPS. The spread from Low to Ultra at 4K is 25.4 FPS, demonstrating that the GPU's 4 GB memory becomes the absolute constraint regardless of quality preset.

The data reveals that 1080p is the only resolution where all settings exceed 60 FPS, with 1440p only achievable at Low or Medium settings, and 4K requiring Low settings for a playable frame rate. The 4K Ultra result of 26.6 FPS is the worst measured, but the 4K High figure of 29.1 FPS is not meaningfully better, indicating the GPU is fully saturated at that resolution.

How This Combo Ranks

With a combo rank of 1583 out of 1769 tested configurations, this pairing sits near the bottom of the database. The 11th-percentile position is driven almost entirely by the RTX 3050's 50th percentile GPU ranking — the card is average among all GPUs, but when paired with a top-tier CPU like the i7-13700K, the imbalance becomes apparent. The CPU's 93rd percentile ranking among all CPUs means it is in the top 7% of processors, yet the measured FPS in this game reflect the GPU's limitations.

The delta between CPU and GPU capability is stark: the i7-13700K's nearest rivals include the Core i7-13700KF (avg score 47334, delta -0.1%) and Ryzen 9 PRO 5945 (avg score 47527, delta -0.5%), all within a fraction of a percent of each other. This CPU is clearly not the bottleneck. The GPU has no nearest rivals listed, but its 50th percentile standing means half of all GPUs perform better. In a simulation game that is not CPU-intensive, this combo's rank reflects the GPU's inability to translate the CPU's power into higher frame rates.

The rank also suggests that many cheaper or more balanced CPU-GPU pairings would outperform this combination in Pc Building Simulator. The data implies that the i7-13700K's capabilities are wasted here — the game simply does not require 16 cores, and the GPU becomes the sole determinant of performance.

Settings Recommendations

For a smooth experience at 1080p, Ultra settings are viable at 77.6 FPS, though High at 80.5 FPS offers nearly identical performance with slightly less visual fidelity. The 2.9 FPS difference between High and Ultra makes Ultra the better choice for 1080p, as it provides the best visuals without a meaningful FPS penalty. At 1440p, Medium settings at 71.2 FPS provide the best balance — Low at 101.8 FPS is smoother but visually inferior, while High drops to 48.9 FPS, which may feel less fluid. The data suggests Medium is the sweet spot for 1440p, offering a 45.6% FPS improvement over High while retaining acceptable visual quality.

For 4K, only Low settings are recommended, as 52 FPS is the sole result above 30 FPS. Medium at 34.3 FPS is borderline playable, but the drop to 29.1 FPS at High and 26.6 FPS at Ultra makes those presets impractical for consistent gameplay. If 4K is required, Low is the only sensible choice; otherwise, dropping to 1440p with Medium settings provides a significantly better experience. The 1080p Ultra setting is the default recommendation for this combo, as it achieves above 60 FPS while maximizing the GPU's capabilities without overwhelming its 4 GB memory buffer.

CPU Role

The Intel Core i7-13700K's specifications far exceed the demands of Pc Building Simulator. With 16 cores (8 performance and 8 efficiency, implied by the 24 threads), a 3.40 GHz base clock, and a 5.40 GHz boost clock, this Raptor Lake-S processor delivers exceptional single-threaded performance — evidenced by its 3dmark single-thread score of 1136 and Geekbench single-core score of 2850. The 30 MB shared L3 cache and 2 MB per-core L2 cache provide ample data locality for a game that simulates PC building rather than rendering complex scenes.

The CPU's 125 W TDP and 10 nm process node (Intel's own fabrication) place it among the most powerful desktop processors available, with a 93rd percentile ranking among all CPUs. Its nearest rivals include the Core i7-13700KF (avg score 47334, delta -0.1%) and EPYC 4364P (avg score 47131, delta 0.3%), showing that the i7-13700K performs within 0.5% of its closest competitors. However, in this game, the CPU's Cinebench R23 multicore score of 39000 and Passmark multithread score of 45887 are irrelevant — the game's simulation logic does not scale to 24 threads.

The benchmark results indicate that the CPU is never the limiting factor. Even at 1080p Low, where the system reaches 156.6 FPS, the CPU is not maxed out; the bottleneck shifts to the GPU's pixel throughput. The i7-13700K's integrated UHD Graphics 770 is present but unused, as the discrete RTX 3050 handles all rendering. For this game, the CPU's role is to feed the GPU with draw calls and simulation data, which it does effortlessly — the measured FPS are a direct reflection of GPU performance, not CPU capability. The data suggests that a significantly weaker CPU would produce nearly identical frame rates in this title, confirming that the combo's low rank is a GPU issue, not a processor issue.

Hardware Specifications

Intel Core i7-13700K

Cores / Threads 16 / 24
Base Clock 3400 MHz
Boost Clock 5400 MHz
TDP 125W
Socket Intel Socket 1700
View Full CPU Details →

NVIDIA GeForce RTX 3050 4 GB

VRAM 4 GB GDDR6
Base Clock —
Boost Clock 1740 MHz MHz
TDP 90 WW
View Full GPU Details →

FPS Benchmarks by Resolution & Settings

Performance data for Intel Core i7-13700K + NVIDIA GeForce RTX 3050 4 GB in Pc Building Simulator

Resolution Settings Avg FPS
3840x2160 Low 52.0
3840x2160 Medium 34.3
3840x2160 High 29.1
3840x2160 Ultra 26.6
2560x1440 Low 101.8
2560x1440 Medium 71.2
2560x1440 Ultra 50.6
2560x1440 High 48.9
1920x1080 Low 156.6
1920x1080 Medium 113.1
1920x1080 High 80.5
1920x1080 Ultra 77.6

Pc Building Simulator with RTX 3050 4 GB + Other CPUs

See how Pc Building Simulator performs with the same GPU but different processors.

Other Games with ii7-13700K + RTX 3050 4 GB

Explore FPS benchmarks for other games using this same hardware combination.