Pc Building Simulator

Pc Building Simulator presents an interesting case for the AMD Ryzen 9 5900X and NVIDIA GeForce RTX 4070 Ti combination. The benchmark data shows a system that is overwhelmingly capable at standard resolutions, with performance scaling that reveals the GPU as the primary bottleneck as resolution increases. The measured frames per second across the board are exceptionally high, indicating that this pairing is well-suited for the simulation genre, which often involves complex physics and logic calculations alongside rendering duties.

Resolution Scaling

The frame rate data across the three tested resolutions shows a clear and predictable pattern of performance degradation as pixel count increases, which is typical for a system where the graphics card becomes the limiting factor at higher loads. At 1080p, the system is heavily CPU-bound, with the Low preset achieving an average of 352 FPS. This high ceiling suggests the Ryzen 9 5900X's processing power is not being fully utilized by the game's rendering engine at this resolution. Moving to the High preset at 1080p, the average drops to 215.7 FPS, a significant reduction that shows the increased graphical workload is starting to engage the GPU more substantially.

Stepping up to 1440p, the scaling becomes more pronounced. The Low preset average falls to 269.9 FPS, which is still remarkably high but represents a 23.3% decrease from the 1080p Low result. At the High preset, the 1440p average is 137.6 FPS, a 36.2% drop from the 1080p High figure. This pattern indicates that the RTX 4070 Ti is now becoming the primary performance limiter, as the CPU has enough headroom to handle the increased draw calls and physics calculations, but the GPU's rendering throughput is being taxed by the higher resolution.

The jump to 4K (3840x2160) solidifies the GPU-bound nature of this configuration. The Low preset at 4K produces an average of 142.4 FPS, which is actually lower than the 1440p High preset result. This is a stark illustration of the rendering cost associated with 4K resolution. The High preset at 4K averages 69.8 FPS, and the Ultra preset drops further to 67.8 FPS. The difference between the High and Ultra presets at 4K is minimal, with only a 2.9% variance. This suggests that at this resolution, the additional graphical features in the Ultra preset are not the primary source of performance cost; rather, the sheer pixel count is overwhelming the GPU's fill rate and memory bandwidth.

How This Combo Ranks

In the grand scheme of tested hardware combinations for this game, the AMD Ryzen 9 5900X and NVIDIA GeForce RTX 4070 Ti pairing secures the 232nd position out of 1769 tested combos. This places it in the top 13.1% of all configurations, indicating a high-performance tier. This ranking is not a reflection of any weakness in the components, but rather evidence of the sheer number of more powerful, and likely more recent, hardware combinations that have been benchmarked.

The data suggests that this combo is well above the median performer, placing it in the upper echelon of systems capable of running this simulation. The rank is likely influenced by the game's modest system requirements, which means even mid-range hardware can achieve high frame rates. The combination of a high-core-count CPU and a fast GPU ensures that the system can handle both the simulation logic and the graphical output simultaneously, which is crucial for a game like this. The fact that it sits in the 232nd spot out of 1769 indicates that while it is not the absolute fastest, it is certainly a high-tier performer that will provide a smooth experience in nearly all scenarios.

GPU Role

The NVIDIA GeForce RTX 4070 Ti is the central component in determining the visual experience at higher resolutions. Its 12 GB of GDDR6X memory on a 192-bit bus provides a bandwidth of 504.2 GB/s, which is a critical specification for handling the large texture datasets often used in simulation games. The benchmark results show that this memory configuration is sufficient for all tested presets, as the frame rates do not indicate any memory-related stuttering or capacity limitations.

The GPU's clock speeds are also a relevant factor. With a base clock of 2310 MHz and a boost clock of 2610 MHz, the RTX 4070 Ti demonstrates that it can sustain high frequencies under load. This is reflected in the 4K Medium preset result of 101.9 FPS, which is a 43.1% improvement over the High preset at the same resolution. This significant jump suggests that the GPU's compute units and texture units are heavily utilized, and reducing the graphical fidelity from High to Medium provides substantial relief. The performance difference between the 1440p and 4K High presets—137.6 FPS versus 69.8 FPS—is a 49.3% reduction, highlighting the immense work the GPU must perform to render the additional pixels. The GPU's 60 RT cores and 240 tensor cores are present, but Pc Building Simulator's benchmark data does not isolate ray tracing or DLSS performance, so their specific impact on these results cannot be quantified.

FAQ

Q: What is the average frame rate at 1080p with High settings?

A: The average frame rate at 1920x1080 with the High preset is 215.7 FPS.

Q: How much performance is lost when moving from 1440p to 4K at High settings?

A: The average frame rate drops from 137.6 FPS at 2560x1440 to 69.8 FPS at 3840x2160, which is a 49.3% decrease in performance.

Q: Is the CPU or GPU the limiting factor at 4K resolution?

A: The data indicates the GPU is the limiting factor. At 4K, the frame rate varies significantly between presets (from 67.8 FPS on Ultra to 142.4 FPS on Low), showing that graphical load directly impacts performance, a sign of GPU limitation.

Q: What is the best performance result recorded for this combo?

A: The highest average frame rate recorded is 352 FPS, achieved at 1920x1080 resolution with the Low settings preset.

Q: How does the combo rank among all tested configurations?

A: This specific combination of CPU and GPU ranks 232nd out of a total of 1769 tested combos for this game.

Q: What is the difference in average FPS between the High and Ultra presets at 1440p?

A: At 2560x1440, the High preset achieves 137.6 FPS, while the Ultra preset achieves 129.9 FPS, a difference of 7.7 FPS.

Settings Recommendations

Based on the measured frame rates, the optimal settings depend heavily on the user's display resolution and refresh rate. For users with a 1080p display, the High preset at 215.7 FPS is an excellent choice, as it provides a high level of visual fidelity while still delivering frame rates well above the refresh rate of most monitors. The Ultra preset at 1080p still achieves 205.2 FPS, so users with a 240Hz or higher refresh rate monitor can enable it without sacrificing the fluidity of the experience.

At 1440p, the High preset delivers 137.6 FPS, which is ideal for high-refresh-rate gaming. The Ultra preset at 129.9 FPS is also viable, making it the best choice for users who prioritize visual quality and have a 120Hz or 144Hz monitor. The Medium preset at 191.9 FPS is a good fallback for those seeking even higher frame rates, but the visual trade-off from High is likely not worth the performance gain for most users.

For 4K resolution, the situation is more nuanced. The High preset at 69.8 FPS is playable, but the Medium preset at 101.9 FPS offers a much smoother experience with a 46% performance uplift. Given that the visual difference between High and Medium at 4K is often less perceptible than at lower resolutions, the Medium preset is recommended as the best balance for a smooth 4K experience. The Ultra preset at 67.8 FPS is only marginally slower than High, suggesting that users who can tolerate High can also tolerate Ultra. However, the Medium preset is the recommended choice for 4K due to its significant frame rate advantage.

CPU Role

The AMD Ryzen 9 5900X provides the computational foundation for this system, and its specifications are well-suited for a simulation game. With 12 cores and 24 threads based on the Zen 3 architecture, this CPU has substantial parallel processing capability. The base clock of 3.70 GHz and boost clock of 4.80 GHz ensure strong single-threaded performance, which is often critical for game logic and physics calculations. The 64 MB of L3 cache is a large pool that helps reduce memory latency for frequently accessed data.

The benchmark results show that the CPU is not the primary bottleneck in most scenarios. At 1080p Low, the system achieves 352 FPS, which is a very high ceiling that suggests the CPU can feed the GPU with data faster than the GPU can render at lower resolutions. The CPU's performance in synthetic benchmarks, such as a Cinebench R23 multicore score of 33150 and a Geekbench single-core score of 2202, corroborates its capability. The 3DMark 16-thread score of 9075 and the 2-thread score of 1852 show a strong scaling pattern, indicating the CPU can effectively utilize its multiple cores.

The fact that performance degrades significantly with resolution and preset increases points to the GPU becoming the limiting factor, while the CPU maintains a consistent level of performance. The CPU's 90th percentile ranking among all processors further confirms its high standing. In this game, the Ryzen 9 5900X ensures that the simulation logic, AI, and background processes are handled without causing frame drops, allowing the RTX 4070 Ti to work at its full potential. The data suggests that the CPU provides a stable platform that will not hold back the GPU in this title, even at the lowest settings.