Pc Building Simulator

Pc Building Simulator, a simulation title focused on PC assembly, proves to be a demanding benchmark that scales significantly with graphical settings. The pairing of the AMD Ryzen 7 5800XT with the NVIDIA GeForce RTX 4060 produces a wide range of frame rates, from highly playable at 1080p to borderline at 4K. This analysis breaks down the measured performance data to understand the bottlenecks and optimal configurations for this specific hardware combination.

Resolution Scaling

The measured FPS data reveals a clear and pronounced impact from resolution scaling, indicating that the graphics card becomes the primary limiting factor as pixel count increases. At 1080p with Ultra settings, the combo delivers an average of 126.2 FPS, which drops to 81 FPS at 1440p and further to 45.1 FPS at 4K. This represents a 35.8% performance decrease when moving from 1080p to 1440p, and a 44.3% decrease from 1440p to 4K. Such a steep drop-off pattern is characteristic of a GPU-bound scenario, where the RTX 4060's 8 GB of GDDR6 memory and 128-bit memory bus are increasingly strained by higher resolutions.

The trend is consistent across all settings. With High settings, the average frame rate falls from 135.7 FPS at 1080p to 82.4 FPS at 1440p (a 39.3% reduction), and then to 45.3 FPS at 4K (a 45.0% reduction from 1440p). The relative performance gap between 1440p and 4K remains substantial, suggesting that the GPU's compute and memory bandwidth limits are hit hard at 4K regardless of the visual preset. In contrast, the scaling from 1080p to 1440p, while significant, shows that the CPU still has enough headroom to feed the GPU at the lower resolution.

Looking at the Low settings, the pattern intensifies. At 1080p Low, the combo achieves 266.3 FPS, a figure that highlights the CPU's strong single-thread performance. However, this drops to 170.2 FPS at 1440p and 88.9 FPS at 4K. The 47.8% performance drop from 1080p to 1440p at Low settings, compared to the 35.8% drop at Ultra, suggests that at Low settings, the GPU becomes the bottleneck even at 1440p. The data indicates that as resolution increases, the load shifts entirely to the RTX 4060, making it the definitive limiting component for 4K gameplay in this simulation title.

CPU Role

The AMD Ryzen 7 5800XT plays a supporting but crucial role in this configuration, ensuring that the GPU is not starved of data at lower resolutions. This 8-core, 16-thread processor based on the Zen 3 architecture has a base clock of 3.80 GHz and a boost clock of 4.80 GHz. Its benchmark scores, such as a Cinebench R23 multi-core score of 23794 and a single-core score of 3359, indicate a high level of processing power that is well-suited for simulation games that often require significant CPU logic for system state management.

The CPU's influence is most evident in the 1080p Low results, where the frame rate reaches 266.3 FPS. This high figure is a direct result of the processor's strong single-thread performance, as the graphics card is not yet a limiting factor. The 3dmark single_thread score of 959 and the 3dmark_2_threads score of 1879 demonstrate the CPU's capability to handle the game's primary game logic thread efficiently. At this resolution and setting, the CPU is likely the primary driver of performance, allowing the GPU to render frames as fast as possible.

However, as resolution increases, the CPU's role diminishes. At 4K, even with Low settings, the frame rate halves to 88.9 FPS compared to 1080p. This indicates that the GPU's rendering workload becomes so heavy that the CPU's ability to prepare frames is no longer the limiting factor. The CPU's 32 MB of L3 cache and support for DDR4 memory with 51.2 GB/s bandwidth are sufficient to keep the pipeline fed, but they do not prevent the GPU from becoming the bottleneck at higher resolutions. The data shows a classic balance: the CPU enables extreme frame rates at 1080p, but the GPU dictates the ceiling at 1440p and 4K.

FAQ

Q: What is the highest average frame rate this combo achieves in Pc Building Simulator?

A: The highest measured average frame rate is 266.3 FPS, achieved at 1920x1080 resolution with Low settings.

Q: Can this hardware combination handle 4K gaming in this title?

A: The data shows that 4K performance is limited. At 4K with Ultra settings, the average frame rate is 45.1 FPS, and with Low settings, it reaches 88.9 FPS. While playable on some displays, it does not reach the high refresh rates seen at lower resolutions.

Q: How does the CPU compare to its nearest rivals in synthetic benchmarks?

A: The Ryzen 7 5800XT has an average benchmark score of 29774. Its nearest rival, the AMD Ryzen 7 PRO 5755GE, scores 29740, making the 5800XT 0.1% faster. It is also 0.3% faster than the AMD Ryzen 7 6800HS and AMD Ryzen 7 7840H, and 0.3% slower than the AMD Ryzen AI 7 PRO 360.

Q: What is the performance difference between High and Ultra settings at 1440p?

A: At 2560x1440, the High preset yields an average of 82.4 FPS, while the Ultra preset yields 81 FPS. The difference is minimal, with Ultra being only 1.7% slower than High.

Q: Is the RTX 4060 a significant bottleneck at 1080p?

A: No, at 1080p the CPU appears to be the more active contributor. The frame rate difference between Low (266.3 FPS) and Ultra (126.2 FPS) is substantial, indicating that the GPU workload is scaling, but the CPU is capable of delivering high frame rates when the GPU load is low.

Q: How does this combo rank among all tested configurations for this game?

A: This specific CPU and GPU combination ranks 991st out of 1769 tested combos in Pc Building Simulator, placing it in the middle of the database.

Measured FPS Breakdown

The measured FPS data provides a complete picture of performance across all standard resolution and setting combinations. At 1920x1080, the combo delivers an average of 126.2 FPS on Ultra, 135.7 FPS on High, 191.5 FPS on Medium, and 266.3 FPS on Low. The scaling from Ultra to Low shows a 110.8% performance increase, indicating that the game is highly sensitive to settings at this resolution.

Moving to 2560x1440, the averages are 81 FPS on Ultra, 82.4 FPS on High, 116.5 FPS on Medium, and 170.2 FPS on Low. The difference between Ultra and High is negligible at 1.4 FPS, but the jump to Medium provides a 43.8% improvement over Ultra. At 3840x2160, the averages drop significantly: 45.1 FPS on Ultra, 45.3 FPS on High, 62.9 FPS on Medium, and 88.9 FPS on Low. The data shows that at 4K, even the jump from Ultra to Medium yields a 39.5% performance boost, but the frame rates remain below the 60 FPS threshold for Ultra and High.

The most notable observation from this breakdown is the consistent performance parity between High and Ultra settings across all resolutions. At 1080p, the difference is 9.5 FPS (7.5%), at 1440p it is 1.4 FPS (1.7%), and at 4K it is 0.2 FPS (0.4%). This suggests that the Ultra preset may introduce additional effects that are not heavily taxing on the RTX 4060, or that the High preset is already very demanding. Conversely, the Medium preset offers a substantial performance uplift over High, making it a key setting for achieving higher frame rates.

How This Combo Ranks

In the comprehensive database of tested hardware combinations for Pc Building Simulator, this pairing of the AMD Ryzen 7 5800XT and NVIDIA GeForce RTX 4060 sits at rank 991 out of 1769 total combos. This places it in the 56th percentile of all tested systems, meaning it outperforms more than half of the configurations but is outclassed by a significant portion of the higher-end setups. The rank is a holistic measure, considering performance across all resolutions and settings.

The CPU itself holds a strong position in the broader market, with a percentileVsAllCpus score of 86, indicating it is faster than 86% of all tested processors. Its average benchmark score of 29774 is nearly identical to its nearest rivals, with the AMD Ryzen 7 PRO 5755GE and AMD Ryzen AI 7 PRO 360 being within 0.3% of its performance. The GPU, however, has a lower percentileVsAllGpus score of 66, which is consistent with the observed bottleneck at higher resolutions. The RTX 4060's average benchmark score of 23181 is closely matched by the AMD Radeon RX 6600M, which is 0.6% faster, and the Intel Arc B580, which is 0.7% slower.

This rank suggests that while the combo is competent, it is not a top-tier performer for this simulation title. The mid-pack ranking is likely due to the RTX 4060's limitations at 4K, which drags down the overall average performance across all tested configurations. The CPU's strength ensures competitive results at 1080p and 1440p, but the GPU's 8 GB memory capacity and 128-bit bus prevent the combo from achieving higher rankings in a game that appears to scale heavily with GPU resources.

Settings Recommendations

Based on the measured FPS data, the optimal settings for this hardware combination depend on the user's target resolution and frame rate preference. For 1080p gaming, the Ultra preset is viable, delivering 126.2 FPS, which is suitable for high-refresh-rate monitors. The High preset at 135.7 FPS offers a marginal 7.5% improvement with little visual difference, making it a slightly better choice for those prioritizing frame rate. For maximum performance, the Low preset at 266.3 FPS is available, but it likely sacrifices significant visual fidelity.

At 1440p, the recommendation is clearer. The High preset, at 82.4 FPS, provides a smooth experience for most players, and the Ultra preset, at 81 FPS, is nearly identical. The data shows that the Ultra preset is not worth the negligible performance cost, so High is the best choice for balanced visuals and performance. The Medium preset at 116.5 FPS is an excellent option for those who want to push higher refresh rates, offering a 41.4% performance increase over High while likely maintaining decent visual quality in a simulation game.

For 4K, the choices are more constrained. The Ultra and High presets, at 45.1 and 45.3 FPS respectively, are below the 60 FPS target and may feel less fluid. The Medium preset at 62.9 FPS is the only setting that breaks the 60 FPS barrier, making it the recommended choice for 4K play. The Low preset at 88.9 FPS is the only way to achieve a high refresh rate at this resolution, but it requires significant visual compromises. The data indicates that 4K is not this combo's strong suit, and users should expect to use Medium settings or lower to maintain playable frame rates.