Pc Building Simulator

The Intel Core i5-12600KF and NVIDIA GeForce RTX 4070 Ti combination delivers a wide performance envelope in Pc Building Simulator, with measured frame rates ranging from 68 FPS at 4K Ultra to 394 FPS at 1080p Low. This pairing occupies rank 451 out of 3,723 tested combos, placing it in the top 12% of configurations, and the data shows a system that remains fluid across all tested resolutions and settings, though the scaling patterns reveal a clear shift in bottleneck behavior as resolution increases.

CPU Role — cores, clocks, and how they relate to this game's results

The Core i5-12600KF brings 10 cores and 16 threads to the simulation, with a base clock of 3.70 GHz and a boost clock of 4.90 GHz. This Alder Lake-S part, built on Intel's 10 nm process, operates on the LGA 1700 socket and supports both DDR4 and DDR5 memory through a dual-channel interface. The cache hierarchy includes 80 KB of L1 per core, 1.25 MB of L2 per core, and 20 MB of shared L3 cache. The processor's benchmark profile shows strong multithreaded capability: Cinebench R23 multicore reaches 23,391 points, while the single-core result is 3,302 points, and Geekbench multicore scores 12,137.

In the context of Pc Building Simulator, the CPU's role is most evident at lower resolutions where frame rates climb past 300 FPS. At 1080p Low, the combo produces 394 FPS, and at 1080p Medium it hits 305 FPS — both figures far beyond typical display refresh rates. The CPU's 3DMark scores reinforce this: 7,956 in the 16-thread test and 7,952 at max threads, indicating that even heavily threaded workloads are handled with headroom. The PassMark multithread score of 27,575 and single-thread score of 3,925 place this chip at the 79th percentile among all CPUs, meaning that in a simulation game that relies on physics calculations and object interactions, the 12600KF is unlikely to be the limiting component at 1080p.

However, the data suggests that the CPU's influence wanes as resolution climbs. At 4K, the frame rate drops to 71 FPS on High and 68 FPS on Ultra, which is a much smaller gap between settings than at 1080p where Ultra (205 FPS) trails Low (394 FPS) by 189 FPS. This pattern indicates that at higher resolutions, the GPU takes over as the primary constraint, while the CPU's 10 cores and 16 threads remain sufficient to feed the graphics card without becoming a bottleneck. The processor's nearest rivals — the Core i9-10900K, Ryzen 5 8500GE, Ryzen 7 6800U, and Ryzen 7 5800X3D — all sit within 0.3% of the 12600KF's average benchmark score of 27,799, showing that this chip is competitive with a wide range of older and newer parts. For a game like Pc Building Simulator, which is not known for extreme CPU demands, the 12600KF provides ample compute headroom even at the highest settings.

GPU Role — VRAM, clocks, and how they relate to this game's results

The RTX 4070 Ti is built on the Ada Lovelace architecture with the AD104 chip, fabricated on TSMC's 5 nm process with 35,800 million transistors. It carries 12 GB of GDDR6X memory on a 192-bit bus, delivering 504.2 GB/s of bandwidth. The GPU's base clock is 2310 MHz, boosting to 2610 MHz, while memory runs at 1313 MHz (21 Gbps effective). The shader configuration includes 7,680 shading units, 240 texture mapping units, and 80 raster output pipelines, along with 60 ray tracing cores and 240 tensor cores. Pixel rate is 208.8 GPixel/s and texture rate is 626.4 GTexel/s, with FP32 performance at 40.09 TFLOPS.

The GPU's benchmark results show it at the 84th percentile among all GPUs, with an average score of 44,795. Its nearest rivals include the RTX 5090 Mobile (0.8% higher), Radeon Pro 5500 XT (1.3% higher), RTX A6000 (1.6% lower), and Arc A730M (1.7% higher) — a mixed group that underscores the 4070 Ti's position in the upper mid-range tier. In Pc Building Simulator, the GPU's role becomes dominant at 4K resolution. At 4K Ultra, the combo produces 68 FPS, which is playable but not high-refresh territory. At 4K High, the average is 71 FPS, and at 4K Medium it reaches 101 FPS with a minimum of 86 FPS and maximum of 116 FPS. The 12 GB VRAM capacity is more than sufficient for this simulation's texture requirements, as evidenced by the smooth scaling from Low to Ultra settings.

The GPU's memory bandwidth of 504.2 GB/s appears to be a significant factor at 4K, where the frame rate at Low (142 FPS) is more than double that at Ultra (68 FPS). This 74 FPS gap between Low and Ultra at 4K contrasts with the 189 FPS gap at 1080p, indicating that at 4K, the GPU's compute and memory throughput are being fully exercised. The RTX 4070 Ti's FP32 performance of 40.09 TFLOPS and its 60 RT cores provide the raw processing power needed to maintain 60+ FPS at 4K Ultra, but the data shows that users seeking higher refresh rates at 4K would need to step down to Medium settings, which more than doubles the performance to 101 FPS.

FAQ

*Q: What is the highest average frame rate this combo achieves in Pc Building Simulator?*

A: The highest measured average is 394 FPS, achieved at 1920x1080 with Low settings.

Q: How does this combo perform at 4K Ultra compared to 1080p Ultra?

A: At 4K Ultra, the average frame rate is 68 FPS, while at 1080p Ultra it reaches 205 FPS — a difference of 137 FPS, showing substantial resolution scaling impact.

Q: What is the minimum frame rate recorded across all tested configurations?

A: The only configurations with recorded minimum FPS are the Medium settings: 86 FPS at 4K, 164 FPS at 1440p, and 259 FPS at 1080p. The lowest minimum is 86 FPS at 4K Medium.

Q: How does this combo rank among all tested combinations in this game?

A: The combo ranks 451st out of 3,723 tested combinations, placing it in the top 12.1% of all configurations.

Q: Which resolution and settings produce exactly 100+ FPS with a recorded minimum?

A: 4K Medium produces 101 FPS average with a minimum of 86 FPS, while 1440p Medium produces 193 FPS with a minimum of 164 FPS, and 1080p Medium produces 305 FPS with a minimum of 259 FPS.

Q: What is the frame rate difference between Low and Ultra at 1440p?

A: At 2560x1440, Low produces 272 FPS while Ultra produces 130 FPS, a difference of 142 FPS.

Measured FPS Breakdown

At 1920x1080, the combo delivers its strongest performance across all settings. Low settings produce 394 FPS average, Medium produces 305 FPS with a minimum of 259 and maximum of 351, High produces 215 FPS, and Ultra produces 205 FPS. The progression from Ultra to Low shows a 189 FPS spread, with each step down in settings yielding diminishing returns: Ultra to High is 10 FPS, High to Medium is 90 FPS, and Medium to Low is 89 FPS.

At 2560x1440, the frame rates remain high but show more sensitivity to settings. Low settings produce 272 FPS, Medium produces 193 FPS with a minimum of 164 and maximum of 222, High produces 136 FPS, and Ultra produces 130 FPS. The spread between Low and Ultra is 142 FPS, with the Ultra-to-High gap shrinking to just 6 FPS, while High to Medium is 57 FPS and Medium to Low is 79 FPS.

At 3840x2160, the GPU becomes the clear limiting factor. Low settings produce 142 FPS, Medium produces 101 FPS with a minimum of 86 and maximum of 116, High produces 71 FPS, and Ultra produces 68 FPS. The Low-to-Ultra spread narrows to 74 FPS, and the High-to-Ultra gap is only 3 FPS, indicating that the GPU is saturated at these settings. The Medium preset at 4K offers the best balance in this resolution, providing 101 FPS with a recorded minimum of 86 FPS, which is above the 60 FPS threshold for smooth gameplay.

Resolution Scaling

The frame rate drop from 1080p to 4K is dramatic and reveals the bottleneck shift. At Low settings, 1080p produces 394 FPS, which drops to 272 FPS at 1440p (a 31% decrease) and then to 142 FPS at 4K (a 48% decrease from 1440p). At High settings, the progression is 215 FPS at 1080p, 136 FPS at 1440p (a 37% drop), and 71 FPS at 4K (a 48% drop from 1440p). At Ultra settings, 1080p yields 205 FPS, 1440p yields 130 FPS (a 37% drop), and 4K yields 68 FPS (a 48% drop from 1440p).

The percentage drop from 1440p to 4K is consistently around 48% across Low, High, and Ultra settings, while the drop from 1080p to 1440p ranges from 31% at Low to 37% at High and Ultra. This consistent 4K penalty suggests that the RTX 4070 Ti's 12 GB VRAM and 504.2 GB/s bandwidth are adequate for the resolution, but the GPU's compute throughput — 40.09 TFLOPS FP32 — becomes the limiting factor. The fact that the 1440p-to-4K drop is nearly identical across all settings indicates that the GPU is fully utilized at 4K regardless of graphical complexity, whereas at 1080p and 1440p, the CPU has enough headroom to push higher frame rates when settings are lowered.

The scaling pattern also shows that the CPU is not a bottleneck at any resolution. If the CPU were limiting, the frame rate would not scale as cleanly with resolution; instead, we see a near-linear relationship between pixel count and performance at lower settings. At 4K Low (142 FPS) versus 1080p Low (394 FPS), the 4K pixel count is exactly 4 times higher, and the frame rate drops to 36% of the 1080p value — close to the inverse of the pixel ratio, confirming that the GPU is the sole constraint at 4K.

Settings Recommendations

For users with a 1080p display, the Ultra preset at 205 FPS is the best choice, as it delivers maximum visual fidelity while still providing more than triple the refresh rate of a standard 60 Hz monitor. The High preset at 215 FPS offers only a 10 FPS advantage over Ultra, making Ultra the superior option for 1080p. At 1440p, Ultra at 130 FPS remains excellent for high-refresh monitors, and the 6 FPS difference between High and Ultra makes Ultra the recommended setting. The Medium preset at 193 FPS provides a substantial margin for users with 240 Hz displays, but the visual trade-off is not necessary for most users.

At 4K, the recommendation changes significantly. Ultra at 68 FPS is playable but leaves no headroom for demanding scenes, while High at 71 FPS is nearly identical. The Medium preset at 101 FPS with a minimum of 86 FPS is the sweet spot, offering a 33% improvement over High while maintaining a minimum above 60 FPS. The Low preset at 142 FPS is the only 4K option that approaches high-refresh territory, but the visual compromise is substantial for a simulation game that relies on reading text and interface elements. For 4K users, Medium provides the best balance of visual quality and performance, with the measured minimum of 86 FPS ensuring smooth gameplay even in complex scenes.

How This Combo Ranks

The Intel Core i5-12600KF and NVIDIA GeForce RTX 4070 Ti combination holds rank 451 out of 3,723 tested combos in Pc Building Simulator, placing it in the top 12.1% of all configurations. This rank reflects the combo's ability to maintain high frame rates across the board: even at the most demanding 4K Ultra setting, it stays above 60 FPS, and at 1080p it exceeds 200 FPS on every preset. The CPU's 79th percentile ranking among all processors and the GPU's 84th percentile ranking among all GPUs combine to create a system that is well-balanced for this simulation title.

In comparison to other combos, this rank of 451 suggests that while the hardware is strong, there are 450 configurations that achieve higher aggregate performance in this game. The nearest CPU rivals — including the Ryzen 7 5800X3D and Core i9-10900K — have nearly identical average scores (within 0.3%), which means that the ranking difference is likely driven by GPU selection rather than CPU choice. Similarly, the RTX 4070 Ti's nearest GPU rivals, such as the RTX A6000 and Radeon Pro 5500 XT, show that the GPU is positioned in a competitive band where small performance differences translate to meaningful rank changes. The data indicates that this combo is a high-performing configuration that would be suitable for users seeking 4K gaming at high settings with occasional drops to Medium for higher refresh rates, and it comfortably handles 1440p at maximum settings with frame rates above 130 FPS.