Pc Building Simulator

Pc Building Simulator is a simulation title that responds strongly to both CPU and GPU resources, and the tested configuration of an AMD Ryzen 7 5700X3D paired with an NVIDIA GeForce RTX 5090 delivers exceptionally high frame rates across all tested settings. The data shows a combination that ranks 140th out of 1769 tested combos, placing it in the top 8% of all configurations for this game. The measured results reveal a system capable of exceeding 200 FPS at 1080p and maintaining playable performance even at 4K Ultra, though the scaling patterns indicate where each component's influence begins and ends.

FAQ

Q: How does this CPU compare to its nearest rivals in overall benchmark performance?

A: The AMD Ryzen 7 5700X3D has an average benchmark score of 24673, which places it 0.2% ahead of the Intel Core i7-1360P (24627) and 0.3% ahead of the AMD Ryzen 5 7600X3D (24605). It trails the AMD Ryzen AI Max 385 by 0.6%, which scores 24811. The differences are minimal, indicating near-identical aggregate performance among these four processors.

Q: What frame rates can be expected at 1440p with High settings?

A: The measured data shows an average of 169.2 FPS at 2560x1440 with High settings. This represents a substantial drop from the 229.3 FPS seen at 1080p High, but the frame rate remains well above the threshold for smooth gameplay on high-refresh-rate monitors.

Q: Is the RTX 5090 significantly faster than its closest GPU competitors?

A: The NVIDIA GeForce RTX 5090 has an average benchmark score of 84306. It is essentially tied with the RTX 5090 D (84241, 0.1% slower) and the RTX 5050 Mobile (84171, 0.2% slower). It outperforms the AMD Radeon PRO W6600 by 1.3%, which scores 83209, but the NVIDIA CMP 40HX is 1.6% faster with a score of 85637.

Q: How does the frame rate change when moving from 1080p to 4K at Ultra settings?

A: At 1920x1080 Ultra, the average frame rate is 226.4 FPS. Moving to 2560x1440 Ultra drops this to 161.2 FPS, a reduction of 65.2 FPS. At 3840x2160 Ultra, the average falls to 87.9 FPS, which is less than half the 1080p result and indicates a strong GPU load at higher resolutions.

Q: What is the best preset for maximizing frame rate at 4K?

A: The Low preset at 3840x2160 yields the highest average frame rate of 174.6 FPS. Medium produces 123.7 FPS, while both High and Ultra deliver nearly identical results at 87.6 and 87.9 FPS respectively. For the highest refresh rates at 4K, Low is the only preset that breaks the 170 FPS barrier.

Q: Does the CPU bottleneck the GPU in this game?

A: The data suggests the CPU becomes a limiting factor at lower resolutions. At 1080p Low, the system achieves 298.2 FPS, while at 1440p Low it reaches 258.9 FPS and at 4K Low it hits 174.6 FPS. The relatively small drop from 1080p to 1440p at Low settings, compared to the larger drop to 4K, indicates that CPU performance caps the frame rate until the GPU load becomes significant at higher resolutions.

GPU Role

The NVIDIA GeForce RTX 5090 is the dominant component in this configuration, built on the Blackwell 2.0 architecture with 32 GB of GDDR7 memory on a 512-bit bus. The memory subsystem provides 1.79 TB/s of bandwidth, which is critical for feeding the 21760 shading units and 176 ROPs at high resolutions. The GPU's 104.8 TFLOPS of FP32 compute and boost clock of 2407 MHz drive the raw rendering throughput, while the 170 RT cores and 680 tensor cores handle advanced effects in games that support them.

In Pc Building Simulator, the GPU's role becomes increasingly pronounced as resolution scales. At 1080p, the measured frame rates across all presets are remarkably high, ranging from 226.4 FPS at Ultra to 298.2 FPS at Low. The differences between presets at 1080p are relatively modest, suggesting the CPU is keeping the GPU well-fed but also limiting the absolute ceiling. At 1440p, the spread widens: Low produces 258.9 FPS while Ultra drops to 161.2 FPS, showing the GPU starting to feel the load of higher pixel counts.

The 4K results reveal the RTX 5090's true performance envelope in this title. At 3840x2160, the Low preset still manages 174.6 FPS, which is an impressive figure for 4K. However, the jump from Low to Medium costs 50.9 FPS (down to 123.7), and the move to High or Ultra halves the Low preset's performance, landing at 87.6 and 87.9 FPS respectively. This pattern shows that the GPU's memory bandwidth and compute resources are ample for the game's geometry and textures, but the shader complexity and fill-rate demands of the higher presets at 4K push the card to its limits. The fact that High and Ultra produce nearly identical frame rates at 4K suggests the game's Ultra preset does not add significant GPU work beyond High in this specific scenario.

Resolution Scaling

The measured frame rates across the three tested resolutions provide a clear picture of how this configuration scales with pixel count. At High settings, the system delivers 229.3 FPS at 1080p, 169.2 FPS at 1440p, and 87.6 FPS at 4K. The transition from 1080p to 1440p reduces performance by 26.2%, while the move from 1440p to 4K cuts the frame rate by 48.2%. This non-linear scaling indicates that the GPU becomes the primary bottleneck as resolution increases, with the 4K pixel count (8.3 million pixels) demanding significantly more fill-rate and memory bandwidth than 1440p (3.7 million pixels).

The Low preset shows a different scaling behavior. From 298.2 FPS at 1080p, the frame rate drops to 258.9 FPS at 1440p (a 13.2% reduction) and then to 174.6 FPS at 4K (a 32.6% reduction from 1440p). The relatively small drop from 1080p to 1440p at Low settings suggests the CPU is the limiting factor in this region, as the GPU has ample headroom when using simpler shaders. The larger drop to 4K indicates the GPU load finally becomes significant even at Low quality settings.

Ultra settings present the steepest scaling curve. The system produces 226.4 FPS at 1080p, 161.2 FPS at 1440p, and 87.9 FPS at 4K. The 28.8% reduction from 1080p to 1440p and the 45.5% reduction from 1440p to 4K show that Ultra settings amplify the GPU's workload at every resolution. The 4K Ultra result of 87.9 FPS is just 38.8% of the 1080p Ultra score, demonstrating that the RTX 5090's performance is heavily taxed by the combination of maximum quality and high pixel density. The data indicates that Pc Building Simulator is primarily GPU-bound at 1440p and above, while at 1080p the Ryzen 7 5700X3D's single-thread and multi-thread capabilities keep the GPU sufficiently occupied.

Settings Recommendations

For players targeting the highest refresh rates, the Low preset at 1080p delivers the maximum measured frame rate of 298.2 FPS. This configuration takes full advantage of the RTX 5090 while minimizing GPU load, though the CPU's 3.00 GHz base clock and 4.10 GHz boost clock still limit the absolute ceiling. At 1440p, the Low preset produces 258.9 FPS, which remains excellent for competitive play on 240Hz monitors. The Medium preset at 1440p offers a balanced option at 228.5 FPS, providing improved visual quality while still exceeding 200 FPS.

For 4K gaming, the recommendation depends on the target frame rate. The Low preset achieves 174.6 FPS at 3840x2160, which is ideal for high-refresh-rate 4K displays. However, the Medium preset at 123.7 FPS still provides smooth gameplay on standard 120Hz panels, and the visual improvement over Low is likely worth the 50.9 FPS cost. The High and Ultra presets at 4K both hover near 88 FPS, which is suitable for 60Hz displays with ample headroom for frame time consistency, but they do not take full advantage of the RTX 5090's capabilities.

The data suggests that the Ultra preset offers no meaningful benefit over High in this game. At 1080p, Ultra produces 226.4 FPS versus 229.3 FPS for High, a negligible difference of 2.9 FPS. At 1440p, Ultra's 161.2 FPS is 8 FPS slower than High's 169.2 FPS. At 4K, the two presets are virtually identical at 87.9 and 87.6 FPS. Given that High and Ultra deliver nearly identical performance across all resolutions, players should select High to avoid any potential visual artifacts or stability issues that might accompany the Ultra preset, while gaining essentially the same frame rate.

How This Combo Ranks

The combination of the AMD Ryzen 7 5700X3D and NVIDIA GeForce RTX 5090 achieves a rank of 140 out of 1769 tested combos in Pc Building Simulator. This places the configuration in the top 7.9% of all tested systems, indicating that it is a high-end pairing that delivers exceptional performance in this simulation title. The rank reflects the synergy between the CPU's 96 MB of shared L3 cache and the GPU's massive 32 GB frame buffer, which together handle the game's asset streaming and rendering demands efficiently.

The CPU's average benchmark score of 24673 places it in the 82nd percentile of all CPUs, while the GPU's average score of 84306 puts it in the 94th percentile of all GPUs. The combination of a top-decile GPU with an above-average CPU results in a system that excels in GPU-bound scenarios but is slightly constrained in CPU-bound situations at low resolutions. This is evident in the measured frame rates, where the 1080p Low result of 298.2 FPS does not reach the 300 FPS mark, likely due to CPU limitations rather than GPU capabilities.

Compared to the nearest rival CPUs, the Ryzen 7 5700X3D's performance is nearly identical to the Intel Core i7-1360P, AMD Ryzen 5 7600X3D, and AMD Ryzen AI Max 385, with deltas no greater than 0.6%. This means that swapping to any of these processors would produce negligible changes in frame rates, assuming the same RTX 5090 is used. Similarly, the GPU's nearest rivals show performance differences under 1.6%, so the RTX 5090's rank is not significantly threatened by the RTX 5090 D or RTX 5050 Mobile. The overall combo rank of 140 reflects the near-top-tier GPU performance combined with a solidly upper-midrange CPU, making this configuration a strong choice for Pc Building Simulator at any resolution, with the understanding that the GPU is the primary driver of the high frame rates observed in the test data.